Wow. That sounds really good! I might end up doing the same one day.
i j bought the gk61 and milky yellows. i bought some lube and film!! tysm for this tutorial, will be using!
Good stuff, love your channel, I'm about to do a video just like this rebuilding my GMMK pro with Milky Yellow Pros and foaming/filming everything, and of course, new KEYCAPS =]
Wonderful video, thank you! I came for the yellow pro insights, stayed for the nice vibes B)
Take a note that kelowna 205G0 is a non factory mix. Original factory kelowna 205G0 is marked as 205GD0. It's kinda important since mixes are supposed to be less reliable
There is no such thing as original factory Kelowna 205g0 or 205gD0, Kelowna creates nothing. They sell repackaged Krytox directly from Stephen Miller.
I noticed that you know how to touch type. I learned how to do it a long time ago too!!!!!
I try to first time lube switch 61ea. Start about 9am and finish 11pm 😂
Initially, I though you would not be a Vietnamese until I saw the subtitles lol. The subs are very straight away for Vietnamese =))
Please give me link buy of the lube station.
Your videos look great, informative and cozy! Keep it up!
P/s: mình cũng mới full mod 1 kit akko 5108s rgb, thật sự là time-consuming and back-broken =)) được cái là rất đầm và thocky, so satisfied :D
Cảm ơn bác ủng hộ nhé 😍 Lube station trước mình mua của 1 bác đăng bán trên FB giờ không nhớ ở đâu nữa. bác lên shopee tìm thử từ khóa Lube station xem nhé
those nails tho ✨Shining Shimmering Splendid✨
nice video chị ơi, mỗi tội lúc thu mấy cái sound nó hơi bị nhỏ ấy ạ, còn lại là tuyệt vời hết nha chị!!!
cám ơn e nhe 🥰 c cũng trầm cảm vì cái mic, nó thu tiếng ồn background lớn quá so với âm gõ phím. đang chờ mic mới cho xịn hơn mà tắc biên 🥲
Chào bạn, phiền bạn cho mình hỏi chút ạ! Switch Gateron Milky Yellow Pro này nó có pre-lube sẵn 1 lớp mỏng phải k ạ? Bạn lube đè lên luôn hay là đã vệ sinh từ trước rồi nhỉ?
I love your videos, why it's no need to lube the top housing?
because most of the contact points inside the switch are between stem and bottom housing
@@kittykatmechkey thanks, im currently using akko lavender and I want to try that gat milky yellow pro . Is it thocky or the smd pro are more deep sound?
hello, may i get some recommendations on the thickness of the switch film for those switches? i just realize how wobbly they are. as always, your videos are very helpful!
Chị nghĩ con này vs matcha ice, con nào ngon hơn?
Hi, may I know why did you get the milky Pro instead of the regular Pro switches?
Bạn lube con này có cần vệ sinh lại dầu lube từ nhà máy không, và nên vệ sinh switch như nào thế ạ?
Could i ask about the key switch film? I look at the comments that you recommend the 0.3 one, but I can't find htv 0.3 anywhere only eva 0.3
@@jacktkiller6104 thank you! don't need to use only htv. You could find 0,3mm film made of other materials, such as eva, poron, pc,.... just get whatever looks good to you.
awesome video! may I ask what camera + lens did you use to record this video? thanks!
Quick question since the pro comes factory lubed, did you apply the lube over the factory lube? Thanks!
with pre-lubed switches, you should clean it before lubing the new lubricant
@@kittykatmechkey can you give me some tips on how to clean them effectively? or should i just apply the lube over the factory lube? does it makes a huge difference?
@@carlvienkwok6484 you can use water with baking soda or washing-up liquid
i just lubed on top, it makes literally very little difference because factory lube is very thin
Hi, did you remove the factory lubing from the milky yellows before manually lubing them? Even if you didn't would you recommend doing so?
if you asked me 2 years ago, i would tell you to remove factory lube and re-lube them. But now you shouldn't. It will take you so much time and effort. Just use them with factory lube or buy other switches. Nowaday, there are so many smooth stock switches in the market (such as switches from HMX, Bsun,...)
chị ơi, em lỡ lube nhưng không ưng thì em làm thế nào để loại mỡ đã lube trên switch để lube lại ạ?
e tháo ra rồi rửa bằng nước rửa chén ấy, nếu có bột baking soda thì pha thêm vào. Rồi để thật khô nới lube lại nhé
@@kittykatmechkey rửa bằng cồn 90 dc k ạ và có cần tháo miếng đồng ra k ạ?
does this lube get dry? how much time I will lube them again?
yes, it depends on how much you type on your keyboard each day. I think we can re-lube the switches after 1 year
i think that if u put another keycaps and not pudding the sound experience could be even better, i tried it out on my keyboards
lube cái stem pole hay bị tịt âm lắm, với mấy con âm đanh, mình lube pole xong sau âm nó bị k còn như trước
How is the stem wobble after filing?
filming mainly reduce housing wobble, and just a little bit stem wobble
where did you get stock switches though... When i went to your links, ther were already factory lubed :((
Did you unlube the prelube on the switches before re-lubing them?
@@kittykatmechkey hi , how did you clean the pre-lube off the gateron pro milky yellows?
I heard that gateron milky yellows come pre-lubed, is it okay to lube it again? (considering lubing mine)
in my opinion the switches lubed by you are better than pre-lubed ones.
@@kittykatmechkey thanks for your reply! I see... then I will do it. Do you clean the factory lube or just proceed on lubing like usual?
@@Sebastiancornelius37 At first I added the new lube on the factory lube, but then I realized that it's not really smooth. So I decided to clean all the factory lubricants and continued lubing myself. Hope you have fun with it!
@@kittykatmechkey any easy way to clean off the factory lube? This sounds quite difficult
cho mình hỏi chút,switch gat yellow milky pro này thuộc loại silent đúng k bạn? với lại nếu so với red sw thì độ lớn âm thanh và tiếng cho ra nó khác nhau nhiều k bạn?
nó là dạng linear âm trầm chứ ko phải silent b. Nếu so với red thì mình thấy loại này âm và cảm giác gõ đều hơn hẳn
Mình hỏi hơi nhạy cảm, bạn có bán những bộ bàn phím bạn tự làm ko ạ
@@kittykatmechkey tiếc nhỉ, nếu bạn ko phiền có thể chỉ giúp mình, cách làm bàn phím cơ, nhưng gõ êm, ko ồn được ko ( vì mình đang phải trọ chung với bạn ).
mình mới chỉ biết phải lube phím, dùng red switch, lót foam bàn phím, ngoài ra chưa biết gì hơn.
và mức giá tối thiểu thì khoảng bao nhiêu ạ, hiện tại mình đang để dư 2tr để mua bàn phím cơ.
@@liquidnavi3694 trước mình dùng red switch gắn thêm o-ring cũng êm lắm nhưng đến đêm khuya thì vẫn nghe rõ. Tốt nhất nên mua bàn phím dạng hotswap red sw thử trước xem sao nếu ok rồi thì thôi. Nếu cần thì có thể thay switch dạng silent như outemu silent. Còn muốn dòng cao cấp hơn nữa là alpaca silent (mình đang dùng loại này)
@@kittykatmechkey okie, tks kiu bạn, mình cảm ơn nhìu. Mà bàn phím bạn dùng có phải lube ko ạ ?
Quick question, what kind of thickness of the film should I use for these switches?
mình dùng loại 0,15 nhưng cảm giác chưa đủ chặt, chắc dùng lên 0,3 mới đủ vì con này khe giữa 2 housing rộng lắm
did you tap mod??
sorry I thought you commented on my another video with my another stock keyboard ^^ For this Gamakay K87 keyboard on this video, I did tape mod on it with 2 layers of masking tape.
the difference is toooo small to spend so much time to lubing and etc.
the difference is not only in the sound, but also the typing feel. you can feel and hear the difference obviously in real life
a donde vas jajasjajaja si hombre
Nope real taste goes away w/ film
Có pre-lube khi mua. Thì có cần rửa/lau chùi cái pre-lube đó rồi làm theo video không ạ?
Nếu có rửa/lau chùi thì dùng gì để thực hiện ạ?
nên làm sạch lớp pre-lube thỉ tốt hơn e nhé. Chị dùng nước rửa chén pha loãng và cho 1 ít baking soda nữa
@@kittykatmechkey dạ e cảm ơn ạ. Lần đầu mò mò dẫn thân vào con đường custom =)))
@@kittykatmechkey à chị ơi. Cho e hỏi như con Fl MK750 stab stock ngon rồi, có thể e về lube thêm...
Nhưng mấy cái switch dưới mấy con stab nên mua loại gì cho nó ổn nhất nhỉ? Vì ít nút nên cho ngân sách quang 10k/1 switch dưới mấy con stab.
Mấy phím bình thường thì choi Gateron Milky Yellow Pro ạ.
those switches are pretty!! ✨ keep up the great work!
thank you!!! ♡ ♥