Tig Welding Stainless Steel Small Bore Pipe / 5G Keyhole Techniques / 1 Inch SCH10
Вставка
- Опубліковано 5 жов 2024
- Subscribe-
/ weldhagojibi
-
Instagram (Instagram).-
/ weldhagojibi
-
Hello everyone.
Today I welded a small stainless pipe.
Various welding techniques can be applied even when welding stainless small diameter pipes.
Today, one of them is featured in a video.
It will be an interesting experience to apply the keyhole technique when welding small pipes in 5G position.
Thanks for watching.
Please take good care of your health.
#5G
#Keyhole
#welding
#stainless
#small
#pipe
#TIG
와 이걸 다보여주시네 ㄷㄷㄷ 정말 대단합니다. 제가 예전에 배울때는 인터넷에는 암만 뒤져봐야 학원광고뿐이어서 현장에서 생으로 배웠는데 그때도 선생님 같은 유튜버가 있었다면 정말 더배우기 쉬웟을것 같네요
Hago, these videos have helped me so much at work, and nobody else covers some of these techniques. Thanks man, keep doing what you do.
2
Хочу выразить большую благодарность человеку, который составляет субтитры к видео, ты лучший 1000-кратное спасибо!
Friend, may the god you believe in bless you. your way of explaining is the best. I only speak Spanish but thank you because I can translate the audio for you and I understand everything perfectly. welding is a very beautiful art. helps personal growth builds character well used humility is learned. welding has done a great job on you as a person. thank you for sharing so much valuable knowledge. Greetings from the beautiful country Colombia in South America. around here many of us look at you I always recommend you to my colleagues.
Вы лучший наставник из всех что я видел по аргонной сварке труб!!! 👍👍👍
감사합니다 전에 4인치 스케줄10짜리
시험봤다 떨어졌는데ㅋ
이미지트레이닝 열심히해서 다시 시도해보겠습니다..늘 감사합니다..^^
Thank you for these videos.
You are unique and unattainable, the art of welding in its pure state. Great.
Estoy asombrado con la educación la forma de hablar la forma de dirigirse las personas tan amable tan respetuosa eso es asombroso lo felicito ustedes un maestro de la soldadura yo no sé soldar con argón no sé si está pero me gusta su canal Y algún momento determinado aprenderé gracias por su información yo lo cuide y lo bendiga saludos desde Venezuela
Muchas gracias muy bien explicado y lo del cierre también sin esmerilado gracias por tus consejos y el Root pass le quedo muy bien 👍 😉
유모아 최고이신 강사 입니다.😁💞
One more time , nothing to say ... No failures , you ' re the killer of welder :) Long way to you
Корень отличный ,ставлю👍
These videos are so informative. I really appreciate you for doing this. This will help me alot to practice.
Buen trabajo
Gracias por compartir tus conocimientos
소주 맛이 최고에요 잘 배우고 잇어요
감사 함니다
I'm glad I'm not the only one who finds1 1/2 inch Sch10 to be unusually complicated due to the small diameter and thermal conductivity. All of your techniques were very good, the only thing I do differently is use a .045 rod for the cover pass because i find I have to use a lot of heat to melt the bigger rods, but your technique of keeping the rod in the puddle the entire time seemed to work and gave you a nice convex finish. Great work as always. Cheers to the soju portion, heh heh
Thank you
Gracias por la información en un video pasado yo habia comentado algo sobre la soldadura en tuberia de diámetros pequeños. Lo que hizo falta fue la información como q amperaje usaste la posición del tungsteno y diametro de la tobera. Igual es muy excelente trabajo💪💪
La longitud de tungsteno se estableció lo más corta posible. Y el resto de la información se muestra en el video. Gracias por el gran comentario.
Great info thank you!..
Канал самый лучший!
Отличная работа Джин 👏
Thanks!
Yes brother...yours video is too much good..i like your welding videos...❤👍👍 ...keep it up.
Good job
Thank video tig welding 2G
Спасибо Джин! Как всегда на высоте!
너무 대단하세요. 형님 짱!
👍👍👍👍👍👍лучший!!!!!!
My father retired from a career as a welder in the nuclear energy industry in the US. He said that gloves aren't enough. He built up a 'finger' of insulation that he put over the glove to keep the heat to a manageable level. He didn't suggest 'soju', but my grandfather who retired from his job in a steel foundry did talk about 'vodka' as being a good solution.
Bravo!!
Black stallion t50 best gloves I’ve used for tig and won’t stain your shirts
obrigado por mais esse ensinamento e tempo desprendido a nós.
Hay đấy bạn, tôi cũng đã từng hàn mới hàn to hơn ngón tay cái một chút nhưng không có khe hở tưởng không đẹp nhưng đẹp không tưởng bạn ơi,
hello sir, I am here to listen and learn, always success, sir
👍👍👍좋은 영상 감사합니다!!! 최고!!
You are so good: after lockdown I lost my old job (tig welder on aluminum radiators/intercoolers) cause automotive is struggling; on 1st september i start my new job as tig welder on stainless steel, for sanitary/medical field, it's a lot different 10 to 16/10 thickness material and the welding pool is so different from aluminum, also the way the rod feeds the pool, it's not easy man for me, coming from alu; i hope i can get better and maybe as good as you are one day. Meanwhile your vids are helping me a lot, thanks and keeo up the great job, very informative.
I'll have to learn how to walk the cup, that's annoying man😓
you can also just laywire the root on schedule 10 stainless. It is easier and faster for me than dip keyhole. tack it with 3/32 gap, it will shrink up a hair and then just lay a 3/32 wire on it. When you heat up the tack just make sure you see the puddle wave at you before you start welding the root out. I use a #8 cup with a tiny stickout about the same as he uses in this video.
@@kwent86 no keyhole bro, the only pipes i will weld will be sanitary pipes, no gap, no chanfer, 1.5/1.6 mm wall thickness, argon purged, with almost no filler metal, they want it to be flush; I'm not used to this light precision jobs, I gotta get better at it; i mean i got the job so i'm good enough, they tested me, but i defenetly need more practise.
Also i'm not used to laywire as well coming from alu
Bom trabalho !!!✌🏻🇧🇷
좋은동영상 감사합니다
정말 좋은 자료 감사합니다^^
muy bueno saludos desde argentina
멋져요 👍
감사,,감사,,
Muito bom. Gostei e aprendi.
So good! 1” would be very difficult
That’s a really cool trick increasing the amps to close the gap without using a grinder. 👍🏻 Do you have a video on how you back purged this pipe?
عمل جيد
شكرا
Fantastic
Sim mestre devo dizer que tubos mais fino são difíceis de solda devido a caloria e o manejo também temos que encontrar uma amperagem e ser mais ágil para obter um bom resultado obrigado pela bela apresentação 🇧🇷🙏
Muito bom! Parabéns!👍
감사합니다❤
MAESTRO
Cracking job mate I watch all your videos well done
Soju !👍🏻
Fantastic looking root )
Koren odlično izgleda :)
exelente profesor
멋지네요.
Great job ,but can u welding same size at the 6g position..
Linda gostei muita perfeição eu também sou soldador
E essa profissão eu a amo de mais nois soldador somos artesão por que transformamos o solido em liquido pra poder ficar o desejo do soldado uma solda tig inox linda
Спасибо за видео!
Very good
Saluti dell'Italia caro amico cinese 🇮🇹🇨🇳
thanks you!
Thanks..nice sharing good video..
Sensacional seus vídeos
Круто! Покажи как заварить нержавейку с v-образными кромками встык. Был бы очень благодарен. Ну или ус.
Hello. Why is the wire feed not constant? You serve in portions, dots. What is the best welding wire feeding method?
여보세요. 와이어를 액체 수조에 보관하지 않는 이유는 무엇입니까? 백스프링링을 위해 와이어를 배치로 공급합니까? 어떤 방법이 더 낫습니까?
👍
Thanks Sr. For show to everyone how welder , I’m from Mexico 🇲🇽. You explain. Perfect 👌. Where do you from North Corea. Vietnam 🇻🇳, China. The technology. Help. Thanks 🙏🙏🙏🙏🙏happy marry Christmas 🎄. Happy new year 🎆🎊🎈.
항상너무감사드립니다. 하나궁금한게잇어서 댓글남깁니다. 텅스텐봉굵기가 2.0 2.4 3.2 이렇게잇는걸로알고있는데 그 굵기가 용접에 어떤영향이 잇는지 궁금합니다 ^^ 알려주시면 너무감사하겟습니다.
보통 낮은 전류를 많이 사용하는 현장은 2.4를 사용하구요. 높은 전류를 주로 사용하는 현장은 3.2를 많이 사용합니다. 낮은 전류에 섬세한 용접이 필요할수록 얇은 텅스텐을 사용하고요. 두꺼운건 그반대 입니다. 그 외에도 여러가지가 있지만 참고만 하시고 극단적인곳 이외에는 큰 차이 없습니다.
잘보고갑니다
La purga de gas se puede hacer con cualquier otro gas, como por ejemplo Atal 20?
👍👍👍👍👍
👍👍
잘먹겠습니다. ㅋㅋㅋ
Отлично
Было бы не плохо сделать видео о сварке титановых труб.
Chile 👍👍👍👍👍
Ахренено вы все делаете , но как у сварщика , есть вопрос , а
14 , 12 , трубу на керамики не по катаеш.
do u use a landing or root face when welding pipe. it looks like the edge is sharp but its hard to tell
nice one
야~ 총쏜거 하나또 없이 깨끗하이 나왔네예. 따봉!
Nice
갭이 확보가 되어있는데 굳이 키홀용접을 하는 이유가 있나요??
Please making a video position 6G root pass stainless and carbon, cheers from indonesian
😂😂😂 Korean welding food recipe 😂😂 nice ma
I've been welding sch 10 pipe today for the second slightly smaller than 1" I had the pipe prepped to a feathered edge then put the pipe butt up the the elbow rooted it on 65 amps was a nice root it wasn't too flat I let them cool I dropped the amps to 55 welded some on 60 but I kept getting second repen they was all acceptable but I personally wasn't happy how do i avoid it they was welded down hand I rolled them I did do 1 vertical on the cap and that worked alot better but it was also slower
I also kept the wire in when capping i used 1.6 at first them used 2.4 but was the same so went back to 1.6
👏👏👏
손가락 맛이 좋읍니다^^
휼륭 하십니다
لي سؤال لو سمحت ماذا تقصد بثقب المفتاح؟
NICE
X que no arrancaste sin el punto ? De abajo asi es re facil !!!
always a tricky job , great tips though. Yep you need leather gloves , those look like they are made from rubber , never a good thing heat and rubber.
Such damn interesting :-)
Buenos días. Como es el procedimiento para aser la cámara de protección en tubería inoxidable
A mi me sale el root bn pero nose que es lo q estoy haciendo mal para capearla q no me corre bn
HI, How much amps did you use for the final weld? Thx
용접초보자입니다 궁금한게 있는데요 5G포지션 6G포지션 이런말이 있는데 뭔지 검색해도 나오지가 않네요 ㅜㅜ
Left me wondering what would it taste like...
hello friends, I'm from Indonesia, here to learn.
Cınce mı öğreniyorsun bu oyununu galiba