DIY | Angle Grinder Cutting Jig | Straight Cut Sheet Metal
Вставка
- Опубліковано 23 лют 2019
- The easiest way to straight cut metal sheet. In this video You'll see how to build a straight cutting angle grinder jig. I have been trying to do it in the simplest and easiest way, using minimum of elements. To make this usefull product You'll need: 3 screws, 2 nuts and about 25x15cm metal plate. If You'll have any questions - You know what to do. Have fun!
- Навчання та стиль
I had a lot of old pipes and rebar to cut up and from what I read ua-cam.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
i'm so impressed with this idea and i'm going to make one.
Thanks for the simple and practical idea to cut along a straight line with an angle grinder.
You have used a threaded rod and two nuts to raise and lower the grinder. Though it works, when you raise and lower the grinder, it moves left and right of the straight line. Even though this movement is very small, you can use a plain rod and two low-cost ball bearings and improve the accuracy.
Looking forward to watching the video of the improved version.
Definitely looks easy enough to make, and without much time consumed. Thanks for sharing! Aloha
Thx. Aloha!
Awesome idea! I might try this at some point. Cutting metal with my old grandpa's hacksaw isn't as fun as it used to be. ;.)
Am so much amazed for all the stuff youve been shared thank you so much .
Thank You very much, It is very kind of You.
This is brilliant. Thank you 🙏
⭐⭐⭐⭐⭐
Most brilliant hacking ang grinder i ever see..
a simple and genious idea.
Very simple!simplicity makes man perfect.
Thx
Wow! Thanks for showing how to make this.
Excelente muy bueno espectacular.
Saludos muy grande para todos desde Tigre Bs.As 👋😎
NICE! THANK YOU FOR YOUR EFFORT!
No problem. Thx,
Much needed idea for my DIY projects
great idea and easy to build, thanks ill try this
Brilhante, parabéns 👊
Great jig fella!, and just what I was looking for. Well done and a nice piece of video work to boot! Thank you.
Thx. I try my best !
That is what I call simple and yet very efficient. It is exactly what I was looking for. Thanks for sharing...
Thx
ua-cam.com/video/BHep_9ZdBmo/v-deo.html
Muy buena la idea gracias
simplej, thanks for you
Awesome idea!
Ecxelente idea, felicitaciones !!!!!!
Thank's that's going to be my next project 👍
Very nice bro!!
I’m in my way to my shop to make one.
Thank you.
Awesome idea man definitely gonna have to make one
what a beautiful, simple and very efficient project. Congratulations my friend!
Thx
Very usefull tool sir thanks for sharing 💖👍👍👍👌👌👍👍
Simple, easy, effective. Perfect idea 👌
Thank you its amazing Im going to do it
Simple design but very nice!
Thx Tom.
The best idea!
Thank you for sharing your very good idea excillent
brilliant!
Nice job.
Muito legal
SUPER!!!
Gracias por compartir tus conocimientos e invenciones, yo le agregaria un tope de profundidad.
This is really good, and I have a similar Bosch grinder so I may just steal your idea haha.. thanks
Go ahead, have fun. 😁
I like that!
Great invention. Shame I don’t have a welder though ☹️
Nice idea tks
Good job 👍
This you made is so far my favorite, but I don’t need to observe all the mundane tasks of cutting, welding (the full length), grinding and especially painting! Appreciate the fast play back speed because I can 2.0 that to get to the final build and use of it. Thanks for the brainstorming idea.
Cool !!
Genius
Brilliant
Good idea! I would add a thin sheet of plastic to the bottom to reduce friction and make it glide across the work piece easier.
Yes, its good idea. You may use a wax for it as well.
Super work I like
Looks amzing
Welldone 💕👍💕
Nice idea
Great... Please share the measurements that you have used... Thank you
nice video where did you get blade at looks pretty good will make one for shop thanx
Put some tinny roller at the backside of the plate for smooth gliding. You can use roller from salvage printer. My idea came out as i see you pushing with lot of friction.
Good idea.. nice n unique jig
Ah! come on, that takes all the fun out of trying to get a straight cut.
All the sussing and swearing that goes with the job. :-))
really nice job
Thank You barry8082.
You could put a spring under the unit so it will push back up
Superrrrrrr and thanks.
Moving it up and down drives the grinder left and right because pivot is threaded.
Did I miss you shaving threads off ?
The real way to cut straight is practice, carefully score the line you wanna cut making a sligth channel, next cut all the way through and follow the channel without rotating the angle grinder, if the channel is hard to follow then try and cut in a bit deeper
That’s cool😘😎👌
thx
Very Good Project Brother.
You use spring under v shape for depth adjustment.
Thank You Mohd Rehan for Your comment. It is good idea.
Your kinda skills, you don't need this tool. Very useful for novices
Thanks😜
Very nice...🙏
Thx
Good! I Will make it other mod
Excelente,
muito obrigado.
You teach how to do this JIG for persons like me. lol
I can' cut straight with grinders or hand saw.
hi there can you fabriacte undercut frame for cutting skirtingboard while its fixed to wall so you can slide wood floor under without taking skirting board off :)
Im wondering if you can keep the cutting disc parallel to the guiding edge (the outer edge) of the jig? As I can see, there is no such thing to stop the grinder from pivoting around two connecting bolts.
true, theres only a single bolt to stop that motion, i tried making one but the disc is not exactly parallel to the outer edge.
You can use oil to the thread
Suuper...nice video.. keep it up bro
Thx man😜
i've seen a bunch of these , and by far this looks like it will work the best, when they try to make them too complex, is where it leaves room for error, very simple design, straight ,square , plunge saw, 1 and done,, send this to bosch, tell them this is how they should have made their CS10 saw
Thx
By by
Wow, great work! I wonder what equipment you use for welding the jig.
mig🙄🙄🙄
@@ricksuarez9653 huh? I'll run right out and buy one... 😏🙄
MAGNUM MIG 200 ALUMINIUM SYNERGIA
😱❤❤❤
Which cutting blades are you using.
How about doing one for 45 miter cuts! Great video btw. Genius!
Gizzly Industries sells a jib that does this
This is awesome! What is that spray paint you use?
It is e primer.
About to make this, how did you make sure the cutting wheel was parallel with the plate?
ua-cam.com/video/BHep_9ZdBmo/v-deo.html
Threads = lateral translation during plunge.
DUDE!!!, WTF???, judging from your first cut , why do you even need a shoe, that was awesome, i work with a guy who can make cuts like that, it's like the grinder is just attached to the end of his arm, i'm jealous, i think the trick is ; know where you want the cut , and just commit to it
Can you make a cutting jig for an angle grinder which can cut at 45 degree angle?
Will u please tell me that witch welding machine and Holder u r using, i saw it first time
I am using Magnum MIG 208 ALU Aluminium synergia 200 standard setup.
👍😀
Hola buenas tardes amigo maestro exelente herramienta echo en casa que Dios te llene de bendiciones y mande mas videos me gustaria que me diga las medidas la placha de acero espesor, la solera y tornillo se lo agradeceré saludos gracias y cuidese asta lugo amigo desde México Cuernavaca Morelos
Hola buenas tardes mi amigo mucho gusto la hoja es de 4mm gracias por tu comentario realmente aprecio esto
How do you edit the videos, lets say I record on my go pro, to put them together to make a video like this, I started woodworking and recording now I want to edit the videos
ua-cam.com/video/BHep_9ZdBmo/v-deo.html
What is the welding type call?
I made this at home
good video, friend of how much is the thickness of the sheet?
4 mm. Thank You.
There is an attachment for grinders exactly like this in my country, selling for less than US$2
Anas Suhaimi not all two things are made the same
@@danielmiller6405 huh?🙄🤔
So, how do we find that?
👍👍👍👍👍👍✌️✌️✌️✌️
Love the ingenuity. The hilarious, ironic part of this project is the freehand cut of the base plate. As this has to be dead on square and the dude can easily cut it freehand, logic would dictate he'd never need the guide he built. If you don't possess that level of skill (like me), perhaps have a machine shop cut a perfect rectangle to start with.
Looks like someone else who has yet to discover the bliss of using a Diablo Cermet metal cutting saw blade. It will change your life and no Im not affiliated in any way.
How many millimeter the depth cutting
great, what is the name of that welding machine that you use? would be grateful to know
Magnum MIG 208 Alu Synergia
ua-cam.com/video/BHep_9ZdBmo/v-deo.html
Hi,
Great idea in bringing out this video,
I find two suggestions
1. A support should be there in the front to hold the fixture or
2. The length of the bottom guide, support what ever you call should be increased at least double the existing length.
Reason: other wise the pressure while in action may topple or run out of control from your hand
Moral: Great but little change is apriciated
ua-cam.com/video/BHep_9ZdBmo/v-deo.html
Recently bought an angle grinder. I'd like to build something very similar to this but I don't have a welder. Has anyone built one without using a welder and if so, how?. TIA
You could try brazing it, just need a decent propane torch and some rod compatible with the metal you're using. It should hold well since it's not a lot of force.
Thenkku
nice vidro can you tell mre what's the title of the music? thanks :)
InspiringUpbeat
We could achieve the same result by installing a cutting disc in a circular saw!!
My cuts are bad with squere tube profiles. There are not a single tutorial about prciese cut squere tubing.