dear sir. i want to do ZCD method but i will use an arduino to calculate the time difference using pulsIn instruction so can i use the same circuit but without the Micro controller that you used.
Hi Sir. Another concern, if I could not alter the current parameter of a AC sine voltage supply, how could I determine the proper inductance values of the primary and secondary side of the CT in series to the AC sine voltage supply? Hoping for a response. Thank you.
Hi Sir, I hope my comment would be noticed as I have a concern regarding Proteus 8 Professional. I would just like to ask on how could I change the current rating (I) of my AC sine voltage supply? Your response would be much appreciated. Thank you.
Sir, thank you for giving me access to the code. But where do I use the .c file? Also I designed the circuit according to you, but the voltage and current readings are shown as 0, what do I do? Please help sir
Sir, I am facing many problems in making this code... Can u please give me the access for the code so that I can get the file... And thank you so much sir for this beautiful information and giving us your valuable time
Relay module is not working sir when the pf is low I have switch on pfc but there is switching of capacitor as the module is not working please help me to solve this sir
please if it worked for you share your simulation file and code..am working on something similar i want to lesrn from it......email: cephasmorgans@gmail.com
Sir, i had tried a lot but the power factor is not actually improving, it is continuously decreasing also after connecting capacitor. So it is my humble request if you can suggest me the correct path.
@@mixatom966 hi sir can i send you my project i have properly follow your steps but light is not glowing means v= 0v can u plz solve this problem how can i send u tell me sir
@@mixatom966 thank you very much for your reply . People like you are not alot these days to help others to learn and benefit from your experience . May i have your permission? Thanks in advance
@@mixatom966 thanx so much for ur code . I've uploaded the hex file on the chip18f4550 but the lcd doesnt show any thing . Is it akind of protection of your code ?
Hi sir , i have solved the lcd display case but i wanna ask about what are the transformers ? Iam using 220vac/12vac transformer and it gives me a reading of 613volts on the display . And i dont know what exactly the current transformer factor ? Sorry ,i know that iam askin too much questions but iam in need to finish that project as its my graduation project . Thanks in advance
Sir i really need the Code to run the project. I have sent access email regarding that. Plz give me access to the code. My final year project is due. Please
Sir I am a final year student from electronics and telecommunication branch and i am this code for my final year be project . So please grant me the access to the code.
Hallow sir, I watched the full video of this project and I'm interested in doing it for my Design module as a semester project. May you please direct me on how I can access the code, I really need it urgently to finish my project.
Hello sir, very well shown, could you please give me access to the drive link for the code. I need it badly sir .Could you please give me access please sir
Sir kindly help I have completed the simulation, but when I try to upload the code into the microcontroller, (which you provided) It gives 2 errors. 1. Unsupported COFF file type. 2. Failed to load coff file. Thank you in advance
Sir I request you to give access for the code my final year project is due and I really need this code ASAP to complete the project on time. Thank you for this wonderful idea! Kindly look look into this matter soon.
Greetings Sir, I have sent a mail. i have tried designing your simulation in proteus and run it on but there is a problem in pf correction. I want to learn it better so can you please look into it? i am giving what i tried so far. Or can you please give me your design so that i can compare and figure the problem out?? I will be very helped and will be really appreciated. I will be waiting for your response.
drive.google.com/drive/folders/1KFz5BbSsEmuCRmrDcwtQI0qaoVLLWohI
Thank you, sir....
Hey can you please share the C Code. It's only hex code that is available here.
@@akankshsukumara same as well
Hi ; thank you for the video . can you Please accept the Request For Code.
hey please accept the request for the code it will be very helpful
PFI Problem Simulation Proteus 7 part-2
ua-cam.com/video/1FBWQzvExjA/v-deo.html
can i get the code please
@@riyadhbenabdallah6206 yea
access done
A GREAT PIECE SIR. MAY I PLEASE HAVE THE CODE.
Dear sir, please accept my request of the code. Thank you in advance sir
Thank you my good Sir, You Are a lifesaver.
can you please give me the code?
please send the code to my mail please
Thanks mate, you are a god send😊
Can anyone have the access to the code ? Kindly share Please !!!!
Please forward it to me brother
dear sir. i want to do ZCD method but i will use an arduino to calculate the time difference using pulsIn instruction so can i use the same circuit but without the Micro controller that you used.
yea u can ...arduino it is a kinda micro-c
@@mixatom966 thank you sir and have good day ❤
does your part 2 video have a different code?
Hi Sir. Another concern, if I could not alter the current parameter of a AC sine voltage supply, how could I determine the proper inductance values of the primary and secondary side of the CT in series to the AC sine voltage supply?
Hoping for a response. Thank you.
please send the code to my mail please
What’s the name of that instrumental? If you don’t mind me asking
Hi Sir, I hope my comment would be noticed as I have a concern regarding Proteus 8 Professional.
I would just like to ask on how could I change the current rating (I) of my AC sine voltage supply?
Your response would be much appreciated. Thank you.
please send the code to my mail please
Sir can I know what is the software that you use to code for this pic18f4550
sir can you give me the proteus file it is not working but its very urgent
THANK yoi so much for the video sir, can i pls get access to the drive
Sir please provide code
Grant me permission to acess the code .
Sir, please help me.
Please send me proper code in this project, which microcontroller is used?
Sir can this project be done using PIC16F77A
How impressive. Did u write the code on microc or proteus itself
yes i did ..program in mricro-c and simulation in proteus ...
sir the project is working but the relay module is working for switching of capacitors
relay for working capacitor..
Hello sir, could you please give me access to drive for the code. Thank you very much in advance.
I want to use arduino..please help me in this regard
Hello sir from where I can access your code, there's no link in the description?
check prly
Sir, thank you for giving me access to the code. But where do I use the .c file? Also I designed the circuit according to you, but the voltage and current readings are shown as 0, what do I do? Please help sir
same problem here. How did you solve it?
@@sumaiyasimu1812 try the circuit diagram shown at the end of the video, there's a little difference. Also tweak the transformer values a little.
Sir help me with the same please
thanks .
Hi pls can you help us
Hello sir could you please give me access to the code I need it urgently.
Greetings sir, please i whish to have access to the code to complete my project. Thanks in advance
Sir, I am facing many problems in making this code... Can u please give me the access for the code so that I can get the file... And thank you so much sir for this beautiful information and giving us your valuable time
Do you have the codes
Please provide me if u have the program code..it will be much useful for my fial year project
How can I access this simulation
This was so well done! may I please have access to the code?
Sir can I have the code please ,for my project
done
Share with me also sir i need this code very badly
Please help me to understand and work the c language file
Relay module is not working sir when the pf is low I have switch on pfc but there is switching of capacitor as the module is not working please help me to solve this sir
simulation or pratical?
Simulation
plz watch part-2
please if it worked for you share your simulation file and code..am working on something similar i want to lesrn from it......email: cephasmorgans@gmail.com
Sir,please give me premission to access to code cause i have to complete my project
Do you have the codes
Its only showing 605v and nothing else...plz send text code so that i can understand
I already sent you a request for the drive.
Can I please have the codes?
Its important to my project.
Sir, i had tried a lot but the power factor is not actually improving, it is continuously decreasing also after connecting capacitor. So it is my humble request if you can suggest me the correct path.
Sir, please answer 🙏🙏🙏
@@abhaymahar7427 watch part 2
or send me ur project
@@mixatom966 hi sir can i send you my project i have properly follow your steps but light is not glowing means v= 0v can u plz solve this problem how can i send u tell me sir
@@lalitroy3315 run that projects.
This is interesting.....Can u plz give acess to the code i have requested....i have already prepared schematic and waiting for code
Sir its showing 605v and nothing else...
This is a great work done. Sir may I have an access to the code?
Hey sir can you please give me access to the code?
What is the valuo of crustal
20hz
Sir can I get the proteus design file for this...
Sir in which software you generated the hex. File and the C Language code is not working please help me
micro-c
@@mixatom966 sir can we do this as hardware
Is it possible
Bro iam not able to compile and create hex file
Please help 🙏 me
could you please share your code again ?
drive.google.com/drive/folders/1KFz5BbSsEmuCRmrDcwtQI0qaoVLLWohI
@@mixatom966 thank you very much for your reply . People like you are not alot these days to help others to learn and benefit from your experience .
May i have your permission?
Thanks in advance
@@mixatom966 thanx so much for ur code . I've uploaded the hex file on the chip18f4550 but the lcd doesnt show any thing . Is it akind of protection of your code ?
Hi sir , i have solved the lcd display case but i wanna ask about what are the transformers ?
Iam using 220vac/12vac transformer and it gives me a reading of 613volts on the display . And i dont know what exactly the current transformer factor ?
Sorry ,i know that iam askin too much questions but iam in need to finish that project as its my graduation project .
Thanks in advance
Can you give me your email, i wanna make a deal with you ?
This was so well done! Can you give me acess to the code? I would like to do some tests
@mixatom966 Can I have the proteus file?
@@viniciusribeiro9413
Did he send you the code?
Sir i really need the Code to run the project. I have sent access email regarding that. Plz give me access to the code. My final year project is due. Please
Thank you for such an effort, kindly allow access to the hex file
hello sir, please give me access for the code.Thank you
Bhaiya this is showing blank file when added to drive and opening with winrar,bataiye aap kaise kru
i don't know y
Sir I am a final year student from electronics and telecommunication branch and i am this code for my final year be project . So please grant me the access to the code.
Wah, this is awesome man, I have requested for permission to access the code
access done
@@mixatom966 Thanks bro, you are the best
@@urbanusmutua6112 bro can you send me that code file
@@urbanusmutua6112 bro can u give me code please i need it very urgently...
Halo sir.. can you give me a code for this project? Thank you sir..
Hallow sir, I watched the full video of this project and I'm interested in doing it for my Design module as a semester project. May you please direct me on how I can access the code, I really need it urgently to finish my project.
link below
Bro u made this project
Do you have the codes
@daniel nakwenda did you get the code?
Thank you sir🙏
Do you have the codes
Please reply
Its very urgent sir the c text file is having some errors
Is this arduino based Project
Hello sir, very well shown, could you please give me access to the drive link for the code. Thank you very much.
Do you have the codes
I have done this project on proteus. I want code to simulate it. Sir, can you give permission to access the code..
Can i get the code sir???Plz!!!!
sir the code folder is empty !
check it again
Can u please send the code ????
@mixatom966 can you give the access of the code?
Thanks for your reply but I could not open that file. Can you send me again without zip or rar.
you need winrar software bro ...install your pc ....because normal file will be crack...so save file is rar file ...
Please provide code
Hi sir, I very much appreciate it if you could share the code...Thank you in advance sir
Do you have the codes
Sir plz send PDF copy of this program a after requesting I was not getting the mail plz send the PDF
Greetings sir, I wish to access the code for completing my project. Thanks in advance
Do you have the codes
can you please give the access?
i just requested for the code
Morning Sir can please have access to code and circuit diagram
Do you have the codes
@@rohanmistry7528 No
Have u made this simulation
Plz sir give me permission to access the code...it will be lot more helpful to crack our semister project..
power rail GND and VCC/VDD are interconnected to net ground how to solve this error
check the IC pin diagram
@@mixatom966 sir can you please provide me the ckt diagram
sir can u send me the code plz?
Very much helpful tutorial .Sir please give me the access for the code . Its and urgent for my semester final exam . Thanks in advance
brother can you share me the proteus file
Hello sir, very well shown, could you please give me access to the drive link for the code. I need it badly sir .Could you please give me access please sir
Can i get your code. I have practical exam on 6oct. If you can provide before that it will be big help :) thank you
Hello Sir, could you pleaase give an acces for code.
Sir kindly help
I have completed the simulation, but when I try to upload the code into the microcontroller, (which you provided)
It gives 2 errors.
1. Unsupported COFF file type.
2. Failed to load coff file.
Thank you in advance
simulation or real ic
@@mixatom966 simulation sir
@@arshadalilashari8420 watch you tube how to load file in simulator Proteus ..or watch my video care fully
@@arshadalilashari8420 check ic number , hz .etc again
@@arshadalilashari8420 okay i will
Sir please give me access to the code.
Can I please get access of this code
Sir, Good work, may I have a permission please for the code.
i am getting zero voltage on simulation.... can you help me?
watch properly video plz
Hey gaurav did your simulation done and voltage now show value tell me bro
This is urgent
Sir I want to make this project for my DEE FInal year , please give me a code
Do you have the codes
Sir I request you to give access for the code my final year project is due and I really need this code ASAP to complete the project on time. Thank you for this wonderful idea! Kindly look look into this matter soon.
Do you have the codes
can you please give me the code?
please sir help me access the code
Good day sir, Hope you doing well. could you please give me access to your code. thank you
good day sir,you project is interesting how can i get the code
please sir ,
for necessary , give me access to hex cod
Sir, please help me.
Please send me proper code in this project. 1st downloaded file was empty.
sorry for that bcz someone delete that file but now there hve file
@@mixatom966 sir please share the code and simulation file. I have send u the request.
Sir, Can i get the code
can you please give the access?
My final year project was in due.. thankyou in advance
Bro I'm unable get the output. It's showing V=0V,I=0A.Please do help me...
Need to complete this as soon as possible .Thankyou in advance
sir i have try to get the code through the link but it requires certain permission please i asked for access can you give me that
Sir thank you for giving me access but it is not working i dont know how but i get only the proteus file inside wich does't open on my proteus 8.0
Sir i request you sir for our final year project kindly help me sir so plz send me a code sir
Sir can i get code for this????
Dear sir. Can you give me this project code? I have already requested, please allow for access. Thank you
Sir, the code file is empty.😢
Please send me perfect file. Thank you.
i need the code and proteus file please please please :(
Hi sir can u give access to the code please
Sir help me to get the code please. Accept the request, thank you.
sir plz give me the code of this project?
acces done
Can I get the code please?
@@mixatom966sir, I need your Google drive access. Request sent.
please give me permission to access the code please
Sir, I have given you request for code and proteus file can you please give to me
Please give the access for code sir
Greetings Sir, I have sent a mail. i have tried designing your simulation in proteus and run it on but there is a problem in pf correction. I want to learn it better so can you please look into it? i am giving what i tried so far. Or can you please give me your design so that i can compare and figure the problem out?? I will be very helped and will be really appreciated. I will be waiting for your response.
send ur code and simulation to my email
@@mixatom966 Sir, I have already sent you a message to your email of this channel
@@sonygomez1144 okay ...i will check
@@mixatom966 Thanks sir
can someone please send the code
Bro kindly share the code. It is important for many. Atleast you can put the code in description
that is true......... we really need it please