The wing is 12mm thick in total and is made using two 6mm depron sheets stuck together and then stiffened with carbon spars. I shaped the leading and trailing edge very slightly and it flies very well indeed.
Am sorry there is no build video on RCGroups for this unit. The fuselage was formed using a sharp knife, a rasp, a file and some sand paper it did not take long with the material only being soft foam. The electronics bays were cut in exactly the sae fashion but also using a dremel type tool as well. As you see that delta wing shape flies very well indeed and is sturdy too a worthwhile project and I still fly this model regularly after all this time.
batt weight is 370g , i have this electronic on my zagi 1200mm and this going realy good, i will make this plane like your , but i will se will i put on him motor 2200kv an batt 2.2 3s this also going good , when i made it i will send you link here :))
I like this viper you put together. Can you give me some dimensions as I have already "copy catted " your kopy kat? As always with a few mods but that does not take away from your great build. Also can you give me a wieght full up with all gear onboard? Thanks much.
Very nice - love to start making models in Depron - I make the mini Kangaroo - check it out on salem42salem42 in utube for all vids . My best is the Vulcan and Kyten ..
i been building f22 out of coroplast for a wail now, and they fly very good with my himax 1220 kv and a 10by 6 prop. i hope it will be no problem
The wing is 12mm thick in total and is made using two 6mm depron sheets stuck together and then stiffened with carbon spars. I shaped the leading and trailing edge very slightly and it flies very well indeed.
its looks a very easy build im goina try with coroplast and foam
Thx for sharing.
Am sorry there is no build video on RCGroups for this unit. The fuselage was formed using a sharp knife, a rasp, a file and some sand paper it did not take long with the material only being soft foam. The electronics bays were cut in exactly the sae fashion but also using a dremel type tool as well. As you see that delta wing shape flies very well indeed and is sturdy too a worthwhile project and I still fly this model regularly after all this time.
Impressive!
Thankyou Sir!
me gusta este avión pero creo que deverías explicar algo mas el proceso de fabricación
saludos
but i meant to say.. great looking craft..!!
Sorry for the late reply it was such a long itme ago now I really dont remember.
I built a 2x bigger version; flys very nice.
batt weight is 370g , i have this electronic on my zagi 1200mm and this going realy good, i will make this plane like your , but i will se will i put on him motor 2200kv an batt 2.2 3s this also going good , when i made it i will send you link here :))
A espuma colorida usada na fuselagem a faz parecer que é de madeira, mas não é. Nos outros videos do BillHally, vemos que o avião voa muito bem.
I like this viper you put together. Can you give me some dimensions as I have already "copy catted " your kopy kat? As always with a few mods but that does not take away from your great build. Also can you give me a wieght full up with all gear onboard? Thanks much.
es muy bonito el rc me gustaría hacerme uno donde puedo bajarme los planos del avión??
y parece también muy rápido... felicidades por tu trabajo
hi what thickness foam did you use for this thing? do you just simply shape the wings leading edge or did you have to do both front and rear? thanks!
would you please tell me what are the electronic components we require to make this plane .........thank you .
Well done!! Do you have the plans you could share with us all?
Shane Smethwick Sorry no plans it was just built based on a friends airframe.
do you have plans for this ? I would love to try to build this.
What's this music in the video? I've heard it before, but I can't remenber :( Thanks!
nice
which electronic did you use
What esc, battery and motor did you use???
How much did it cost you to build this plane?
how did u shape the fuselage/canopy
could i have the plans for this plane i have always wanted to build a plane like this
i have edf 64mm trust is 1100g , battery 3000mah 4s , will it fly?
whah did you make it out of
did it fly?
Ok, but what is the former melody? :)
esse com certeza não vôoa por causa da madeira pesada!
ten people are kopy-kats
Hola.sabe alguien como conseguir los planos de este avion...???
Jose Pacheco Portugues Arrependido não tenho nenhum plano deste modelo como foi construído da minha cabeça.
***** Can you give me the dimensions?
Very nice - love to start making models in Depron - I make the mini Kangaroo - check it out on salem42salem42 in utube for all vids . My best is the Vulcan and Kyten ..