Awesome TV Boxes Check Them All Out Here www.gearbest.com/tv-box-c_12313/?lkid=78003117 Check out the Beelink GT-King www.gearbest.com/tv-box/pp_009284337237.html?wid=1349303&lkid=78003165 Budget Friendly TV box www.gearbest.com/tv-box/pp_009704434969.html?wid=1433363 True Force of Nature TV box: Beelink GT-King Pro www.gearbest.com/tv-box/pp_009608757058.html?wid=1349303 Gearbest Deals Page www.gearbest.com/promotion-Double-12-special-3908.html?GB_regular_191210_157597612_i12&eo=8V46WLP7ZOBCTV15&lkid=78003195 Gearbest Mobile Phone Deals www.gearbest.com/cell-phones-c_11293/?GB_cellphone_gb_191209_1575886435_y12&eo=CZC417HDMLI2LS0R&lkid=7800324
Great video, please i have a doubt. This tutorial is only to Amlogic devices or working on Rockchip devices? Work in all android versions or only in old versions (4.4.x 5, 6 etc)?
Don‘t use superSU unless you made sure you are not root already. ES Explorer should let you enable the root switch without superSU. But superSU does replace some boot files that will prevent Android from booting. At least on the 2017 X96 mini I have here with Android Nougat. So if you don‘t want to reupload your firmware to get behind the recovery menu, I‘d skip the part with superSU. It seems to be unnecessary anyway.
@mxqproject Great video. Failed to register for forums on your site so sent email. Questions: 1. Will remote.config need be changed if I just installtointernal? Does that mean original Android /system/etc remote.conf is being used by the new LibreElec install after Android wipeout ? 2. If I copy a new remote.conf file to LE boot SD card (over writing its file) will that suffice? Or do I have to copy to folder as in your video?
Greetings, look, you will have the link of the file to download the remote config since I have a tv box with android version 7 and the issue of the infrared remote control does not work and the RAC output does not work either, that is, AV audio and video only works with HDMI since your link is down I hope soon response
I updated the firmware on my TV box and my remote stopped working. I have a Rii 8 remote also but the Rii doesn't have an on/off button so I have to plug/unplug my TV box every time I want to watch it which is a pain in the you know what. I will try this and see if it works, thanks mate.
James Spry hi I have tried this on android 6 and below boxes and it works. Normally it's in \system\etc but I did see the config in other folders as well. Good luck
Thanks. I was sceptical but bit really worked. Dont know why my remote stopped working. Could not even factory reset as it wouldn't move the cursor in the boot screen. Discovered a USB Mouse worked and allowed a factory reset, then installed this remote config file in the etc folded and it's like new :-)
Dude Thank you so much , I downloaded 4 remote files with the directions you provided, one thing I have to mention is to rename just to remote.conf my files were named remote1.conf, remote2.conf etc.. to distinguish between them, when you copy/paste in the box just rename it to remote.conf, I hope that helps, great video!
Hi, I have a TVbox V8 Wechip and the remote control is no longer useful. has Android 7.1.2. I did not find the file folders as you explained in the video. Can you help me replace the remote.conf file?
Friend I have a tv box I connected a joystick and I lost access to all controls both the remote and the joystick without full access to the tv box what do I do please
Hi again. I figured out the ir remote for android 7.1. I made a remote.cfg and then remote_mouse1.tab, reboot and it works 😊 I extracted my remote.config then opened it in viewer pro and edited it in the original. But I like to thank you for video. This video got me read up on how things works. But after all this headache of how to make it to work and finally figured it out, I moved to libreelec on internal install. I get 7.1 trueHd and dts-hd master sound without having error. Have an awesome day.
Helo i have problem with remote controller of mx10 android box, everything was fine until i installed some gampepad tester and after that on my remote ok button, home button and mouse on off button doesnt work anymore.....i try to copy paste all the files but it didnt help, can you give me advice how to find corect remote conf or how to find and write code for these 3 buttns , andorid 7.1.2 ??
I'm not sure I understood correctly. Did you install a game patch? Then remote stopped working or did you install android 7.1 mod? If only a game patch then Uninstaller should work. But if it's the whole Android platform then you need to find your original platform and burn it to your device and start from the beginning. It sucks but only way. Hope it helped dude
It may be a "simple process" to get the IR remote working again but getting the android box 'rooted' is not a simple process which , like you said, is required for this to work.
I updated MXQ with the firmware from the project. It works flawlessly. Of course my remote isn't working. I did the step by step on here and when I go to delete the remote.conf and remote1.config, it says error and doesn't delete the files. SuperSU was installed and I gave it full access. I installed the ES Explorer like the video said. What am I doing wrong that it's not letting me delete the files?
I wonder if there is another way howto do it since I can't get es file explorer in my device. The android version that I have on my tv box is 5.1 and the es file explorer requires 8.1 and up
Hello i have a problem,I had saved the remote config file and after i flashed a new rom my remote didnt work,so i did all the steps in the video and it worked but when i restart or close the device the remote wont work anymore.Any help?
Hallo da ich habe mein Q+TV box nach Anleitung installiert, ich bekomme den Logo und danach das Start Bildschirm mit apps. WLAN zeigt sich auch an und auch meine Speicher Karte und USB Speicher. Und das ich alles was angezeigt wird, ich kann mein Konto nicht öffnen um mich anzumelden noch apps benützen .was tun ...Hilfe
I have installed ROM for amlogic S905w V2c but volume control and some other functions stopped working. Your method says to have rooted devise. But there is no ways on internet showing steps of rooting ATVExperiance ROM. Plz Help
Zup dude. Firstly, like your way of simplifying things. Makes everything easier. Secondly, there are no remote.config or remote.cfg in android 7.1. I updated my qbox that was build on nexbox 95x to their android 7.1 and its pretty awesome. First time kodi works with passthrough master audio and truehd without SD card libreelec boot up. But no ir remote. Only thing I can find on www is that I have to unpack, switch dtb.img then repack, which is also a headache. Can you help? Or look into it and give me your thoughts? Thanks in advance for your time and keep up the great work
MXQ PROJECT thank you for your fast response. Yes I am using rii keyboard with USB dongle which works flawlessly. But only problem is to turn on the box. I added visual off key to it (from market) If I can figure out how to turn it on then ir remotes really doesn't matter. Thanks again for your time
No matter how many times i tried, system freezes up. I tried all root explorers. Is there any option to copy file to etc folder? Like adb? Ps. Root permission is always granted
Sir..thanks alot for this video..i installed USB/BT joystick app..then i remove it..after that my remote cont. OK and cursor button not works..no remote.conf found in etc..i download 4 files"that u mentioned" and paste one each time and rebbot but still not works..kindly advice
It just happened the same way to me. I installed usb/bt joystick and after that Ok and other buttons like the mouse do not work. Uninstalled it but stayed the same. I tried factory reset, no go. I will install again the stock firmware, I hope that works.
I seem not to be able to insrall the right software to make the supplied remote to work on a MXQ BOX...Need a place to get (all) the drives or something ? What can be done...Previous instructions did not work. All happened after an upgrade? Please really help THX
The ETC folder within your android system is where the Remoteconfig files are store - This video show you how to access this folder and change and swap over those config files
I did find some Remote files and I do have some results but it is after doing something somehow gone again..What can that be? Still the wrong file? Thanks Gr Kees
help me please after updating firmware remote does not work i have follow this steps but is not working. my box is allwinner H3 chipset. please help me
Hi the first remote config file worked for me, all buttons seem to work fine apart from the mouse button. Usually i get a cursor appearing. any help would be appreciated.Thanks
Can only suggest try another config file, use another wireless emote or even learn how to write your own config file, theirs a number of guides on the internet.
Hello ! I am using Android 4.4.2, I have flashed the new rom, it is still 4.4.2! But I can't use the original remote! I don't see the remote file in the original rom 4.4.2! Please help me ! Thank you very much
Hi i have H96 MAX x2 IR Remote Control how can i get Remote-Config for this Device can you give me the link download or where can i find it can you help me because my one remote doesn't not turning off/on
Hi, Mat. Greetings from Spain. Great channel. I have a problem with my X96 mini remote. The Stop buttom doesn't work properly, works like Play/Pause buttom. I open the remote.conf file with ES File Explorer and see 0x52 124 #MEDIA_PAUSE and # 0x52 128 #MEDIA_STOP. I guess that's the problem so I edit the file and leave 0x52 128 #MEDIA_STOP (without #) only, but the problem remains. Stop buttom is Play/Pause buttom. Any suggestion? Thanks in advance.
Fixed. My box is a X96 mini with Android 7.1.2. In my etc folder there are 2 files: remote.conf and remote-mouse.tab. Remote.conf seems useless but I edited remote-mouse.tab and...voilà!
@@minifunkyman All buttons in my remote work properly now. If you need it I can email you my remote-mouse.tab file so you can compare all key codes with yours.
I have an MXq box that I can't even turn onas the remote doesn't seem to be paired at all. I just see the red LED inside the box. How can I turn this on please>
Hello my friend I have installed NEXBOX-A95X_S905X_7.1_8189_8g1g_17111 on the T95N Mini mx + device. My remote control is no longer working. I watched your video but couldn't find the solution. There is no remote.conf file in the etc folder. instead they have remote_mouse1.tab and remote_mouse2.tab files. Can I make a correction with these?
Dude, I have little information. I found the following article, but I don't know how I can do the encoding for my device. Can you help me? Developers will also need to be aware the way to handle remote control codes has changed. The /system/etc/remote.conf is gone, and instead Amlogic defines the codes in a specific DTSI (Device tree) file for remote code that includes definition for 3 remotes and starts with: Shell remote:rc@c8100580 { compatible = "amlogic, aml_remote"; dev_name = "meson-remote"; reg = ; status = "ok"; protocol = ; interrupts = ; pinctrl-names = "default"; pinctrl-0 = ; map = ; release_delay = ; max_frame_time = ; /*set software decoder max frame time*/ };
the remote works but it doesnt power on the box.the blue led doesnt come on since lollipop upgrade.so i need to unplug box to power up the box.still only red light
suficiente trabajo con recopilar ya que no los encuentras en cualquier lado jajaj intenta uno por uno no es tanto relajo en eso ando espero me funcione
ninguno me sirvio, encontre uno con la imagen de mi control pero aun asi no logro hacerlo funcionar alguien sabe que otro metodo hay entonces para reparar?
Stupid question time! I've used the link to get to the remote conf files but they don't download, they just open up as text and I can't seem to create my own file to send to my SD card, any ideas peeps?? Cheers
I used the file and I have the M8S Android box and the remote did not work with it. do you have the file for the M8S Android box? If you do have the file please send me it.
Same here. I own a mx10 pro 4gb/32gb and on my remote just a few of the keys work (up, down, etc..), but OK, mouse, home, options, these do not work. Does some one how I can fix this problem? I have followed this tutorial but does not work for me as there are no files in the folder "etc". Even I copy one of these files, still does not work. Is it probably because mine is on Android 9? And the file structure is probably different?
Most MXQ firmware is usually already rooted, usually need a rooting tool to do this - I am unaware of any that will work on MXQ firmware as it to generic hardware
Awesome TV Boxes Check Them All Out Here
www.gearbest.com/tv-box-c_12313/?lkid=78003117
Check out the Beelink GT-King
www.gearbest.com/tv-box/pp_009284337237.html?wid=1349303&lkid=78003165
Budget Friendly TV box
www.gearbest.com/tv-box/pp_009704434969.html?wid=1433363
True Force of Nature TV box: Beelink GT-King Pro
www.gearbest.com/tv-box/pp_009608757058.html?wid=1349303
Gearbest Deals Page
www.gearbest.com/promotion-Double-12-special-3908.html?GB_regular_191210_157597612_i12&eo=8V46WLP7ZOBCTV15&lkid=78003195
Gearbest Mobile Phone Deals
www.gearbest.com/cell-phones-c_11293/?GB_cellphone_gb_191209_1575886435_y12&eo=CZC417HDMLI2LS0R&lkid=7800324
why so hard to find roms?
Great video, please i have a doubt. This tutorial is only to Amlogic devices or working on Rockchip devices? Work in all android versions or only in old versions (4.4.x 5, 6 etc)?
this process works, none of the files worked on mine so now I've got to go fishing. thank you for the head in the right direction though
Thank you, that did help me very much. One oft the 4 remote-configs was the best for my MX Q Pro 4k (Amlogic S905, Android 6).
Your most welcome
my remote cannot setup for remote my LG, it always blink when i pressed the power button in remote tv control menu, cannot hold the red lamp
Don‘t use superSU unless you made sure you are not root already. ES Explorer should let you enable the root switch without superSU. But superSU does replace some boot files that will prevent Android from booting. At least on the 2017 X96 mini I have here with Android Nougat. So if you don‘t want to reupload your firmware to get behind the recovery menu, I‘d skip the part with superSU. It seems to be unnecessary anyway.
@mxqproject
Great video. Failed to register for forums on your site so sent email.
Questions:
1. Will remote.config need be changed if I just installtointernal?
Does that mean original Android /system/etc remote.conf is being used by the new LibreElec install after Android wipeout ?
2. If I copy a new remote.conf file to LE boot SD card (over writing its file) will that suffice? Or do I have to copy to folder as in your video?
Greetings, look, you will have the link of the file to download the remote config since I have a tv box with android version 7 and the issue of the infrared remote control does not work and the RAC output does not work either, that is, AV audio and video only works with HDMI since your link is down I hope soon response
I updated the firmware on my TV box and my remote stopped working. I have a Rii 8 remote also but the Rii doesn't have an on/off button so I have to plug/unplug my TV box every time I want to watch it which is a pain in the you know what. I will try this and see if it works, thanks mate.
James Spry hi
I have tried this on android 6 and below boxes and it works.
Normally it's in \system\etc but I did see the config in other folders as well.
Good luck
Thanks. I was sceptical but bit really worked. Dont know why my remote stopped working. Could not even factory reset as it wouldn't move the cursor in the boot screen. Discovered a USB Mouse worked and allowed a factory reset, then installed this remote config file in the etc folded and it's like new :-)
will the navigation keys on remote also work in apps that i sideloaded...or i have to use the airmouse function?
Dude Thank you so much , I downloaded 4 remote files with the directions you provided, one thing I have to mention is to rename just to remote.conf my files were named remote1.conf, remote2.conf etc.. to distinguish between them, when you copy/paste in the box just rename it to remote.conf, I hope that helps, great video!
Hi nice info. It works for other TV boxes too. Also could I know what "Launcher" you are using in this video?
Thx for this video...
I try it with custom android pie
But it s fail...the file remote.conf is not in the same folder
2nd one worked for me. Thank You !
Hi, I have a TVbox V8 Wechip and the remote control is no longer useful. has Android 7.1.2. I did not find the file folders as you explained in the video. Can you help me replace the remote.conf file?
Friend I have a tv box I connected a joystick and I lost access to all controls both the remote and the joystick without full access to the tv box what do I do please
Hi again.
I figured out the ir remote for android 7.1.
I made a remote.cfg and then remote_mouse1.tab, reboot and it works 😊
I extracted my remote.config then opened it in viewer pro and edited it in the original.
But I like to thank you for video. This video got me read up on how things works.
But after all this headache of how to make it to work and finally figured it out, I moved to libreelec on internal install. I get 7.1 trueHd and dts-hd master sound without having error.
Have an awesome day.
Helo i have problem with remote controller of mx10 android box, everything was fine until i installed some gampepad tester and after that on my remote ok button, home button and mouse on off button doesnt work anymore.....i try to copy paste all the files but it didnt help, can you give me advice how to find corect remote conf or how to find and write code for these 3 buttns , andorid 7.1.2 ??
factory reset didnt help
I'm not sure I understood correctly. Did you install a game patch? Then remote stopped working or did you install android 7.1 mod?
If only a game patch then Uninstaller should work. But if it's the whole Android platform then you need to find your original platform and burn it to your device and start from the beginning. It sucks but only way. Hope it helped dude
Did you just put the names in the files, left them pure and reboot the tv box?
Hi. Could you please explain exactly what you did?
It may be a "simple process" to get the IR remote working again but getting the android box 'rooted' is not a simple process which , like you said, is required for this to work.
可以用固件解压打包工具,在Windows系统下更改配置文件。
Anyone knows how to configure in android 9.0??? Please help!!
In mxq pro 4k s905 nothing work, You can post a config for her?
I updated MXQ with the firmware from the project. It works flawlessly. Of course my remote isn't working. I did the step by step on here and when I go to delete the remote.conf and remote1.config, it says error and doesn't delete the files. SuperSU was installed and I gave it full access. I installed the ES Explorer like the video said. What am I doing wrong that it's not letting me delete the files?
I wonder if there is another way howto do it since I can't get es file explorer in my device. The android version that I have on my tv box is 5.1 and the es file explorer requires 8.1 and up
Hello i have a problem,I had saved the remote config file and after i flashed a new rom my remote didnt work,so i did all the steps in the video and it worked but when i restart or close the device the remote wont work anymore.Any help?
Hallo da ich habe mein Q+TV box nach Anleitung installiert, ich bekomme den Logo und danach das Start Bildschirm mit apps. WLAN zeigt sich auch an und auch meine Speicher Karte und USB Speicher. Und das ich alles was angezeigt wird, ich kann mein Konto nicht öffnen um mich anzumelden noch apps benützen .was tun ...Hilfe
I have installed ROM for amlogic S905w V2c but volume control and some other functions stopped working. Your method says to have rooted devise. But there is no ways on internet showing steps of rooting ATVExperiance ROM. Plz Help
How do you find the iP if your remote won’t let you into settings?
您好,请问一下,安卓9遥控器配置文件需要修改哪里
Thank you...works a treat
hi, I have a problem with my t95x, no longer recognizes the remote control, can you help me? I can not find the right file
Zup dude. Firstly, like your way of simplifying things. Makes everything easier.
Secondly, there are no remote.config or remote.cfg in android 7.1.
I updated my qbox that was build on nexbox 95x to their android 7.1 and its pretty awesome. First time kodi works with passthrough master audio and truehd without SD card libreelec boot up.
But no ir remote.
Only thing I can find on www is that I have to unpack, switch dtb.img then repack, which is also a headache.
Can you help? Or look into it and give me your thoughts?
Thanks in advance for your time and keep up the great work
I think nougat has a different setup for IR remote configurations - My advice is to just use keyboard remotes rather than these IR remotes
MXQ PROJECT thank you for your fast response.
Yes I am using rii keyboard with USB dongle which works flawlessly. But only problem is to turn on the box. I added visual off key to it (from market)
If I can figure out how to turn it on then ir remotes really doesn't matter.
Thanks again for your time
No matter how many times i tried, system freezes up. I tried all root explorers. Is there any option to copy file to etc folder? Like adb? Ps. Root permission is always granted
Sir..thanks alot for this video..i installed USB/BT joystick app..then i remove it..after that my remote cont. OK and cursor button not works..no remote.conf found in etc..i download 4 files"that u mentioned" and paste one each time and rebbot but still not works..kindly advice
It just happened the same way to me. I installed usb/bt joystick and after that Ok and other buttons like the mouse do not work. Uninstalled it but stayed the same. I tried factory reset, no go. I will install again the stock firmware, I hope that works.
I seem not to be able to insrall the right software to make the supplied remote to work on a MXQ BOX...Need a place to get (all) the drives or something ? What can be done...Previous instructions did not work. All happened after an upgrade? Please really help THX
The ETC folder within your android system is where the Remoteconfig files are store - This video show you how to access this folder and change and swap over those config files
Hi, Tanks for the reaction. I did what you say on the video. Where do I find these Config files to try ?
Like to hear from you soon. Thanks
I did find some Remote files and I do have some results but it is after doing something somehow gone again..What can that be? Still the wrong file?
Thanks Gr Kees
these are all the one's I have - mxqproject.com/files/Remote-Config-File/ - Try one at a time and delete each one before trying another
Yes it was helpful...Thanks
My remote control lost I got ir remote no paper work can you help me for android tv box thank you
I have a T9 box and the remote does not work with certain apps is there anything I can do to fix it
Nah, just use a mouse
help me please after updating firmware remote does not work i have follow this steps but is not working. my box is allwinner H3 chipset. please help me
Hi the first remote config file worked for me, all buttons seem to work fine apart from the mouse button. Usually i get a cursor appearing. any help would be appreciated.Thanks
Can only suggest try another config file, use another wireless emote or even learn how to write your own config file, theirs a number of guides on the internet.
Hello ! I am using Android 4.4.2, I have flashed the new rom, it is still 4.4.2! But I can't use the original remote! I don't see the remote file in the original rom 4.4.2! Please help me ! Thank you very much
Hey I have a m8x box and a rii 8 remote says connected but will not work ?
Hi i have H96 MAX x2 IR Remote Control how can i get Remote-Config for this Device can you give me the link download or where can i find it can you help me because my one remote doesn't not turning off/on
Could we make this to wifi
Not all es explorers will work. Please provide the version used in this video as the link provided is dead
By accident I unroofed my Mxq with this rom is there a away to fix it
Hi!
How i can use this firmware with the RemoteIME app? (for use my smartphone as remote control)
Hi, Mat. Greetings from Spain. Great channel. I have a problem with my X96 mini remote. The Stop buttom doesn't work properly, works like Play/Pause buttom. I open the remote.conf file with ES File Explorer and see 0x52 124 #MEDIA_PAUSE and # 0x52 128 #MEDIA_STOP. I guess that's the problem so I edit the file and leave 0x52 128 #MEDIA_STOP (without #) only, but the problem remains. Stop buttom is Play/Pause buttom. Any suggestion? Thanks in advance.
Fixed. My box is a X96 mini with Android 7.1.2. In my etc folder there are 2 files: remote.conf and remote-mouse.tab. Remote.conf seems useless but I edited remote-mouse.tab and...voilà!
hello, can you explain how did you edited this files? thanks
@@minifunkyman Hi. I edited the file (remote-mouse.tab) with ES File Explorer. I changed the 124 in the key 0x52 for 128 and fixed.
thanks , I will try!
@@minifunkyman All buttons in my remote work properly now. If you need it I can email you my remote-mouse.tab file so you can compare all key codes with yours.
i lost my remote is there any other way to turm it on?.
Im on android tv 9 and i can't find the remote conf . where should i look ?
Think it built into the kernel on android 9
I have an MXq box that I can't even turn onas the remote doesn't seem to be paired at all. I just see the red LED inside the box. How can I turn this on please>
Probably needs recovered
Thanks for the prompt answer, but what does that mean please? How do I go about doing whatever this is. Thanks.
Your box will be corrupt and that is why it will not switch on - need to reload firmware
Hello my friend
I have installed NEXBOX-A95X_S905X_7.1_8189_8g1g_17111 on the T95N Mini mx + device.
My remote control is no longer working. I watched your video but couldn't find the solution. There is no remote.conf file in the etc folder. instead they have remote_mouse1.tab and remote_mouse2.tab files. Can I make a correction with these?
just try and replace with the correct remote config file
@@MXQPROJECT Okay, but I can't find the location of the file.
There is no "remote.conf" in the "Etc" folder.
Where else am I supposed to look?
Dude, I have little information.
I found the following article, but I don't know how I can do the encoding for my device.
Can you help me?
Developers will also need to be aware the way to handle remote control codes has changed. The /system/etc/remote.conf is gone, and instead Amlogic defines the codes in a specific DTSI (Device tree) file for remote code that includes definition for 3 remotes and starts with:
Shell
remote:rc@c8100580 {
compatible = "amlogic, aml_remote";
dev_name = "meson-remote";
reg = ;
status = "ok";
protocol = ;
interrupts = ;
pinctrl-names = "default";
pinctrl-0 = ;
map = ;
release_delay = ;
max_frame_time = ; /*set software decoder max frame time*/
};
custom_maps:custom_maps {
mapnum = ;
map0 = ;
map1 = ;
map2 = ;
map_0: map_0{
mapname = "amlogic-remote-1";
customcode = ;
size = ; /*keymap size*/
keymap =
Dos de mis cajas mxq s805 no me habrán como le hago para abrir las?
?
Worked for me just had to grab the file online
I know this video is way old but I need the remote config files but your website is down. Is there a mirror or a way you can e-mail them to me?
Take a look on freaktab, should be able to find ir configs on their.
Hi , do you know path of remote config file in the rockchip devices?
Should be etc folder
@@MXQPROJECT no , it's not in folder etc .
check again but should be called LIRC config
the remote works but it doesnt power on the box.the blue led doesnt come on since lollipop upgrade.so i need to unplug box to power up the box.still only red light
@@pycohsalva4116 go on play store and download a power button
Thank you dear friend , Do you know the path of this config in rockchip boxes?
Should be the same, well I would imagine anyway.
MXQ PROJECT no I have looked it but unfortunately isn't same ! I could not find it!
@@nethots1702 True! The path is not the same. I have not been able to find that file or place it in the right folder.
Apakah ini bisa berfungsi di himedia Q1 mini agar remote bisa pakai remote tv tanpa remote air mouse lagi
Xq no muestras cuál es el modelo de Caja tv box.
Xq no todos los remote son iguales por ejemplo. Y los Android no son todos COMPATIBLES con los remote
suficiente trabajo con recopilar ya que no los encuentras en cualquier lado jajaj intenta uno por uno no es tanto relajo en eso ando espero me funcione
ninguno me sirvio, encontre uno con la imagen de mi control pero aun asi no logro hacerlo funcionar alguien sabe que otro metodo hay entonces para reparar?
Yo lo hice funcionar con un archivo propio tal vez te interese
hi ,is this only for mxq boxes......??
No same principle for all boxes
Is there a fix for Wifi because it doesnt work or come on
Yeah them ones or am i doin somethin wrong its just comin up as all letters and numbers am i tryin to download it wrong or something
right hand click - save as
Stupid question time! I've used the link to get to the remote conf files but they don't download, they just open up as text and I can't seem to create my own file to send to my SD card, any ideas peeps?? Cheers
Right hand click save as
I used the file and I have the M8S Android box and the remote did not work with it. do you have the file for the M8S Android box? If you do have the file please send me it.
qtt tv box m8s android
I dont have the file, best place to find it would be freaktab or xda - otherwise chuck it and get a wireless keyboard remote, much better.
When i delete "remote.conf" it comes back again
Great video it worked perfect.
Very good video helped me solve my problem
A Big Thank You!!!
Your welcome
Apakah ini bisa support di himedia Q1
i have the mx10pro and i can not connect remote controll...
Same here. I own a mx10 pro 4gb/32gb and on my remote just a few of the keys work (up, down, etc..), but OK, mouse, home, options, these do not work. Does some one how I can fix this problem? I have followed this tutorial but does not work for me as there are no files in the folder "etc". Even I copy one of these files, still does not work. Is it probably because mine is on Android 9? And the file structure is probably different?
link remote not worke please new link
Sorry to bother you mate. Could you guide me on how to root mxq s805 please. Thanks
Most MXQ firmware is usually already rooted, usually need a rooting tool to do this - I am unaware of any that will work on MXQ firmware as it to generic hardware
please you have file remote.config for MXR pro thank you
Here are all the configs I have - mxqproject.com/files/Remote-Config-File/
@@MXQPROJECT thank you i have find remote.config 4 for mxr pro and u2c z pro working good job👍
I'd like to try this but I dont even know how to turn the box on without the controller ☹️
Same problem here! Did you work it out?
none of the reomote config files are working anymore anywer to find them?
these ones - mxqproject.com/files/Remote-Config-File/
Mine didn't work after I tried them
i like your video
Were can I find the new Remote.conf file.
couple here you can try - mxqproject.com/files/Remote-Config-File/
how do i download the files when i go on n click on the file all i'm seeing is a whole heap of text... help pls
Where are the remote conf files??
mxqproject.com/files/Remote-Config-File/
thanks mate
Your welcome
Thanks dude!
Your welcome
showed me nothing
?
podriais hacer los substitulos en español, tendriais mas visualizaciones
What a piece of shit! You may as well use a Roku, Google, Amazon, or Apple box, you pay more but you get better quality. Ya get what you pay for....
nothing