I remove a lot of stickers. Use a razorblade insert on it's own and pry up the sticker. Use the blade to support the sticker as you pull it up with your fingers.
Glad to know I’m not the only one to put the tapestry sticker on upside down. That’s what happens when I try to jump ahead and do the stickers without looking at the instructions.
You can use the sticker sheet itself (the smooth paper) to peel off the sticker and then re-apply it in the correct orientation. You can try it on simpler stickers first - just take the sheet and try to shove it underneath the sticker. You'll see that you manage to get the sheet underneath the sticker, and then you can grab it with one finger on top of the sticker, and the other one under the sheet.
I have found this useful too. However, in this case, I would leave it. I purposely did mine like this so I could use it with the bar at the top for MOC purposes.
Certainly, the set appears stunning, and as demonstrated in the video, the price per piece is quite reasonable. Stay tuned for more videos, as I'm preparing a little surprise in the near future.
I like the video. But the sticker saying "beware" is not about any of the dragon knights. But it is about the fright Knights specifically showing Basil the Batlord on his dragon (referencing an old set small set where he came with his dragon and a scepter with a bat on it) ... this is further drawn upon by the bat hanging in the tower.
I like to set the Medieval Blacksmith outside the village in the forest so it's with the Forestmen. Fits better that way. This way it can be part of the same world and be special in its own way.
I've set up a small display featuring the medieval town square, the Viking village, and the Hocus Pocus set, all of which exude medieval vibes. However, I've noticed they don't complement each other well. My issue is that the Hocus Pocus set is on a larger scale compared to the other two. I think this might be similar to what's happening with your Blacksmith set.
Yes. Get a utility knife (as you would use to cut cardboard from a hardware store say) and carefully slide the sharp blade under the corner. You'll be able to pry off the sticker fairly easily. I've done this many times, for second hand lego or lego where the replacement sticker sheet is only available internationally. Say about 80% of them are perfect and there's no noticable defect. Be careful though, as there's a non zero chance you would upset the glue and have a corner that comes up, which is fixed by more glue :) I've never actually cut the sticker at all via this method.
I finished this set the other night. My only complaint was when they have you put little decorations in the room after the walls are finished. My fat fingers had the hardest time with some of those lol.
I was looking forward to the day you made this video! I personally love this set very much. Definitely agree about it's flaws but they are small and easily made up by all the charm in the set. It's a perfect companion to my Lion Knights' Castle. I truly hope we get more sets showcasing the life of the villagers. In regards to the upside down sticker, you can make the most of it by setting up a spot to hang it in any of your personal castle sets because if you hang it from a high up place like the banners in Hogwart's main hall, it'll look like it's the right side up!
The flaws are indeed minor, and overall, it's a fantastic set. My only wish is that there were more minifigures, as the town square should be bustling with life; currently, it feels a bit empty. I was also considering hanging up the sticker somewhere so it would face the correct direction. Thank you for your help
I also reversed the sticker I was able to carefully slide a fingernail under the edge and take it off when I put it on the right way it worked out and there’s no indication that it had been messed up at all
Awesome way - thanks for sharing and we’d definitely love to feature this one! We also love the Snow White Castle!! 😊 thanks for a great video we’ve been watching your videos this morning! we will be back to watch more!
Určitě bych si přál, aby tam byl kuchař, jelikož máme jedno patro vyhrazené pouze pro kuchyni, ale nikdo v ní není. Pak možná nějací lidé popíjející pivo o patro níže. A jelikož se jedná o středověké náměstí, tak určitě nějaké minifigurky, kteří něco nakupují. Také máme dítě od farmáře, ale kde je sám farmář? Kdo se stará o kozu? Určitě by set vypadal lépe, kdyby tam bylo alespoň 12 minifigurek
Dobrý výběr. Osobně chci přidat z CMF barda, pasáka koz a rybáře. Kuchař mi napadl také, akorát ho budu muset udělat custom. Hledal jsem civilní středověké figurky v CMF a už jiné jiné nenašel...
You gotta use those magical fingernails your maker gave you to get that sticker back off. The trick is not to wrinkle the corner you choose to pick up, so choose an inconspicuous corner 👍
*LEGO sets in this video (affiliate links):*
*Medieval Town Square* ❯ bit.ly/LegoMedievalTownSquare amzn.to/3Vkfz8Y
*Disney Hocus Pocus* ❯ bit.ly/LegoHocusPocus amzn.to/49HZzBw
*Viking Village* ❯ bit.ly/LegoVikingVillage amzn.to/48m05Ey
I remove a lot of stickers. Use a razorblade insert on it's own and pry up the sticker. Use the blade to support the sticker as you pull it up with your fingers.
Thank you very much
Such a great set and so perfectly presented from you.
Thank you 🤗
Glad to know I’m not the only one to put the tapestry sticker on upside down. That’s what happens when I try to jump ahead and do the stickers without looking at the instructions.
You can use the sticker sheet itself (the smooth paper) to peel off the sticker and then re-apply it in the correct orientation. You can try it on simpler stickers first - just take the sheet and try to shove it underneath the sticker. You'll see that you manage to get the sheet underneath the sticker, and then you can grab it with one finger on top of the sticker, and the other one under the sheet.
I have found this useful too. However, in this case, I would leave it. I purposely did mine like this so I could use it with the bar at the top for MOC purposes.
Thank you so much for your suggestion!
This set is so cool, I really hope I can afford it in the near future
Certainly, the set appears stunning, and as demonstrated in the video, the price per piece is quite reasonable. Stay tuned for more videos, as I'm preparing a little surprise in the near future.
I like the video. But the sticker saying "beware" is not about any of the dragon knights. But it is about the fright Knights specifically showing Basil the Batlord on his dragon (referencing an old set small set where he came with his dragon and a scepter with a bat on it) ... this is further drawn upon by the bat hanging in the tower.
Very good review excellent jobs
Thank you very much
This + castle has a nice retro fun style and combines perfectly
I just bought one of the last Blacksmith sets in Brazil (my country). Unfortunately don't fit well with medieval sets.
there are some great MOC potential for it though for more store fronts. or make a keep for the lions knight castle
@@MegaRamonBatista
I like to set the Medieval Blacksmith outside the village in the forest so it's with the Forestmen. Fits better that way. This way it can be part of the same world and be special in its own way.
I've set up a small display featuring the medieval town square, the Viking village, and the Hocus Pocus set, all of which exude medieval vibes. However, I've noticed they don't complement each other well. My issue is that the Hocus Pocus set is on a larger scale compared to the other two. I think this might be similar to what's happening with your Blacksmith set.
Yes. Get a utility knife (as you would use to cut cardboard from a hardware store say) and carefully slide the sharp blade under the corner. You'll be able to pry off the sticker fairly easily. I've done this many times, for second hand lego or lego where the replacement sticker sheet is only available internationally. Say about 80% of them are perfect and there's no noticable defect. Be careful though, as there's a non zero chance you would upset the glue and have a corner that comes up, which is fixed by more glue :) I've never actually cut the sticker at all via this method.
Thank you very much for your advice
I finished this set the other night. My only complaint was when they have you put little decorations in the room after the walls are finished. My fat fingers had the hardest time with some of those lol.
I was looking forward to the day you made this video! I personally love this set very much. Definitely agree about it's flaws but they are small and easily made up by all the charm in the set. It's a perfect companion to my Lion Knights' Castle. I truly hope we get more sets showcasing the life of the villagers.
In regards to the upside down sticker, you can make the most of it by setting up a spot to hang it in any of your personal castle sets because if you hang it from a high up place like the banners in Hogwart's main hall, it'll look like it's the right side up!
The flaws are indeed minor, and overall, it's a fantastic set. My only wish is that there were more minifigures, as the town square should be bustling with life; currently, it feels a bit empty.
I was also considering hanging up the sticker somewhere so it would face the correct direction. Thank you for your help
I also reversed the sticker I was able to carefully slide a fingernail under the edge and take it off when I put it on the right way it worked out and there’s no indication that it had been messed up at all
Thank you for the tip, and it's comforting to know I'm not alone in making this mistake. It seems a few of us have encountered it.
awesome review 👍
Thank you
I felt like I was listening to a happy version of an H.P. Lovecraft book :D Love it.
Haha, thank you
Awesome way - thanks for sharing and we’d definitely love to feature this one! We also love the Snow White Castle!! 😊 thanks for a great video we’ve been watching your videos this morning! we will be back to watch more!
Thank you guys
Contact Lego support and they’ll send you a new sticker set
Thank you for the tip
No they dont
@@ronaldocrrs they did for me
I don’t think cheese is brewed 😂😂
Pěkné video, těch figurek by to chtělo opravdu víc. Jaké další figurky by jste přidal vy?
Určitě bych si přál, aby tam byl kuchař, jelikož máme jedno patro vyhrazené pouze pro kuchyni, ale nikdo v ní není. Pak možná nějací lidé popíjející pivo o patro níže. A jelikož se jedná o středověké náměstí, tak určitě nějaké minifigurky, kteří něco nakupují. Také máme dítě od farmáře, ale kde je sám farmář? Kdo se stará o kozu? Určitě by set vypadal lépe, kdyby tam bylo alespoň 12 minifigurek
Dobrý výběr.
Osobně chci přidat z CMF barda, pasáka koz a rybáře. Kuchař mi napadl také, akorát ho budu muset udělat custom.
Hledal jsem civilní středověké figurky v CMF a už jiné jiné nenašel...
You gotta use those magical fingernails your maker gave you to get that sticker back off. The trick is not to wrinkle the corner you choose to pick up, so choose an inconspicuous corner 👍
Thanks for the tip!
For your sticker needs ua-cam.com/video/fRMLiOzkw4I/v-deo.htmlfeature=shared
Thank you very much