Probably tomorrow i will put my plastic barrel in my room and i will start make videos. The humid its almost 80% outside and i can't breathe. The night also humid but no sun but i can't make video outside.
Hi. I made baffles of the foam. The silencer works fine on my HDP50, but not so great on the HDR50. I guess its because of the gap between the cylinder and barrel/frame.
Hi. The valveblock can be removed if you put in a restrictor in the CO2 tube. If you dont use a restrictor the revolver will fart and dump out all the CO2 in just one or two shots. Downside with removing the valveblock is you use a lot more CO2, but you get much more power.
The suppressor works great on my HDP50. Much lower sound/noise when I use it. But it dont dampen the sound much when I use it on the HDR50. Its because of the gap between the cylinder and barrel/frame.
👍, I wonder if I shot my gun like 30 times, and put it away for years, would I have to shoot it with Pell gun oil every one in a while to keep seals from dry rotting, or put silicone blaster down the barrel a few times a year if I don't shoot it, will silicone blaster spray seep in internal parts, or will seals be fine using nothin if stored in cool place?
Hi. All types of airguns/paintball marker etc need to be used, or the seals will fail. I recommend you use it at least once every 6 months or so. Put some silicone spray or simmilar down the CO2 tube before you use it. Think that will be enough 🤔
@@runerebel8441 I never knew that, untill I hear ppl talk about it on other channels, I guess I'll have to do that because I don't want all my 4 launcher seals drying, It seams that my silicone blaster foams and it expands so I was hoping it would hit the internal seals without having to shoot it after spraying some down barrel!
@@JayJone5169 The most I have left my markers with no use is ca 3 years, and it still worked fine. So hard to say for sure how the O-rings will behave... That was a Tiberius T8.1 btw. So I guess the seals on that pistol is hi quality...
@@runerebel8441 ok yea I completely understand now after looking at hdp 50 valve, they sealed so it's good to shoot it with oil to keep it lube every once in a while, silicone blaster only will get externals, thanks for your help, I know more on how to maintain them now!
i wish i had your hdr and seans hdr , he is shooting a lot less than you are ! . i would have to make a very educated and high phuckin guess , i got over 4 decades of modding exp. , so here goes , maybe its because you use way more silicone oil than he does , and it is 75 degrees F in your house at the time of shooting ? . oil makes a big big difference , i keep telling people that . ! come on and join me my awesome brother , lets us 3 solve this equation !!!
@@runerebel8441 its a mystery for sure lol !!! could also be different co2 , one crosman , one umarex . that why i am so anal about duplication in my scientific research , to measure and weigh and record in note books for future references !!!
Thanks 👍 Rune for showing how to make a restrictor!!
Thanks my friend. Iam glad you like the video 😃
Rune these are a very good batch of slugs! You are a fine craftsman!!
Thank you my friend 😃
Thank you very much for shout out.
Nice video again my friend Rune ❤👍🏻🇨🇾
Thank you my friend. Iam glad to give you a shout-out 😃😃
Very nice video Rune!
Thank you my friend 😃
Hi Rune great video great slugs 😀👍🏴🇧🇻
Thank you Craig 😃
Now i am going to have to try. 🙂
🇨🇾👍🏻❤️
Looking forward to your videos Sean 😃👍
Probably tomorrow i will put my plastic barrel in my room and i will start make videos.
The humid its almost 80%
outside and i can't breathe.
The night also humid but no sun but i can't make video outside.
Good luck my friend. Looking forward to your videos 😃
Rune, did you fill the silencer with sound deadener cloth? I filled mine with abrasive pad wrapped around central vented guide and it works fine.
Hi. I made baffles of the foam. The silencer works fine on my HDP50, but not so great on the HDR50. I guess its because of the gap between the cylinder and barrel/frame.
is it good combo to put powerkit and take valve block off? opinion to take out valve block?any negative sides with that? Thanks!
Hi. The valveblock can be removed if you put in a restrictor in the CO2 tube. If you dont use a restrictor the revolver will fart and dump out all the CO2 in just one or two shots. Downside with removing the valveblock is you use a lot more CO2, but you get much more power.
What do you think about the suppressor, does it work?..does it reduce the noise?
The suppressor works great on my HDP50. Much lower sound/noise when I use it. But it dont dampen the sound much when I use it on the HDR50. Its because of the gap between the cylinder and barrel/frame.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks my friend 😃
👍, I wonder if I shot my gun like 30 times, and put it away for years, would I have to shoot it with Pell gun oil every one in a while to keep seals from dry rotting, or put silicone blaster down the barrel a few times a year if I don't shoot it, will silicone blaster spray seep in internal parts, or will seals be fine using nothin if stored in cool place?
Hi. All types of airguns/paintball marker etc need to be used, or the seals will fail. I recommend you use it at least once every 6 months or so. Put some silicone spray or simmilar down the CO2 tube before you use it. Think that will be enough 🤔
@@runerebel8441 I never knew that, untill I hear ppl talk about it on other channels, I guess I'll have to do that because I don't want all my 4 launcher seals drying, It seams that my silicone blaster foams and it expands so I was hoping it would hit the internal seals without having to shoot it after spraying some down barrel!
@@JayJone5169 The most I have left my markers with no use is ca 3 years, and it still worked fine. So hard to say for sure how the O-rings will behave... That was a Tiberius T8.1 btw. So I guess the seals on that pistol is hi quality...
@@runerebel8441 ok yea I completely understand now after looking at hdp 50 valve, they sealed so it's good to shoot it with oil to keep it lube every once in a while, silicone blaster only will get externals, thanks for your help, I know more on how to maintain them now!
@@JayJone5169 Iam glad to help. Take care and have a nice day 😃
i wish i had your hdr and seans hdr , he is shooting a lot less than you are ! . i would have to make a very educated and high phuckin guess , i got over 4 decades of modding exp. , so here goes , maybe its because you use way more silicone oil than he does , and it is 75 degrees F in your house at the time of shooting ? . oil makes a big big difference , i keep telling people that . !
come on and join me my awesome brother , lets us 3 solve this equation !!!
Hi brother. I guess temperature makes a big diffrence. There might also be diffrences in the stiffnes of the boltspring etc. Hard to say for sure 🤔
@@runerebel8441 its a mystery for sure lol !!!
could also be different co2 , one crosman , one umarex . that why i am so anal about duplication in my scientific research , to measure and weigh and record in note books for future references !!!
@@rick31869 Yes. CO2 brands can make a difference. Crosman CO2 is no longer sold here. Not sure why🤔
@@runerebel8441 strange , i wonder why , loosing that market area will impact their profits , maybe the extra taxes was over -bearing lol !!!
@@rick31869 Its strange. Guess the import cost is to high🤔