Always best to avoid a teardown. Too many people take these apart to clean them when there is no need and you risk disturbing factory setting and tolerances. They will look just as good and likely operate better the way you did it. Nice job! Looks like new!
I see domestic machines labeled as industrial often as well , the reason is , most people dont realize we used to make things of of quality materials not plastic crap and they dont realize vintage machines were made to take a beating and this is why they made them so well , now with that said , any cast iron or aluminum singer made pre 70s could be considered industrial compared against any domestic machine made today , i dont get why you would go buy a new plastic sewing machine for hundreds, when you could buy a vintage for way less and have a way better machine , i own 9 machines now , most are singers but also have a 1951 Necchi BU i rescued from going to scrap , payed 0 for it and its one of my fovorite machines . There is only one problem with vintage machines .....once you buy oneyou want them all ...lol
Thank you Henry. I’m got interested in sewing machines last year to learn to sew with intentions to do leather work and upholstery work too . Thx for sharing your experience. ❤❤
For future reference, if you ever rehab another one, get some gojo Hand cleaner and a paint brush. Coat the whole thing and the dirt will melt right off. The just rub down and polish with carnuba and it will shine like new. Yours looks beautiful, just a tip to save you some effort next time.
I picked up one just like it the other day , lady was asking $30 I handed her 2 20s in a cherry Queen Anne table had to rewire a few things but it's just like that it's a 1950 Canadian model and it sews like crazy ! .53 amp motor, my gold is 98% I just sent her a video of it so I'm really fast and I don't know if she's too happy but I am.
Disassemble the tension wheel assembly. Inside the main shaft there should be a pin roughly 1/16" in diameter and less than an inch long. Without this pin the 2 discs will not open or close when you operate the foot.
The tension adjuster you mention does not open up- you may have put the spring on backwards. Google it and look at images for someone describing how to assemble this component. Also the ticking- after making sure everything is tightened up, check the timing. I can't quite think exactly how it's done, as I haven't had to do it, but there are a few videos on UA-cam about that, and you don't have to have the exact model to learn the process. If you still need help, post a detailed video and how she sews would tell you/us so we can comment and try to help. Thanks!!
Is it me or it doesn’t look like the same machine from the one that it was used paint thinner which definitely disolved the shellac and the last one that now has decals that weren’t there before? Or did I miss something and and it was repainted and new decals were installed? If you repaint what did you use because it looks amazing
Hi Mr. Johnson. That's nice work you did!!! I just had a Singer 66 with crinkle finish given to me. Mine needs all new wiring. I see yours doesn't have wires. Are you in the process of rewiring it? If so, it would be great to see a demonstration on that, or some tips. I live in Maryland as well. I love to fix things. I find repair shops to be very scarce, my opinion. I have found a really good one, Tedco Industries on Hollins Ferry Rd. (I think that's the spelling) I do a lot of sewing and upholstery, I get supplies there. They sell commercial machines and repair all. (I haven't had to do that, I do my own) thank you for your most helpful video. Maria
I run a new wire to my reo stat , it is is in series with the motor .. I run my light on a different circuit and some of them were like that anyway it took me about 20 minutes to rewire the whole thing and put another plug on it I even added an outlet under the table.
You did a great job. I’d like to see the final product with the cabinet. I’m not sure what you are asking about the upper tension dial, but I assume you took it apart already and then checked to see if the tension numbers correspond to the normal tension ranges. If the tension of the upper thread is not loosening with the presser foot lifter being raised, the central pin in the tension might be stuck with goo or grim. By disassembling the tension control, the center rod could be checked and cleaned, allowing it to release the upper tension when the presser foot is lifted. I’m not an expert, at all. I’m learning just like you. Good luck with a wonderful gift for your wife.
if you haven't figured out yet, the tension spring itself may need replacing. but being that it is a year later you probably found out the reason and fixed this bad gorgeous momma.
It looks good after that short cleaning. Did the paint thinner end up damaging the paint? I think many people use the term "Industrial" to define a machine that can handle heavy weight thread and sew leather goods and multiple layers of denim, and not a machine that can sew 24/7.
+Handmade With Love Hi, It sews very nicely, Ive used to sew Leather with no problems, it is for my wife, she only sews fabrics so she'll have no problems with this machine. I'll do a demonstration soon. Thanks!
if its anything like the old singer's I have it is an Industrial sewing machine to today's standards and they will run 24 hours a day if you oil then regularly and service or replace the motor,the 201 is a domestic singer but it was used in royal's royce's production lines sewing upholstery and that model is still in use through out Asia in sweat shops
I just watched this man do a tension spring replacement so maybe that's something that will help you. By now you've probably figured it out but, just passing it on. Thanks for showing how you do your great cleaning job. I have been a little timid to get into mine but, your video helped. Good video. Hope you got it going and your wife is enjoying it. ua-cam.com/video/y8QzddoGp6o/v-deo.html
Always best to avoid a teardown. Too many people take these apart to clean them when there is no need and you risk disturbing factory setting and tolerances. They will look just as good and likely operate better the way you did it. Nice job! Looks like new!
I see domestic machines labeled as industrial often as well , the reason is , most people dont realize we used to make things of of quality materials not plastic crap and they dont realize vintage machines were made to take a beating and this is why they made them so well , now with that said , any cast iron or aluminum singer made pre 70s could be considered industrial compared against any domestic machine made today , i dont get why you would go buy a new plastic sewing machine for hundreds, when you could buy a vintage for way less and have a way better machine , i own 9 machines now , most are singers but also have a 1951 Necchi BU i rescued from going to scrap , payed 0 for it and its one of my fovorite machines . There is only one problem with vintage machines .....once you buy oneyou want them all ...lol
Thank you Henry. I’m got interested in sewing machines last year to learn to sew with intentions to do leather work and upholstery work too . Thx for sharing your experience. ❤❤
For future reference, if you ever rehab another one, get some gojo Hand cleaner and a paint brush. Coat the whole thing and the dirt will melt right off. The just rub down and polish with carnuba and it will shine like new. Yours looks beautiful, just a tip to save you some effort next time.
non-pumice gojo, right?
I picked up one just like it the other day , lady was asking $30 I handed her 2 20s in a cherry Queen Anne table had to rewire a few things but it's just like that it's a 1950 Canadian model and it sews like crazy ! .53 amp motor, my gold is 98%
I just sent her a video of it so I'm really fast and I don't know if she's too happy but I am.
Great job! It cleaned up very nicely. Your wife will enjoy that.
Beautiful job! Your wife is a lucky lady!
Thanks!
This is only one of several machines I've done for her.
Andy Tube and Vintage Sewing Machine Garage have lots of great videos on restoring VSMs
Disassemble the tension wheel assembly. Inside the main shaft there should be a pin roughly 1/16" in diameter and less than an inch long. Without this pin the 2 discs will not open or close when you operate the foot.
Thank you !
I'm surprised paint thinner didn't mess with the paint and decals.
944gemma It was like watching a horror show.
Sharon Martin i agree
Paint Thinner is mild enough and didn't do any damage.
Yes, I had a bit of a shock when I heard paint thinner, but probably we are dealing with white spirit here.
@@budgiemom5320 That's going to be one less 66 in around a year
The tension adjuster you mention does not open up- you may have put the spring on backwards. Google it and look at images for someone describing how to assemble this component. Also the ticking- after making sure everything is tightened up, check the timing. I can't quite think exactly how it's done, as I haven't had to do it, but there are a few videos on UA-cam about that, and you don't have to have the exact model to learn the process. If you still need help, post a detailed video and how she sews would tell you/us so we can comment and try to help. Thanks!!
Thank you!
Is it me or it doesn’t look like the same machine from the one that it was used paint thinner which definitely disolved the shellac and the last one that now has decals that weren’t there before? Or did I miss something and and it was repainted and new decals were installed? If you repaint what did you use because it looks amazing
Thanks for sharing this video. I think I'm ready to take on my 66, 201, and 15 now.
Yeah! Go for it and enjoy your machine.
Hi Mr. Johnson. That's nice work you did!!! I just had a Singer 66 with crinkle finish given to me. Mine needs all new wiring. I see yours doesn't have wires. Are you in the process of rewiring it? If so, it would be great to see a demonstration on that, or some tips. I live in Maryland as well. I love to fix things. I find repair shops to be very scarce, my opinion. I have found a really good one, Tedco Industries on Hollins Ferry Rd. (I think that's the spelling) I do a lot of sewing and upholstery, I get supplies there. They sell commercial machines and repair all. (I haven't had to do that, I do my own) thank you for your most helpful video. Maria
I run a new wire to my reo stat , it is is in series with the motor .. I run my light on a different circuit and some of them were like that anyway it took me about 20 minutes to rewire the whole thing and put another plug on it I even added an outlet under the table.
Can you please show how to wind the bobbin in a Singer 66?
Wow it looks amazing! Thanks for sharing!
You did a great job. I’d like to see the final product with the cabinet. I’m not sure what you are asking about the upper tension dial, but I assume you took it apart already and then checked to see if the tension numbers correspond to the normal tension ranges. If the tension of the upper thread is not loosening with the presser foot lifter being raised, the central pin in the tension might be stuck with goo or grim. By disassembling the tension control, the center rod could be checked and cleaned, allowing it to release the upper tension when the presser foot is lifted. I’m not an expert, at all. I’m learning just like you. Good luck with a wonderful gift for your wife.
It’s a most beautiful I’ve seen!
Boy you knocked out of the park.
if you haven't figured out yet, the tension spring itself may need replacing. but being that it is a year later you probably found out the reason and fixed this bad gorgeous momma.
My understanding is the tension disc only open up when you raise the presser foot lever.
Great job thanks for sharing
It looks good after that short cleaning. Did the paint thinner end up damaging the paint? I think many people use the term "Industrial" to define a machine that can handle heavy weight thread and sew leather goods and multiple layers of denim, and not a machine that can sew 24/7.
The Pant Thinner did not damage the finish or the decals.
I agree with the rest of your comment.
Looks great.What did u polish it with?
Since you recorded this 2 years ago, which I just read, you must have solved your tension problem. What did you do to resolve the issue? Thank you.
May I ask what you used to polish after you cleaned it with paint thinner. Thank you.
Go jo hand cleaner. Coats of it
What did you polish it with?
Le falta luz al video no se aprecia la parte baja de la máquina
Nice work, and how she sew :D?
+Handmade With Love
Hi, It sews very nicely, Ive used to sew Leather with no problems, it is for my wife, she only sews fabrics so she'll have no problems with this machine.
I'll do a demonstration soon.
Thanks!
if its anything like the old singer's I have it is an Industrial sewing machine to today's standards and they will run 24 hours a day if you oil then regularly and service or replace the motor,the 201 is a domestic singer but it was used in royal's royce's production lines sewing upholstery and that model is still in use through out Asia in sweat shops
Cuál es ese líquido echarle limpiar la máquina
Керосин.
I just watched this man do a tension spring replacement so maybe that's something that will help you. By now you've probably figured it out but, just passing it on. Thanks for showing how you do your great cleaning job. I have been a little timid to get into mine but, your video helped. Good video. Hope you got it going and your wife is enjoying it.
ua-cam.com/video/y8QzddoGp6o/v-deo.html