Exactly. Dont they need to be resetted as printer stores ink level memory so wont matter if we refill. It'll still read low ink level unless this one is different?
I would remove the cartridges from the printer and turn it off the printer. Unplug it from the wall for one minute. Re-connect the plug to the outlet, turn on the printer and re-install the cartridges. If this does not solve the problem, it's time for a new cartridge. Good luck.
@@right0ne1 Nope, as I was looking for one as black cartridge for my case is used often. I was planning to do this mod but it seems it's only for tricolor cartridge, so I might not be interested anymore.
Isn’t t possible to rip through the bag with this needle? I tried doing it but was afraid of going in too deep so the ink came out as I was squeezing it and made a mess 🤦🏻♀️
The bag extends to the bottom of the cartridge so inserting the needle 3/4 -1" is quite okay. Remember the hole is very small, and the ink enters the same hole which is also releasing the air. Therefore you have to very gently squeeze the bottle you are using to put in the ink, while the air is being released at the same time. When the ink starts to back up, the bag is almost full. The key word is " slow " or you will create a mess. Good luck.
get a digital camera tha uses the wider than tall format. Cell phone camera's are obnoxious to try to see a normal field of view. Also using an old discarded HP cartridge open it up to see where you can drill a 1/8" hole to refill. There are 1/8" rubber plugs available to replug the 1/8" refill hole. HP as of 2015 posted driver software online to allow non-HP ink cartridges to be used. However, now in 2019 that is no longer available. So its back to using refilled HPs with the HP chips on them. Thanks HP for nothing. You again MUST change out empty color cartridges to print in all black. Ripoff product. PS Epson ink works in HPs. For $25.00 you get 1/100 gram of pigment + 1 oz of water which is scandalous. That's $1,140,000.00 per lb. for the ink pigment . I can get moon rocks for 1/10th of that.
If you would like to throw your HP 6700 printer at the engineers head who built it press thumbs up!
how do you reset Ink Levels? if the orig carts have ink counters, no matter if it is full it will may still show that it is depleted??
Thanks Man! This was the easiest way!
Thank you. Going to try it.
Cool and how do you reset Ink Levels?
Exactly. Dont they need to be resetted as printer stores ink level memory so wont matter if we refill. It'll still read low ink level unless this one is different?
where do you get the bottles with the needles ?
From a refill kit. Try Dollar stores in your area...
My Printer still says the cartridge is empty even thought I have refilled it, please help.
I would remove the cartridges from the printer and turn it off the printer. Unplug it from the wall for one minute. Re-connect the plug to the outlet, turn on the printer and re-install the cartridges. If this does not solve the problem, it's time for a new cartridge. Good luck.
@@right0ne1 Thank you
as the ink refill is in the bottle, does the bottle suck back the ink between each press?
No.
@@right0ne1 why is that? a black cartridge would only have a single ink compartment...
That’s just how it works. Have you tried it?
@@right0ne1 Nope, as I was looking for one as black cartridge for my case is used often. I was planning to do this mod but it seems it's only for tricolor cartridge, so I might not be interested anymore.
@@ybrik5937 No problem. Thanks for your comments.
So glad you found it helpful 👍
Isn’t t possible to rip through the bag with this needle? I tried doing it but was afraid of going in too deep so the ink came out as I was squeezing it and made a mess 🤦🏻♀️
The bag extends to the bottom of the cartridge so inserting the needle 3/4 -1" is quite okay. Remember the hole is very small, and the ink enters the same hole which is also releasing the air. Therefore you have to very gently squeeze the bottle you are using to put in the ink, while the air is being released at the same time. When the ink starts to back up, the bag is almost full. The key word is " slow " or you will create a mess. Good luck.
ok bro. easy
does anyone try this method and worked with him ?
how many CC/ml shall we put it?
Capacity is about 12.5 ml.
@@right0ne1 is it? i thougt it's less then 5ml.. yes, thank you for the answer
get a digital camera tha uses the wider than tall format. Cell phone camera's are obnoxious to try to see a normal field of view. Also using an old discarded HP cartridge open it up to see where you can drill a 1/8" hole to refill.
There are 1/8" rubber plugs available to replug the 1/8" refill hole.
HP as of 2015 posted driver software online to allow non-HP ink cartridges to be used. However, now in 2019 that is no longer available.
So its back to using refilled HPs with the HP chips on them. Thanks HP for nothing.
You again MUST change out empty color cartridges to print in all black.
Ripoff product.
PS Epson ink works in HPs.
For $25.00 you get 1/100 gram of pigment + 1 oz of water which is scandalous.
That's $1,140,000.00 per lb. for the ink pigment .
I can get moon rocks for 1/10th of that.
Yeah screw hp. I'm trying to print in black but nooo I need cyan for that. Trying to figure out how to reset ink levels since I refilled them.
How do you reset that bitch printer so that it doesn't complain about original HP cartdriges?