“ You will always get what you pay for” it’s great to give the customer the most for what they pay for. That’s lookin out for the best interest for the customer and above all else that’s integrity. That install is without a doubt a piece of art. Everyone should lead by this example.
Excellent clean job as always. Problem where I Iive is people cry when you price a job and want to do the cleanest work but they don’t want to pay for it. That changeout had to be at least 18,000.00.
Hats off to you!! That is the dream to be able to do installs that perfect and make a living doing it. Thanks for sharing. And I agree about clients getting want they pay for. I've seen so many setups and installs/Retro that are just butchered. It is a shame sometimes homeowners have no idea about what they have.
Big fan of all the soldiering I work for a small local shop that prefers to soldier over pro pressing ! (Mainly because they’re old school) I love all your joints !
This is amazing work done. Customer must be so lucky. I am working with Local HVAC guy to built similar unit for indoor pool. I will keep you posted guys
Fireplace clean out has a minimum clearance to combustibles in Canada. Consult your local wett representative before altering the spaces around wood burning system. Otherwise, beautiful install!
I have to put in a Navien boiler 2 zones This means removing the old boiler and water heater. All this is in a closet off from the kitchen. I also have to throw down some tile. Do you think $12,000 is enough or even to much for the job? Tile I am putting down, is just to clean up the floor a little bit, not much work to put down the tile, and prep for the tile. By the way, where in Canada are you. Canuck sounds like NFLD? My mother was born and raised there. I am in NY now. I was born here.
Hey can u please make more videos explaining how combi boilers work and how the whole system and different parts do. First year apprentice in bc and wanna learn more about these
Nice job but you will have a lot of problems with that Navien boiler in the future with combustion leaks and seals leaking , also those flow and return primary pipes look on the small size to be feeding 5 zones , not a criticism just an observation.... 👍
Great video. I am doing a new build 4000sqft house with hydronic infloor heating. 6 bathrooms and 2 kitchens as I have a basement suite. Plumber recommends IBC boiler with 80 gallon storage tank. Any thoughts if the tank is necessary or combi boiler with on demand is sufficient? Also have you ever done heat pump hydronic systems?
Hey. I recently purchased a new built house which has the Laars MFTCW199NA2XN. 2 zone heating with recirculating hot water for far away domestic faucets. This boiler always go to Error 42 mode and stops working in the cold season when Thermostats is on. When error 42 happens, also red light on the device on top of the boiler comes on which says LOW Water. I called few plumbers and I almost spent $700 just for visit and diagnosing to those plumbers. They come, do some touches, open and close some valve or screws and leave, and after a few hours or days, again this error comes up. Normal pressure for this boiler is between 15 to 30 PSI. But I found out if sometimes if I open the increasing valve and increase the pressure to 26-28 psi, error goes away for few hours or lucky days. Also cleaning the air valve on top of the boiler might help. But I’m really tired of this situation. Do you have any idea it may help me? Or if you located in NYC, can you visit, please? Also condensation happens in the exhaust pipe and around pvc pipe is dripping, which I don’t know what should I do about it.
Nice job but you miss the back-flow preventer on the boiler make-up water if you have a problem with feed valve inside the boiler the heating water can escape in the cold drinking water.No good.
I’ve been working on a 20 year old system for a couple days for a customer and don’t run into the combination multi use radiant set up often where I’m at. There’s no traditional fill valve they use a Polaris tank and boiler. If I isolate and purge one zone at a time is the system filling itself or would you recommend using a non sub pump to push water through the loop while I drain the loop
@@786otto I love this. Naviens are complete trash. People that are loyal to them and install them are what is called “blind loyalty” you completely ignore the big problems. I have had countless navien units that are installed correctly but completely fail. 75% of the ones I come across have cross contamination and high cabinet temp. You can see this by seeing a bunch of oil all over the plastic parts of the heat exchanger. The pcb board turns brown due to high cabinet temp. The exhaust packing ring fails all the time. They are trash. “Facts don’t care about your feelings”
Your work is outstanding!! Real craftsmanship! Taking the time to do it right and make it serviceable for the future exemplifies your quality Sir!
James your work manship is inspirational. This is a perfect example of (lead by example.)
“ You will always get what you pay for” it’s great to give the customer the most for what they pay for. That’s lookin out for the best interest for the customer and above all else that’s integrity. That install is without a doubt a piece of art. Everyone should lead by this example.
That's not a boiler job, That's Art with passion.🤩
Excellent clean job as always. Problem where I Iive is people cry when you price a job and want to do the cleanest work but they don’t want to pay for it. That changeout had to be at least 18,000.00.
Your installation is just amazing. Wish I could find someone this methodical in WI to install.
Ya it’s weird I get asked to come and install all over North America ….but there has to be one contractor in your area that’s has that eye for detail
Love the pride you take in your work man. Really nice to see how clean of a job you do
Hats off to you!! That is the dream to be able to do installs that perfect and make a living doing it.
Thanks for sharing. And I agree about clients getting want they pay for. I've seen so many setups and installs/Retro that are just butchered. It is a shame sometimes homeowners have no idea about what they have.
Big fan of all the soldiering
I work for a small local shop that prefers to soldier over pro pressing ! (Mainly because they’re old school) I love all your joints !
Fantastic job. You have every right to be proud of it.
As always you do professional work. Keep up the high standard of quality work, that’s what separate you from the hacks!
that install is clean and professional those canucks did a great job!
Next level work 👍
Quality doesn’t cost - it pays !
This is amazing work done.
Customer must be so lucky.
I am working with Local HVAC guy to built similar unit for indoor pool.
I will keep you posted guys
Sweet and clean install, as usual.
JUST FREAKING BEAUTIFUL INSTALL.
Amazing job 🔥💪🏻
That looks great
I love your videos but as a new plumber I would love if you could explain a bit more about how the heating system works. The return and all that
Looks perfect.
Love the mounting bracket for expansion tank ! { Navien, ughhh }
Looks really good
Fireplace clean out has a minimum clearance to combustibles in Canada. Consult your local wett representative before altering the spaces around wood burning system. Otherwise, beautiful install!
I have to put in a Navien boiler 2 zones This means removing the old boiler and water heater. All this is in a closet off from the kitchen. I also have to throw down some tile. Do you think $12,000 is enough or even to much for the job? Tile I am putting down, is just to clean up the floor a little bit, not much work to put down the tile, and prep for the tile. By the way, where in Canada are you. Canuck sounds like NFLD? My mother was born and raised there. I am in NY now. I was born here.
why did you use zone valves in this install vs zone pumps on your other systems? what are pros and cons of valves vs pumps for each zone
Artwork!
Hey can u please make more videos explaining how combi boilers work and how the whole system and different parts do. First year apprentice in bc and wanna learn more about these
Thanks!
Nice job but you will have a lot of problems with that Navien boiler in the future with combustion leaks and seals leaking , also those flow and return primary pipes look on the small size to be feeding 5 zones , not a criticism just an observation....
👍
closely spaced tees/hydraulic seperation??
Onlt thing that sucks in this instalation is that pex b with flow obstructing fittings .
Great video. I am doing a new build 4000sqft house with hydronic infloor heating. 6 bathrooms and 2 kitchens as I have a basement suite. Plumber recommends IBC boiler with 80 gallon storage tank. Any thoughts if the tank is necessary or combi boiler with on demand is sufficient? Also have you ever done heat pump hydronic systems?
1:48 Not a plumber, never sweat a pipe, but I've usually seen the circulation pump on the cold (return) side. What's your thinking here?
Are the supply/return headers in the secondary side sloped or is it just the camera angle??
looks great, whats the reason for the condensate trap tho? genuinely curious. my condensate pipe at home just goes straight to the neutralizer pump...
Can you do a video on the roof venting?
Hey. I recently purchased a new built house which has the Laars MFTCW199NA2XN. 2 zone heating with recirculating hot water for far away domestic faucets.
This boiler always go to Error 42 mode and stops working in the cold season when Thermostats is on. When error 42 happens, also red light on the device on top of the boiler comes on which says LOW Water.
I called few plumbers and I almost spent $700 just for visit and diagnosing to those plumbers. They come, do some touches, open and close some valve or screws and leave, and after a few hours or days, again this error comes up.
Normal pressure for this boiler is between 15 to 30 PSI. But I found out if sometimes if I open the increasing valve and increase the pressure to 26-28 psi, error goes away for few hours or lucky days. Also cleaning the air valve on top of the boiler might help. But I’m really tired of this situation. Do you have any idea it may help me? Or if you located in NYC, can you visit, please?
Also condensation happens in the exhaust pipe and around pvc pipe is dripping, which I don’t know what should I do about it.
Nice job but you miss the back-flow preventer on the boiler make-up water if you have a problem with feed valve inside the boiler the heating water can escape in the cold drinking water.No good.
Didn't say what you did to vent. Were you able to use the old vent somhow?
I’ve been working on a 20 year old system for a couple days for a customer and don’t run into the combination multi use radiant set up often where I’m at. There’s no traditional fill valve they use a Polaris tank and boiler. If I isolate and purge one zone at a time is the system filling itself or would you recommend using a non sub pump to push water through the loop while I drain the loop
If you install a water softener do you need to flush it yearly?
Do cold temperatures effect the performance.
Where is the GRADGE ??
Are most boilers down in PG run off just city water?
Seems odd for somewhere that gets so cold (FSJ resident here, so just curious)
What kind of hangers are those on the headers? Never seen those before
Fantastic job are you guys hiring??,
always
How are you balancing the zones? Looks awesome.
It’s pipes in reverse return ….first one feed last is one too return
Navien is garbage. Otherwise nice work!
Navien цена качество ! Что купишь другое за эти деньги ?
@@Диванный64Эксперт You want to have to replace a bad pcb board, 3 way valve and heat exchanger in under 3 years? Buy a navien…
If you can not read and follow instalatin instructions,but it just show your incopetence makking those statements.
@@786otto I love this. Naviens are complete trash. People that are loyal to them and install them are what is called “blind loyalty” you completely ignore the big problems. I have had countless navien units that are installed correctly but completely fail. 75% of the ones I come across have cross contamination and high cabinet temp. You can see this by seeing a bunch of oil all over the plastic parts of the heat exchanger. The pcb board turns brown due to high cabinet temp. The exhaust packing ring fails all the time. They are trash. “Facts don’t care about your feelings”
Fire tube models don't have the horrendous leaking heat exchanger design
It seems nobody wants to tell anybody how much they charge for this work, I can only guess why.