If I was being really picky - i say that’s a T-Copter not a Y 😄. I used to build and fly tricopters, T-copters and they were different. Wonder what happened to simplecopter…showing my age there! Keep up the great videos!
Hello! For drift car chasing would you buy the Y6 or something else instead? My geprc cinebot30 is not powerful enough if a gopro is attached to make footage.
And again an excellent review, the last Hexa i build was ages ago, and was a AliExpress F550 Flamewheel Clone, with an Pixhawk Controller. It was flying great, but was a nightmare in terms of battery runtime. 2x 5200mah 4S but still just 15 minutes even with just a GoPro and a 3 Axis Gimbal.
I would like to hear a follow up, after you acclimate to flying with higher camera tilt. I imagine you will have a pretty different take on the whole thing after a dozen packs. The low weight, and extra props should be tremendous! Makes me think about using it as a chase rig for faster vehicles (maybe rc jets?). I noticed that the action cam on top REALLY blocks the airflow to the rear props :( Probably best without it
Cool novelty factor is the biggest plus but not too keen on relearning how to fly because for me acro is what’s up. Also the motors maybe could be a little more beefy. I might pick one up tho just cuz. Another good Rimzler report. Thanks
Great review and drone, but dual motor setup - never - will be more efficient than a quad setup, it's fact. Nevertheless, it's a great drone, the 6in1 aio is sweeeeet :)
Nothing new, we already seen 3 arms drones before and they turned out to be a bad design. No wonder people and manufacturers stopped making these. Bardwell had last year a video about bad designs since the first drone models and this 3 arm design was among them. I wouldn't be surprised if this model gets discontinued early
12:55 "I don't wanna acro too much"
*immediately proceeds to do Powerloops*
Straight up my favourite drone channel on YT right now. Remember us when this channel blows up!
ive been waiting for someone to do a review of this drone! thank you!!
T-copters are comprised on the yaw axis, that with your very high cam angle is what is getting you uncoordinated with the yaw and roll.
If I was being really picky - i say that’s a T-Copter not a Y 😄. I used to build and fly tricopters, T-copters and they were different. Wonder what happened to simplecopter…showing my age there! Keep up the great videos!
Yeh, tricopter Y6 is nothing new, LOL
Technically it’s not a T ether, it’s a cross
@@YOKokob 😄 True
iv been eyeing this drone
Funny thing: i just asked you in the comments of previous video "will you do the review for this drone" - and you uploaded it :)
New shape of drone! ;D Y copters with gyros and a servo was where all privet drones started!
Hello! For drift car chasing would you buy the Y6 or something else instead? My geprc cinebot30 is not powerful enough if a gopro is attached to make footage.
And again an excellent review, the last Hexa i build was ages ago, and was a AliExpress F550 Flamewheel Clone, with an Pixhawk Controller. It was flying great, but was a nightmare in terms of battery runtime. 2x 5200mah 4S but still just 15 minutes even with just a GoPro and a 3 Axis Gimbal.
The FC Stack will be available in one week. AddictiveRC will have them.
Curious why you didn't film the takeoff?
I think you don't like the camera angle?
I'm with you on a good way to carry one big one medium and one small I have actually been wanting to let go of somethings to get down to just that.
what is the best 5 inch and the best fpv drone under 250 grams (with a digital camera)?
Great vid.
Great review 👍🏼
Thanks for doing this..
I would like to hear a follow up, after you acclimate to flying with higher camera tilt. I imagine you will have a pretty different take on the whole thing after a dozen packs. The low weight, and extra props should be tremendous! Makes me think about using it as a chase rig for faster vehicles (maybe rc jets?).
I noticed that the action cam on top REALLY blocks the airflow to the rear props :(
Probably best without it
Interesting note about the action cam and the rear props, thanks!
Looks nice, I think its for heavy camera.
Cool novelty factor is the biggest plus but not too keen on relearning how to fly because for me acro is what’s up. Also the motors maybe could be a little more beefy. I might pick one up tho just cuz. Another good Rimzler report. Thanks
2 parole e ho subito capito eri italiano ahah grande 💪🏽
is the latency on o3 so strong as we see on this video? the dvr shows the fast rolls really later than the internal video
If i order a drone (~400$) from germany at the geprc website is there going to be tax fees?
Great review and drone, but dual motor setup - never - will be more efficient than a quad setup, it's fact. Nevertheless, it's a great drone, the 6in1 aio is sweeeeet :)
Dji control link?
The question is in its name: WHY 6? Three or four motors would have done the same job with less weight and easier compatibility with existing ESCs.
Look weird, but cool!
where are the chicken? 🐓
glad you didnt broke more props, we wouldnt see the action mounted part of the video xD
Could this frame be used with only 3 motors and propellers? If so it could be really useful to ukraine fpv squads
3 motors needs a servo on the back motor to swivel, but you can run it with 4 motors (1 left, 1 right, 2 in back) called a Y4 config
Soooo, a hundred dollars less given one less arm? 😂
Good chit man, booom 👊👍👍🇺🇸
Too many failure points with 6 motors... the whole design screams $$$$ if you crash
The original idea belongs to Ludo Treize
and the drone called : frelon y6 frame
HGLRC had stolen it from Ludo. Shame on them !!!
Nothing new, we already seen 3 arms drones before and they turned out to be a bad design. No wonder people and manufacturers stopped making these. Bardwell had last year a video about bad designs since the first drone models and this 3 arm design was among them. I wouldn't be surprised if this model gets discontinued early