Right when your steel hauler needs a vacation you are suddenly blessed with an abundence of the poor mans gold. Out there somewhere,someone is looking out for you, life is good.
So, I got my buddy's truck. Made money with it immediately. Then the alternator went out, had to wait 3 days for it to come in (!!!), and now have to wait for tomorrow to change it out. Jeeze! But it is nice being able to load things without a (reasonable) height restriction. Now off to watch the video!
hell yea give your friend a purple bag. i watch your adds the whole way through to give you larger ad revenue. it's about giving. when we give we receive blessings.
Crazy Canadian Bohemian Cousin, you need your truck back. A lot of good junk you are finding!!!! I guess that maple leaf bottom plate turned out to be a good luck charm after all....
My day started out kind of crummy, but an hour hanging with Thub brightened it right up. Thanks, Thub. (Glad you got the clippers. After all this time, the old ones were just too dull.)
If you like dumpster diving at home renovations then you should go to your local building department. They usually have a list of building permits with address and type of construction happening, also a good place to see where electrical work is happening. Then you will know where to go in the future
Dude remember your PPE inhaling all those particles will catch up with you down the road. Amazon you can pick yourself up a hand crank wire stripper for $80 and drill powered for around $100
I’m having hernia surgery Wednesday next week I’m wire hunting hard because I just bought a stripmeister to keep me busy while I heal. Thanks for the great videos happy hunting hopefully shorts weather is around the corner for you
Bro please hold the grinder with two hands at all times, you need to invest in a bench vice so you can always cut safely, just don’t want to see you cop a cutting disk to the apposite arm ❤ stay scrapping
Cadmium? Watch Our Every Day Living, Tim is quite resourceful with his wife, June working right beside him. Am not sure where they are actually located in Australia. Poly Prophet, Melbourne, does a great job of scrapping. He has the best scrap piles that are nicely located in front of residences. Be safe out there.
Watching this right now at home, at 12 AM. My Pontiac Vibe is in my buddies garage overnight. We're replacing the fuel injectors tomorrow because gas had been spewing out of the engine and collecting in boiling gas pools on top of the engine... NOT GOOD! Anyways, I'm without the Vibe tonight, but there just so happens to be an open top less than a mile from me right now that over the last 6 months has produced Hundreds of kilograms of non-ferous metal. I have a large backpack, I do believe I'll go for a walk right about now...🚶♂️
I've done scrapping for several years. I find the taps you have in Canada made very cheap. I have never come across taps like that in the UK. They are always solid brass.
Seeing you process the scrap reminds me of spending Saturday’s at my dads yard cleaning copper, cutting off joints and soldering to make into clean copper with bolt cutters, I was about 8 at the time😂 also if he got any strippable wire he would give it to me to strip and scrap and I got the money, it’s crazy how young I was but great memories
I remember when I was a kiddo and my cousins and I would go around collecting bottles for 10-15 cents each in Texas. Back in 80’s. Would take them to local HEB grocery store to customer service in a drop bin and that was nice and convenient! Unfortunately most states here in US no longer pay like they do I guess in Canada 🍁. They just rely on people to throw them in recycling bin placed at the curb. Great vid as always brother! I’ve actually been inspired by you, Mike the Scavenger as well as Scrap and pallet Man to start my own scavenging business with UA-cam channel coming soon!!! Blessings to you and yours brother!
I have the set of those side cutters, pliers and needle nose. Unfortunately the side cutters froze up on me a few weeks ago bit they worked great while they lasted.
I do hope you succeed in getting both autos completely fixed by the end of your snow season, which is coming up. It will have you sitting in good shape for warmer weather
rob the scrap man weeki wachee Florida,question for you why don't you take the power boxes with the pipe the small parts are the same price and less room you had them in your hand and tossed them instead of keeping them ???
I went out today and picked up 4 vacuum cleaners, 2 box fans and an AC. I don't have the space to keep magnetic metal and it would cost me more in gas than I would make per trip so I give it all away.
haha neatly bundled up poles, it's almost as if they knew you were coming 🙂👍 I got literally a vehicle full of light fittings last dive and it turned into a nice weigh in after a little processing too, I think that we will get more and more as people switch over to the more energy efficient LED ones. Right place at the right time indeed, I'd start singing with cable scores like that! Oh man, you threw the board back in with all the relays with silver contacts in, that makes micro scrappers like me cry 😜Wow 10 and 25cents each for bottles and cans is amazing, I so wish they did that in the UK!! I know what it is like scrapping in a smaller vehicle 😉Nice payday 👍 (I really thought we were going to witness some super claw action when he was trying to get that mixing bowl out but alas no, shame 😂)
BTW those boxes of wire are probably for Cat5 or Cat6 Ethernet. You can probably sell it for more than it's scrap value given a full box is worth around $300ish for a 1000' of wire.
Fingers crossed ill have a job at my local scrappy be able to load out at 730 am then again on lunch as its 2 miles from my house and a mile down the road on foot for now. The amount of Hoover's ive scrapped big name ones you can sell parts to repairers ive go 20£ for a Dyson cylinder.
Need to make a friend at the trash bin company, they maybe could tip you off to where there bins are at. Save some driving around, maybe, good video thummer. Good day all God bless
Having multiple dumpsters on multiple apartment complexes I have several connections with scrappers I pay to haul away the treasure. Street scrappers get upset but not enough to procure simple insurance so I can allow them in the dumpsters or better the apartment cleanouts.
Hay their thumb. I a couple of weeks ago bought this one bad blade for my angle grinder that is carbide tipped. I would recommend it to you for when you have to cut the copper/aluminum of the ends of radiators. I would recommend you try one for yourself. Only downside is it has bigger chips. Keep working hard and making money.
good day sir. water heaters. depending on the tech used for control, if it has a programmable electronic board on it, then there will be sensors and wire under the insulation. usually 12-14 gauge. the tank itself may be valuable to some scrappers, if they are into chemistry. in my town, we have a huge manganese problem in our water supply, resulting in massive deposits in aged water heater tanks. I have recovered over 50 lbs in a single tank.
Great haul buddy! I had a “wire type of night” last night. Every once in a while, I’ll find stashes of it like it comes in waves, lol. Last week I found 4 brand new 2000 ft spools of cat-6 sitting right on top as I opened a dumpster! It’s amazing how much valuable stuff gets thrown out!!
So personal questions what is your full time job then? Scrapping is the hobby I get that and with the amount of snow u get scrapping in the shop is something to do.
For your romex, if ya free a little bit of the free copper in the middle and just pull it along the length of it it will cut the jacket and free the other 2 at the same time instead of running the knife through it like that.
The heavy duty greenish hardend polystyrene looks like what fits into an ammo box. 1 or 2 large rounds used to be stored within usually brownish well built ammo boxes
What I really respect about this person is that he cleans up his mess after scrapping and searching for metal!
He’s real kind hearted nothing but respect
@@timnavarrette6932 Yea!
👍
I really wish all the lower 48s would offer money for bottles, maybe then people would stop throwing them on our roadsides.
Most of America is woefully behind in recycling efforts, including offering deposits for bottles and cans.
In Nairobi Kenya, were currently doing 10 bucks a pound for copper so yeah. its a sweet deal
Working to fix up the vehicle adds a pretty cool twist to your videos. That being said, I'll be glad when you get your dang truck back.
Did I miss any updates for the truck?
Came to the comments to say this!
Right when your steel hauler needs a vacation you are suddenly blessed with an abundence of the poor mans gold. Out there somewhere,someone is looking out for you, life is good.
Was watching non farrius Jeff from Florida he has a guy that scraps with a bike and small trailer does very good
Holy hell lots of good stuff!!
I love love love watching you take stuff apart. Your commentary is so good.
So, I got my buddy's truck. Made money with it immediately. Then the alternator went out, had to wait 3 days for it to come in (!!!), and now have to wait for tomorrow to change it out. Jeeze! But it is nice being able to load things without a (reasonable) height restriction.
Now off to watch the video!
Stumbled onto your channel. Great The Office reference. Keep up the good work.
That was a great 2 day ride with you and friend made good cash awesome time
I'd pick up a $10 bill off the ground.
That's a great return for the time you invested in those bottles and cans.
hell yea give your friend a purple bag. i watch your adds the whole way through to give you larger ad revenue. it's about giving. when we give we receive blessings.
Crazy Canadian Bohemian Cousin, you need your truck back. A lot of good junk you are finding!!!!
I guess that maple leaf bottom plate turned out to be a good luck charm after all....
Every little bit adds up
My day started out kind of crummy, but an hour hanging with Thub brightened it right up. Thanks, Thub. (Glad you got the clippers. After all this time, the old ones were just too dull.)
Thanks again molly! Don’t think for a second I’m throwing the other ones out 😆
I have so much respect for you. You don’t the right things. Inspiration.
I recycle on foot I carry snips and screwdriver but the channel locks great idea thanks
If you like dumpster diving at home renovations then you should go to your local building department. They usually have a list of building permits with address and type of construction happening, also a good place to see where electrical work is happening. Then you will know where to go in the future
Always enjoy the ride along with Thub. That first dumpster was fantastic. 👍
I i la i i bb. I o. I in but b. Jhhh😅😊i j ji j bi
Sim,foi fantástica,mas deixou muita coisa para trás.
ooo yay, Fresh upload right after my premier, sweet, I can watch at time of release for a change👍
I learn so much from your videos- your enthusiasm, attitude and identification of 'what's good" are all so valuable!
Yeah you should get the mazda truck back. Its the heart of the channel :)
Very interesting to watch. Thanks.
Take the good with the bad
Thanks for what you do😊 Hi from New Zealand
Mission: "trash picking to find some great stuff"
Thub 2023
The wheelweights in the bucket you skipped there are a special cathegory at the yard, and pay decent!
I thought they were wheel weights too at first. Its actually cigarette butts.
Oh, well they don’t pay equally good! 😂
30:50 giant shop vac lol
Dude remember your PPE inhaling all those particles will catch up with you down the road. Amazon you can pick yourself up a hand crank wire stripper for $80 and drill powered for around $100
Can’t wait till you get the truck back
I’m having hernia surgery Wednesday next week I’m wire hunting hard because I just bought a stripmeister to keep me busy while I heal. Thanks for the great videos happy hunting hopefully shorts weather is around the corner for you
That's good $$$$$ for 2Day,s ,,,,Weldone
Great Job..hello from Croatia 🇭🇷👋
Nice score! I wish we got paid for plastic bottles here in south FL
in califrornia u get between $125 to $300 every other month for my cans and bottles
Same here in New Orleans
@@joeigneczi2524 Nice!
@@ProjectShopFl I made $220 from can and bottles and $180 from my scrap metal
Bro please hold the grinder with two hands at all times, you need to invest in a bench vice so you can always cut safely, just don’t want to see you cop a cutting disk to the apposite arm ❤ stay scrapping
Glad to see you again! Now waiting for the next video 🕺🏻
Just started collecting worthwhile metal wires etc its fun watching your content
Thank you for taking us along on the dumpster diving.
You always have the best luck finding scrap!!! Awesome 👍
Have a great weekend Thub! Love that wire. I just hauled in a bunch of ali wire.
Omg. @ the fan and flashlight part. I can't watch anymore. That's was crazy.
Cadmium? Watch Our Every Day Living, Tim is quite resourceful with his wife, June working right beside him. Am not sure where they are actually located in Australia. Poly Prophet, Melbourne, does a great job of scrapping. He has the best scrap piles that are nicely located in front of residences. Be safe out there.
Watching this right now at home, at 12 AM. My Pontiac Vibe is in my buddies garage overnight. We're replacing the fuel injectors tomorrow because gas had been spewing out of the engine and collecting in boiling gas pools on top of the engine... NOT GOOD! Anyways, I'm without the Vibe tonight, but there just so happens to be an open top less than a mile from me right now that over the last 6 months has produced Hundreds of kilograms of non-ferous metal. I have a large backpack, I do believe I'll go for a walk right about now...🚶♂️
They just let rummage through the dumpsters just like that.I always get run off
that was a great break of my sufjan stevens songs, my dog thought it sounded cute
DAMN! Good day of diving.
Thats cool that you all get paid for plastic bottles. I could make a living off that alone. Lol
I've done scrapping for several years. I find the taps you have in Canada made very cheap. I have never come across taps like that in the UK. They are always solid brass.
📌Four wheels in a heartbeat 💓 should be your opening line to all your scrap run videos.
Great day(s) scrapping! Entertaining to watch as always, keep doing the thing! 👍
God bless 🙏🏼🇺🇸🇨🇦
Great scrap runs. Interesting to see what’s inside and if worth scrapping more Thanks
we have similar bottle/can deposit, but its 10 for everything, 2 or more sets of tools definately makes things easier
Seeing you process the scrap reminds me of spending Saturday’s at my dads yard cleaning copper, cutting off joints and soldering to make into clean copper with bolt cutters, I was about 8 at the time😂 also if he got any strippable wire he would give it to me to strip and scrap and I got the money, it’s crazy how young I was but great memories
Appreciate your videos Thub
'We got 4 wheels and a heartbeat' , yeeup, life is good! ❤
Hey there Thub! Another great video, like always!! 😀🙂😎
I remember when I was a kiddo and my cousins and I would go around collecting bottles for 10-15 cents each in Texas. Back in 80’s. Would take them to local HEB grocery store to customer service in a drop bin and that was nice and convenient! Unfortunately most states here in US no longer pay like they do I guess in Canada 🍁. They just rely on people to throw them in recycling bin placed at the curb. Great vid as always brother! I’ve actually been inspired by you, Mike the Scavenger as well as Scrap and pallet Man to start my own scavenging business with UA-cam channel coming soon!!! Blessings to you and yours brother!
Great video
Old water heaters and high end have ones have copper tanks. In any case check the name plate. It indicates the tank metal.
Good info! Thanks 😊
I have the set of those side cutters, pliers and needle nose. Unfortunately the side cutters froze up on me a few weeks ago bit they worked great while they lasted.
I do hope you succeed in getting both autos completely fixed by the end of your snow season, which is coming up. It will have you sitting in good shape for warmer weather
Those were some great dumpster dives! Never 'pshaw' the wire, though. It's easy to deal with and can add up fast.
The road to becoming a UA-camr is long and arduous but you have to keep working hard go for it
Great trip along you and a good payday ❤
Why do I find someone scratching around in a dumpster such compelling viewing ?
Keep up the good work
rob the scrap man weeki wachee Florida,question for you why don't you take the power boxes with the pipe the small parts are the same price and less room you had them in your hand and tossed them instead of keeping them ???
First 😊
A hole hour.
Man perfect way to wind down with a beer a a special cigarette after a long week.
All hail Thub
gottem
A hole hour? That sounds like something to be avoided 😅
Yet you still went to the effort of making a comment. Nothing better to do with your time?
We get paid for cans bottles too in finland 15 c cans 20 bottles and 40 for 2l bottles great incentive
I went out today and picked up 4 vacuum cleaners, 2 box fans and an AC. I don't have the space to keep magnetic metal and it would cost me more in gas than I would make per trip so I give it all away.
Save the cords up break down the radiator, cut out compressors and copper and motors is what I’d do to make that worth it
@@christinamarie4054 I keep the motors, cords, copper, and brass. I just give the bulky magnetic metals away.
Thats a nice haul. Ya gotta love all that wire.
That circuit board you threw back in had a bunch of relays on it and they have silver contacts inside
32:22 those plug ends are usually brass
Great pickings, especially with the prices high
A whole hour with Thub? YES!!!!! 👍🙂
Seeing Calgary scrap prices at the end of the video is getting me excited to bring my stock pile in! Awesome video as always sir👍
haha neatly bundled up poles, it's almost as if they knew you were coming 🙂👍 I got literally a vehicle full of light fittings last dive and it turned into a nice weigh in after a little processing too, I think that we will get more and more as people switch over to the more energy efficient LED ones. Right place at the right time indeed, I'd start singing with cable scores like that! Oh man, you threw the board back in with all the relays with silver contacts in, that makes micro scrappers like me cry 😜Wow 10 and 25cents each for bottles and cans is amazing, I so wish they did that in the UK!! I know what it is like scrapping in a smaller vehicle 😉Nice payday 👍 (I really thought we were going to witness some super claw action when he was trying to get that mixing bowl out but alas no, shame 😂)
Some scrappers haven't learned their trade well!
BTW those boxes of wire are probably for Cat5 or Cat6 Ethernet. You can probably sell it for more than it's scrap value given a full box is worth around $300ish for a 1000' of wire.
Fingers crossed ill have a job at my local scrappy be able to load out at 730 am then again on lunch as its 2 miles from my house and a mile down the road on foot for now. The amount of Hoover's ive scrapped big name ones you can sell parts to repairers ive go 20£ for a Dyson cylinder.
Bushmills good Northern Ireland whisky
It's a whisky that costs alot here in Northern Ireland I would say its more in Canada
Why are you saving the plastic bottles?
Great video fellow panda ! 🎉
Need to make a friend at the trash bin company, they maybe could tip you off to where there bins are at. Save some driving around, maybe, good video thummer. Good day all God bless
Having multiple dumpsters on multiple apartment complexes I have several connections with scrappers I pay to haul away the treasure. Street scrappers get upset but not enough to procure simple insurance so I can allow them in the dumpsters or better the apartment cleanouts.
That’s an interesting idea, registering a business and getting insurance could really expand the opportunities
Hay their thumb. I a couple of weeks ago bought this one bad blade for my angle grinder that is carbide tipped. I would recommend it to you for when you have to cut the copper/aluminum of the ends of radiators. I would recommend you try one for yourself. Only downside is it has bigger chips. Keep working hard and making money.
good day sir. water heaters. depending on the tech used for control, if it has a programmable electronic board on it, then there will be sensors and wire under the insulation. usually 12-14 gauge. the tank itself may be valuable to some scrappers, if they are into chemistry. in my town, we have a huge manganese problem in our water supply, resulting in massive deposits in aged water heater tanks. I have recovered over 50 lbs in a single tank.
Great haul buddy! I had a “wire type of night” last night. Every once in a while, I’ll find stashes of it like it comes in waves, lol. Last week I found 4 brand new 2000 ft spools of cat-6 sitting right on top as I opened a dumpster! It’s amazing how much valuable stuff gets thrown out!!
And i wish we had the bottle return in aotearoa ..solve two problems at once
Guess it is better than some other countries burn tires to process metals.
Looks like a wire dance is better exercise than a pole dance.
You could have taken the handles off those night stands and sold them on Ebay.
Some of them are actually brass
So personal questions what is your full time job then? Scrapping is the hobby I get that and with the amount of snow u get scrapping in the shop is something to do.
For your romex, if ya free a little bit of the free copper in the middle and just pull it along the length of it it will cut the jacket and free the other 2 at the same time instead of running the knife through it like that.
The heavy duty greenish hardend polystyrene looks like what fits into an ammo box. 1 or 2 large rounds used to be stored within usually brownish well built ammo boxes
FYI The filament in those flurescent lightbulbs is pure silver ..makes a mess but good money
Your yards are different than those down here. Ours don't really make as many distinctions between materials, ie, the ferrous stuff.
Bro I’m if you was in New Orleans especially after a hurricane man me and my brother would love to have you here
You piss me off sometimes for CS, its even bundled up for you.
When you're stripping the romex with the knife, you should anchor one end in your vice and pull tight as you cut.
You need a little aluminum ladder. For ergonomic reasons.