You've done a great job! Thanks! I am going to change the grille to a raptor one with FORD letters and ambient lights on the top. Your video is very helpful. Thank you!
Thankyou! My wife hit a boulder and caved in the lower bumper cover - rubber. You (indirectly) showed me how to get at it. I just pulled a few bolts along the fender well to get behind it, then hit with my heat gun and reverse folded it with my hand. Voila. I have no idea how much $$ you saved me but you probably do.
Great video!!! Thank you for this. I needed to replace my windshield fluid reservoir and this shows me how to get to it with perfect instructions. Saved me $250 and a massive headache.
Lol I want to di the same to my SE trim nut man this looks rough. I wonder if you have to do any modifications for fog lights on the SE trim. I would assume it doesn't have the space for the light built in already if it's and SE trim.
Great job. I'm looking to replace the fog light bulb in my ford edge. It looks to be the same as yours with the chrome surround and the halogen light. Any recommendations as to how best to access it?
A lot of work, good job. I have a 2015 edge. The outside ambient air temperature sensor ( Motorcraft # DY1160) is acting up. It reads sometimes. The sensor is on the passenger side behind that grill you just changed. I took the bottom panel off, but it didn't let me access that area. I have extended the warranty. I will call tomorrow to see if that is covered. If it's not covered, I will work on it. I will check behind the wheel well cover on the passenger side first! Thanks for your helpful video
Great video, my mom hit a deer and I plan on taking the bumper off and using a fiberglass repair kit to get the cracks back into form on the inside of the bumper and then using a paint marker to re paint the parts where the deer scratched the bumper and it would be a 30$ repair instead of the 800$ repair.
@@StangsGarage I have a 2019 Edge Titanium with the lower bumper cover cracked possibly by snow drifts. Can I remove/replace this part KT4Z-17D957-AA without removing the entire bumper cover?
Do you know a way of changing the fog light housings? I removed the wheel well and "skid plate" lol, I guess, but still want able to access the housings. Any suggestions with having to remove the grill?
Great video! I'm looking to just change the grill out on my 18 edge. It looks like you were pulling on the grill and it was going to come out. Do I need to pull the whole bumper off just to get the grill out or is it just clips after the top screws are removed?
Hi, I’m pretty sure to replace the grill you will need to remove the whole bumper cover as there are a number of clips at the bottom you need to separate.
stevenrrobinson3680 that’s whole thing took me a couple of hours. I’m experienced on Fords but if you are going to do it I suggest you have a 2nd person when it comes to removing the bumper from the body so not to scratch it accidentally
StangsNStripes oh okay I thought it only had the lead rim around the fog lights and not like a standard hole for a fog like yours does? Are you lights on the outer part HID and I assume the inner bulbs are stock halogen?
@@StangsGarage fog light are not available on north american market, you need to order the Europe bumper cover and then you could change the fog light housing to add fog
@@Harvdawg1981 you could probably order some from the UK and ship over. I’ve had to purchase various parts from the States in the past. Funniest one was when I brought a tire while on holiday and took it home as part of my luggage (couldn’t get that brand in UK) Misses wasn’t impressed and airport staff thought I was mental lol.
You've done a great job! Thanks! I am going to change the grille to a raptor one with FORD letters and ambient lights on the top. Your video is very helpful. Thank you!
Thankyou! My wife hit a boulder and caved in the lower bumper cover - rubber. You (indirectly) showed me how to get at it. I just pulled a few bolts along the fender well to get behind it, then hit with my heat gun and reverse folded it with my hand. Voila. I have no idea how much $$ you saved me but you probably do.
Holy hell! I didn’t think it was gonna be this much work to replace the bottom grill lol. Wish me luck!
@@michaelhiggins9791 good luck. Yeah it's a bit of a long winded job 😂
Great video!!! Thank you for this. I needed to replace my windshield fluid reservoir and this shows me how to get to it with perfect instructions. Saved me $250 and a massive headache.
Fantastic video. Showing each step. I’m actually just trying to find the way to change the emblem , but thanks for the insight , it’s great
Thank you for the detailed step by step. Nice work!
I was planning to swap my grill and add fog lights, but Sweet Jesus, not now. That is major surgery. Thanks for showing is.
Mate, not worries but seriously it’s not that bad to do. It’s like playing with Lego.
Lol I want to di the same to my SE trim nut man this looks rough. I wonder if you have to do any modifications for fog lights on the SE trim. I would assume it doesn't have the space for the light built in already if it's and SE trim.
Great job. I'm looking to replace the fog light bulb in my ford edge. It looks to be the same as yours with the chrome surround and the halogen light. Any recommendations as to how best to access it?
A lot of work, good job. I have a 2015 edge. The outside ambient air temperature sensor ( Motorcraft # DY1160) is acting up. It reads sometimes. The sensor is on the passenger side behind that grill you just changed. I took the bottom panel off, but it didn't let me access that area.
I have extended the warranty. I will call tomorrow to see if that is covered. If it's not covered, I will work on it. I will check behind the wheel well cover on the passenger side first! Thanks for your helpful video
SCS I would have thought something like that would be covered under warranty.
Great video, my mom hit a deer and I plan on taking the bumper off and using a fiberglass repair kit to get the cracks back into form on the inside of the bumper and then using a paint marker to re paint the parts where the deer scratched the bumper and it would be a 30$ repair instead of the 800$ repair.
Awesome!
@@StangsGarage I have a 2019 Edge Titanium with the lower bumper cover cracked possibly by snow drifts. Can I remove/replace this part KT4Z-17D957-AA without removing the entire bumper cover?
Do you know a way of changing the fog light housings? I removed the wheel well and "skid plate" lol, I guess, but still want able to access the housings. Any suggestions with having to remove the grill?
Great video thanks for sharing. Do you have any idea where the horn is located on a UK 2016 Edge?
Very informative. Thank you.
How much to buy these grille? I have to replace mine due to a rock chip.
What do you call the bumper that you have with the scoop I would love to get one for mine
Great video! I'm looking to just change the grill out on my 18 edge. It looks like you were pulling on the grill and it was going to come out. Do I need to pull the whole bumper off just to get the grill out or is it just clips after the top screws are removed?
Hi, I’m pretty sure to replace the grill you will need to remove the whole bumper cover as there are a number of clips at the bottom you need to separate.
Bro thx for the step by step video it would have been tough without you
Ray Davis ur welcome, glad it helped
What name of the piece u use on the head light u tighten up call
Where did you get the dog lights from
Did you get the LIP SPILLER after you bought the car. In the front.
spoiler . Sry
All factory standard on a Sport/ST
Hi there! I have a question did your car came with the fog lights? Or is it aftermarket?
Please can you do a video on how to install the fog lights!! Please
Thanks for the video. How much time did it take you to do this?
stevenrrobinson3680 that’s whole thing took me a couple of hours. I’m experienced on Fords but if you are going to do it I suggest you have a 2nd person when it comes to removing the bumper from the body so not to scratch it accidentally
Thanks good video work
Thank you
are those standard fogs with the led rim or aftermarket?
Sharad Mani hello buddy, yeah everything is standard spec, no LED. No aftermarket equipment
Sharad Mani hello buddy, yeah everything is standard spec, no LED. No aftermarket equipment
StangsNStripes oh okay I thought it only had the lead rim around the fog lights and not like a standard hole for a fog like yours does? Are you lights on the outer part HID and I assume the inner bulbs are stock halogen?
Sharad Mani I think the LED around the fog lights might be a US spec. Mine has a chrome trim around the fog lights. Bulbs are halogen
@@StangsGarage fog light are not available on north american market, you need to order the Europe bumper cover and then you could change the fog light housing to add fog
Where is the horn??
Nice 👍
And this is the oonnlllyy way to access the grill section?
Yeah, it’s all clicked in to the tabs on the bumper.
Where did you get the fog lights from?
Hi, They are a standard manufacture part.
@@StangsGarage that sucks cause here in the usa they did not include fog lights for ours. I got a 15 SEL with just the drl
@@Harvdawg1981 you could probably order some from the UK and ship over. I’ve had to purchase various parts from the States in the past. Funniest one was when I brought a tire while on holiday and took it home as part of my luggage (couldn’t get that brand in UK) Misses wasn’t impressed and airport staff thought I was mental lol.
@@Harvdawg1981 I think you have to get your bumper modified to put those on if in America.
Who the heck is that one person that downvoted this? What were you expecting, a Honda??
What lower grille lip is this?
Hey, if your talking about the bumper lip, it’s the standard lip that comes on the Sport/ST model
Stangs Garage yea I have the standard 2019 escape.
@@mattthemechanicnice, we call the Escape a Kuga in the UK. They have a different ST bumper with a different lip.
Stangs Garage so what you’re saying is you can get me some parts haha
oh hell no...way too much work. i'd just take it to a shop and watch them do it
Это роловину машины нужно разобрать
fog lamp? I want those on mine
I got these dumb led things