How to use Kirby attachments | Kirby Avalir 2 Review | Kirby Accessories | Local Kirby Dealer

Поділитися
Вставка
  • Опубліковано 5 жов 2024
  • How do you use vacuum attachments?
    You can also your vacuum hose with a smaller handheld attachment. Use the crevice tool along the edges and corner and use the upholstery tool for the tread if you needed. Use the circular dust brush attachment and start at the ceiling.
    What are vacuum attachments for?
    If a vacuum comes with attachments, these will be included.
    Crevice Tool. ...
    Dusting Brush. ...
    Upholstery Tool. ...
    Extension Wand. ...
    Motorized Brush Head. ...
    Bare Floor Brush. ...
    Power or Turbo Brush. ...
    Mattress Attachment.
    How do I take the nozzle off the front of the unit (and put it back on)?
    A: To remove the power nozzle, or front head of the vacuum, first make sure the unit is turned off and is unplugged. Press the Toe-Touch pedal all the way down. Then, raise the headlight hood, pull the belt lifter handle toward you and turn it counterclockwise until the red arrows line up. Once the read arrows are lined up, turn the Accessory Lock counterclockwise, which will release the Power Nozzle. Now you may remove the nozzle and attach your next accessory and lower the hood.
    To re-attach the power nozzle, follow the steps above to remove the attached accessory. Once that is off, the belt on the Power Nozzle should be stretched on the hook inside. (If it is not, flip out the belt lifter handle and turn it counterclockwise until the red arrows line up. The hook should catch and stretch the belt inside.) Rest the two hooks on the rear of the Power Nozzle over the attaching bar on the front of the vacuum. Then push the nozzle against the unit and turn the Accessory Lock clockwise to lock in place. Flip out the belt lifter handle and turn it clockwise until the green arrows line up. This will release the belt from the hook to spin the brush roll.
    How long is the warranty?
    A: There is a three year limited warranty and a Lifetime Factory Rebuild program for those Kirby systems purchased from authorized Distributors. Please check here for details on the warranty plan and rebuild program.
    Q: How come the unit won’t turn on when I press the power button?
    A: First, make sure the unit is plugged in, and then check that the accessory connected to the unit is properly attached. Depending on what attachment you’re using, make sure the Power Nozzle, Hose, Carpet Shampoo System or Air Intake Guard is properly attached. Then, check to see if the Mini Emptor, Shampoo Take, or Hose is properly attached to the side. If those are all connected properly, your unit should turn on.
    How do you clean vacuum attachments?
    Step 1: Wash the Vacuum Brush. Take the vacuum brush attachment off of your vacuum cleaner and hold it over a bucket with warm water and a mild detergent such as dish soap. Dip a stiff bristle brush into the solution of soap and water and scrub the bristles of the vacuum brush attachment by hand.
    Acevacuums is conveniently located in Loudoun County and Fairfax County to serve customers from Ashburn, Sterling, Leesburg, Great Falls,Herndon, Vienna, Fairfax, Tysons Corner, Falls Church, Annandale, Reston, Chantilly, South Riding and other cities. We sell the best Vacuum cleaners, Air purifiers, Robotic vacuums, Central Vacuums, Carpet Shampooers, Commercial Vacuums, Floor polishers, Zone heaters and Fans
    Fairfax Store : 11110 Lee Hwy, Fairfax : Call 703 997 9292
    Ashburn Store : 44190 Waxpool Rd, Ashburn : Call 703 997 9292
    Leesburg Store : 954 Edwards Ferry Rd, Leesburg : Call 703 997 9292
    www.acevacuums.com

КОМЕНТАРІ • 11

  • @vernonsteinkamp1088
    @vernonsteinkamp1088 2 роки тому +4

    Pretty sure this guy consumed a pot of coffee prior to this.
    What about the attachment that spins in the center?

  • @timothykosatka2483
    @timothykosatka2483 4 роки тому +6

    How was that useful on how to use my attachments

  • @paolicka
    @paolicka 6 місяців тому

    Can you go any faster? I’m already lost with all of the attachments, I was hoping for some user friendly explanation

  • @michellewhite5543
    @michellewhite5543 2 роки тому +3

    I can't see it!! Where does it go?

  • @liltcup76
    @liltcup76 3 роки тому +4

    I'd like to know all of the attachments that come standard with this model.

    • @bsanchez3563
      @bsanchez3563 9 місяців тому

      If I am correct they are optional.

  • @paulvideo05
    @paulvideo05 Рік тому

    What is water-based paint?

  • @steverieck2920
    @steverieck2920 3 роки тому

    Latex paint IS water-based paint

  • @bsanchez3563
    @bsanchez3563 9 місяців тому +1

    Do you also buy and trade/sell refurbished vacuum cleaners?