Just going through all your old stuff because every project is awesome
No bug spray? No problem! INTRODUCING Nulon's 'start ya bastard' spray works even better with fire!
'It's draining my will to live...MILLSYYY' 😬 There were gold nuggets throughout this episode...love it👍
As a fellow mechanic I love the sarcasm "..yeah that why they have so little power, because log manifolds don't work." Freaking key board you tube technicians be like " nah only way to turbo has to be tuned length " Love your work Al keep it up.
i also noticed that. was certain he had the opposite idea when they did the twin turbo ls swap. as long as the runners are big enough the piping almost doesn't matter.
Hard to argue with the Barra 270T - might be a bit primitive here and there around the edges but it's so easy to get power, it all definitely works.
Im not saying that tuned length custom manifolds don't have their place they do and if you are shooting for big power every bit helps, but if you are doing your own install or a basic set up start with a basic log set up, manufactures use them because they get the job done and they are cheaper to mass produce.
Exactly, it's the usual accelerating cost vs diminishing returns equation.
Never seen TurboYoda stress... Those eyes were ready to lazer the engine to explode... Hahaha... TurboYoda Rocks...
it just gets better and better from these guys!!!
Just what I needed on my night shift. Sending love for the UK
good to come home after a hard day and sit down to watch this . good stuff boys
"Theres a couple little spots in here where you can put rust if you've got nowhere else to put it." I'm dying.
wish these were longer, by far best show on youtube.. hands down
This project is freakin awesome guys!!!
40 minutes on refurbishing a set of wheels but only 15 for the best thing on UA-cam? Please continue but make Al’s efforts at least 20-30 mins long. Please. Pretty please. Pretty please with sprinkles and a cherry....
I fully expect to see the Skid Factory become it's own channel. They're killing it with the likes/views,enough to where they probably would make much more revenue over just getting paid by MCM. I mean don't get me wrong MCM is great but I doubt they like this channel getting so much love over....well you know refurbishing wheels....
That refurb episode was great too, Mark could have his own show 👏 mr pointy finger 🤣 love the skidfactory, 20 or 25min would be excellent 🤘
I've been watching a lot of older MCM stuff lately, and it's great seeing how much Al has adjusted to being on camera and how much fun he's having with it.
Loved the straight face sarcasm "That's why they have so little power, because log manifolds don't work" LOL, perfect.
Best car channel on youtube. Al and Woody are great!
We need longer episodes of this turbo yodery!
Skid Factory rules!
Damm these episodes are never long enough...
I love watching yoda thinking 10 steps ahead and then giving the simplest explanation for us to understand
I think what I am enjoying the most about this build is the head scratching, remeasuring and just trying to figure it out. So easy to identify with, we've all been there!
These episodes need to be longer! Cant wait for next one.
The plasma cutter is my favorite tool too. There is nothing more satisfying than cutting metal with the 4th phase of matter.
Thanks for your time! Great additional aussie car show with the mcm crew! We asked for years and now we have the Turbo Yoda show!!!
I would move to Australia just to get apprenticeship at the Skid Factory! The builds and work he does are amazing. Keep these videos coming! 😎💪🏼
My uncle cut the floor to put a v8 in the same model, did all the work himself and it was a beast with fats on the back and all blacked out. He would appreciate what your going through and this was in the late 80s.
My productivity comes to a halt at work when a new video comes out. Love it!
"...all we can do is throw it in there, stare at it, and hope for the best." Al you just gave me motivation for my day!
This is my new favorite show. You guys are doing a great job!
One of the best shows on UA-cam. Love it!
He's using a can of Start ya bastard!!!! Love it!
Sweet Christ. He'll be sitting on top of the turbo!
Kickin ass gentlemen! Bout as extreme as it gets right there..
Still can’t get over how clean that barra is. Like damn!!
I had the same troubles fitting the engine into The Slug... I had it sitting at on a little trolley with wheels and rolled the whole lot under the car and lowered the body over the top and kept cutting until it fit. Then crawled under and made the mounts. The way mine is setup the motor mounts to the chassis and the front end is completely separate and detached. Cool job!!
Fuckin Milsey.
Turbo Yoda is the man I love to watch him work his Magic on these Builds I learn alot from all these videos and On the MIghty Car Mods main Channel too.
You can tell it's winter in 'stralia... Al's wearing a hoodie. With his shorts. 😎
I can't wait to see the finished product this van is going to be fast
I half expected you to decide to put it behind the front seats all together and put a bench in. Keep at it, you'll get there.
Alan you are my hero. If you ever come to Minnesota I will be happy to buy you a pint or two.
This van is going to throw down some epic skids I bet jeez fuggen awesome keep up the good work bro
Best channel on the u tube thingy. Turbo Yoda is a SUPER GENIUS
This would be a nice sleeper on the track as its weight balance will be awesome! Maybe add some suspension upgrades and this will be one heck of a ride!
If Al does something in a way that only Al would do it. Can you call that 'A la Al'?
This really is a very good series and you blokes are brilliant.
Love coming home after work on a Wednesday to watch this .
Keep it up boys
turbo yoda became confident infront of the camera and his videos getting better!!! like to shout this to him!!!!
Such a great show!!
I hope this lasts for a very long time.
Legends, I love the show and can't wait to see this van done.
Super Pumped for this build! Gonna be epic!
Modifying old vans is always making you loose will to live, but when you finish the damn thing the feeling can't be compared!
Love the assie sarcasm all day :)
Check out the face Turbo Yoda makes when he encounters clearance issues :)
As soon as I saw the notification I clicked it, I'm all about the Barra and love this build already!
Such a great project. Thanks for the kick ass content !
Barra Mundy
Such a bummer they were discontinued. Genuinely nice motors. I really wanted to get a few for projects, but seems like by the time i'll manage to get time and money put together to import a pair to EU, they'll cost an arm and a leg.
I'm really enjoying this series. Here in Blighty the Bedford van is as recognizable as old Transits - and for the same bad reasons!
This one's gonna be a doosey. I love it.
Videos are getting better and better, keep at up guys.
This in an awesome build! Square peg, round hole... no worries!🤘🏼😎
new follower here , great work awsome detail and sweet builds, so wanna see this build finished, UP THE BARRA :) keep up the great work guys
This is the better of the 2 shows now and I watch it first.
This is the work I'd love to be doing, even as a shitkicker. Hands on the tools, think of a problem, solve it. Cut,weld,brace,re-weld close enough for govt work. No management on your back apart from Barry who was getting his van back "when it's finished" thank you boys at the skid factory and your collaborations with the MCM boys, I can live vicariously through you 20 minutes at a time
we'll just mount the gearbox off the floor haha, hangmount it's what a van has in it just the look Al gives XD priceless
Speed boat engine in a tugboat? 😂
Entertaining as always!
More air time please.
Master of the understatement.
can i conclude that this is going to run off the newly released haltech plug and play for the barra? this is gonna be sick
Midnight where I am in the states. Still gonna watch
I like that first song- sounds like a Doom / A-Team mashup
I enjoy this show alot. After roadkill went behind a paywall, i am getting my mechanical wizardry fix from this show
I'm here in the states but found a Barra and hopefully can find a decent car but I'm going to try and fit one in a mustang 2000-2004 body style
Tadd Mason how the hell did you find yourself a barra? I live in California and I cant find them anywhere.
Check CoPart, everyone and their mother seems to be getting stuff from them these days, in some cases, cheaply too.
I cant wait for the next episode. I love this series 😁
Quality, utter quality ;-)
These boys deserve 1M subs at least!
love your work!! always a high attention to details so good!! you also are awesome on camera best car/build channel 👌🤘
Awesome dudes a bloody massive job for sure cant wait to see real progress :)
Like you said Al... it's still a giant train wreck in the shed 🤣🤣🤣👌 making progress 👏 great series!
Turbo Yoda!! you are a mechanical genius my friend
Can’t wait to see what you do with the Ford wiring loom “Stand alone wiring loom Alan”
Yoda is finally getting loose and comfortable. He’s hilarious. Not just grumpy it turns out.
Much Love from the States boys!
Marty and Moog better watch out for the New Old kids on the block. Skid Factory is too damn good.
Love it. Think this might be the thing to do to my gq patrol. 😁 and the people to do it. 😎. Great content keen it coming boy's!
HAHA that's a fat MR2!!! I am hoping to do something similar with an old VW van. I think my wife would love that as her daily :-D
Really been itching for this episode
Interior box...in the USA we call that the "dog house" seems like it should fit in with all the slang you Aussies like.
Wow. Loving this! About to do something similar with my mk1 Transit.
That's awesome. You can swap positions of psteering pump with alternator. Damn insist we had the barras in the us.
Sucking your will to live LOL party time excellent!!! but really guys no matter the challenge you show who's the BOSS can't wait for the next episode :).
Awesome series already guys, can't wait for the next eps 👍
Alan's beard changes from minute to minute, my immersion!
As Moog and martin would say, MAD!
no, don't die I love your builds... fight on, fight on.
True, love to build, how ever i hate how much they put on bin. I mean they just trowed after market, for looks of it working air conditioning system into bin. One of those would cost 500-1000€ even in that condition, in here and old engine, least they said they might sell it, but you can make it run with wood gas and run your emergency generator decades to come, as there is no fancy sensors to break, like in new shitty engines, that would maybe run 5-minutes until dying.
Same shit is happening in MCM main channel, where valuable parts are just trown away.. guess these guys have too much money.
Trying to sell used parts is hard.. unless it's a specialty part from a high-end car your not likely to sell it...
Swapping that 4.0L Barra into my Ford E-Series (E150) cargo van would have been so much easier...
Keep these great videos coming.
Phew! I was worried at the end of the last episode this would be a straight swap!
Damn this is a great project... the more and more I see you use your hoist the more I think... "I wonder if my landlord would notice if I put a hoist in the garage? "
Good shit. You get better with each episode Al. "Log manifolds don't work, caus this thing doesn't make any power" hahaha
Great show boys.
No power Steering..... I wonder what the steering ratio is? Could be some frantic wheel wrangling when the tyres break loose.
Rob Faith its a manual steering rack. an electric pump will not change the rack type.
You could put an electric column in out of a barina, we have done a Renault campervan here in New Zealand worked out mint.
Point here is, adding power steering wont make the ratio quicker. That thing probably has at least 4 turns clock to clock, so it's going to be bitch to handle when it breaks loose.
You'd need a rack with a quicker ratio to fix that, with or without power steering, it's going to be a lot better to drive during hectic moments.
Slow steering ratio might add a little to the fun on the drag strip, if the driver is enough of a wheel man thought.
Fair call you could also fit a steering quickner, just make sure it's not one that reverses direction too. I know someone who came unstuck with that in their race car 😂
Yes those moments where you are just better off going to have a lemon squash and a think about it, then come back tomorrow.
Im australian and didn't even know we kept peacocks as pets. Almost knocked me off my roo on the way to work.
Time to get a better strap for your roo! don't get ebay ones, use legitimate snake skin!
It's a companion peacock. Clearly 🤣
peacocks are for pussies i got me a drop bear
Huh. Thought Aussies kept unicorn headed Cassowaries.
I nearly choked on my soda :)))