Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
Thanks! Watch for more TJ videos coming in the future!
Thanks for the video! I like seeing TJ related content.
Haha did you snap the head off the bolt at 5:57?
Nice information ! My skid plate nut were spinning , I got a new set of 6 nutserts from ebay and i am good to go !
What abou a rubicon? Will the 241 TCase fit without a body lift?
What if you already have a BL and a 1" motor mount lift in your TJ? Can you just install the bell up pan as is at this point?
I'm sure you can
Can you just add a slip yoke eliminator and cv drive shaft instead of a motor mount spacer and body lift to fix the driveline angle?
You can do that option also if you wanted.
I already have a 1" MML on my tj, so will this skid work with it?
Why wouldn't you paint the frame before mounting? Rust is going to be a problem there.
You usually would. With the install video we were filming mostly the process. It is always a good idea to clean and paint any rust while you are down there 🤘
What if you've got a 1" body and lift the motor with 1" lift mounts? Are the blocks still required?
I would get guess not
or would i need to take to MML off and put your spacers in
And u dont clean all that rust and screw one side then another (not cross way - to be sure that is in same pos as older one)? Geez...
I have a slip yoke on my 97 tj 4" suspension and 3" body and my drive shaft vibrates. And advice or help with this.
Adjustable control arms
Sorry but you will need a body lift with that.
can i just do a slip yoke eliminator with a new cv drive shaft
You sure can.
will this work with 2 inch transfer case lowering blocks?
I would definitely not clean and paint my frame before I put my new skid plate back up too. Made me wanna puke living in rustsylvania.
Thanks! Watch for more TJ videos coming in the future!
Thanks for the video! I like seeing TJ related content.
Haha did you snap the head off the bolt at 5:57?
Nice information ! My skid plate nut were spinning , I got a new set of 6 nutserts from ebay and i am good to go !
What abou a rubicon? Will the 241 TCase fit without a body lift?
What if you already have a BL and a 1" motor mount lift in your TJ? Can you just install the bell up pan as is at this point?
I'm sure you can
Can you just add a slip yoke eliminator and cv drive shaft instead of a motor mount spacer and body lift to fix the driveline angle?
You can do that option also if you wanted.
I already have a 1" MML on my tj, so will this skid work with it?
Why wouldn't you paint the frame before mounting? Rust is going to be a problem there.
You usually would. With the install video we were filming mostly the process. It is always a good idea to clean and paint any rust while you are down there 🤘
What if you've got a 1" body and lift the motor with 1" lift mounts? Are the blocks still required?
I would get guess not
or would i need to take to MML off and put your spacers in
And u dont clean all that rust and screw one side then another (not cross way - to be sure that is in same pos as older one)? Geez...
I have a slip yoke on my 97 tj 4" suspension and 3" body and my drive shaft vibrates. And advice or help with this.
Adjustable control arms
Sorry but you will need a body lift with that.
can i just do a slip yoke eliminator with a new cv drive shaft
You sure can.
will this work with 2 inch transfer case lowering blocks?
I would definitely not clean and paint my frame before I put my new skid plate back up too. Made me wanna puke living in rustsylvania.