Very good! LEGO should have at least left some parts and extra instructions for HOG option, but you’ve taken care of that and it’s very simple and works well! Keep it up! 👍
Hibátlan megoldás. Végre sikerült kijavítani a szett egyik legnagyobb hibáját. A váltó javítása is nagyon ötletes. Grat hozzájuk!! Hogy sikerült így az elsők között megszerezni ezt a szettet??
Köszönöm. Ugye az volt az alapállás, hogy juni 1-től lehet kapni boltban a németeknél és az osztrákoknál, a világ többi részén pedig azt hiszem augusztustól. Ehhez képest itt Angliában is kitolták a boltokba, úgy, hogy senki nem tudott róla. Cimborám napi látogató ott, úgyhogy felhívott csütörtökön, hogy kell-e? Megvette, pénteken meg kivonatoztam a tüdőmet, de meglett :-) Azóta a boltokban is elfogyott, nem is nagyon tudják, hogy lesz-e... Valószínüleg valaki rossz gombot nyomott az elején. :-) Legyen áldott a keze.
Akkor jól jártál. Én azt hallottam, hogy visszavonták a forgalmazását a váltó és egyéb hibák miatt. Gondolom ki akarják javítani. Itthon gyakorlatilag nem is jelentkezett még senki vele, hogy birtokolná. 1-2 csaló reklámozza sokkal olcsóbban az egyik hirdető oldalon persze telefonszám nélkül. Valszeg augusztusban lesz belőle valami.
If you noticed the rack was secured in my version. (a 9L axle sliding along with it trough the 5x7 frame on the front) Now that improves a lot in itself. Now both, the HOG and the steering wheel operates on a biger ratio than the original was. The steering wheel has 2 turns lock to lock, therefore some slack has to be there, but I'm sure it isn't more then it was on the original build. And it isn't that disturbing. I'm kinda keen on this subject. The original design was ruined by the unscured 13L rack. It had a lot of vertical movement. That was causing that slopy feeling on the wheel.
When I wrote "it isn't that disturbing" I meant that on the original model you have 180 degrees steering wheel movement. If let say you have 15 degrees of slack on it, that is annoying. On mine there is 720 degrees s.w. movement. If there is the same 15 degrees of slack that it isn't manifests in a same disturbing feeling. Hope you get the point. I wouldn't be as much offensive anyway as you thought. :-)
Thanks Nico. I'm still on the mission to find out what took almost 3 years for them to design on this set. I admit, the body is ok, but it isn't enough for me.
Attika ?.i already have collected the extra pieces.needed.i don't have the set yet.will get it for my bday 9 september.if it will arrive on time that is.and also.will this change any functions/performance the original build has?
Hi, first: Ignore my former reply, somehow I managed to take your question as it came on a different video. (the fixing double engagement problem) Sorry. So I did this modification after it was fully assembled and I assume you should do it too. It's not a big deal to take apart the related assembly and this way you can experience how it is before and after. It's been a long time when I've done this but as much as I remember the only change in performance/ function is that the steering wheel gets more realistic ratio. That means it makes more rotation from lock to lock.
Attika also now I watched ur fix the double engagement video.if I would change the position of the red brick u showed.it will still work the same but less "laggy"?
Very good! LEGO should have at least left some parts and extra instructions for HOG option, but you’ve taken care of that and it’s very simple and works well! Keep it up! 👍
Pretty nice solution. Thank you!
Great improvement :D
And I'm sure it isn't the last... ;-)
Hibátlan megoldás. Végre sikerült kijavítani a szett egyik legnagyobb hibáját. A váltó javítása is nagyon ötletes. Grat hozzájuk!! Hogy sikerült így az elsők között megszerezni ezt a szettet??
Köszönöm.
Ugye az volt az alapállás, hogy juni 1-től lehet kapni boltban a németeknél és az osztrákoknál, a világ többi részén pedig azt hiszem augusztustól. Ehhez képest itt Angliában is kitolták a boltokba, úgy, hogy senki nem tudott róla. Cimborám napi látogató ott, úgyhogy felhívott csütörtökön, hogy kell-e? Megvette, pénteken meg kivonatoztam a tüdőmet, de meglett :-) Azóta a boltokban is elfogyott, nem is nagyon tudják, hogy lesz-e... Valószínüleg valaki rossz gombot nyomott az elején. :-) Legyen áldott a keze.
Akkor jól jártál. Én azt hallottam, hogy visszavonták a forgalmazását a váltó és egyéb hibák miatt. Gondolom ki akarják javítani. Itthon gyakorlatilag nem is jelentkezett még senki vele, hogy birtokolná. 1-2 csaló reklámozza sokkal olcsóbban az egyik hirdető oldalon persze telefonszám nélkül. Valszeg augusztusban lesz belőle valami.
I don't understand why Lego didn't do that to start with. Also how much slack is there in the steering that you added? =)
If you noticed the rack was secured in my version. (a 9L axle sliding along with it trough the 5x7 frame on the front) Now that improves a lot in itself. Now both, the HOG and the steering wheel operates on a biger ratio than the original was. The steering wheel has 2 turns lock to lock, therefore some slack has to be there, but I'm sure it isn't more then it was on the original build. And it isn't that disturbing. I'm kinda keen on this subject. The original design was ruined by the unscured 13L rack. It had a lot of vertical movement. That was causing that slopy feeling on the wheel.
Thank you. :) I understand now and btw werent hating i were just being curious ;)
When I wrote "it isn't that disturbing" I meant that on the original model you have 180 degrees steering wheel movement. If let say you have 15 degrees of slack on it, that is annoying. On mine there is 720 degrees s.w. movement. If there is the same 15 degrees of slack that it isn't manifests in a same disturbing feeling. Hope you get the point. I wouldn't be as much offensive anyway as you thought. :-)
:)
Attika're awesome!
Nothing, compare to you Baby... :-)))) Thanks
Ebben a percben pakoltam bele a sajátomba. A gyárit össze sem rakom, úgy is szét kéne szedni a MOD-okhoz. Köszi a videót! :)
Balo Nagyon szivesen. jó szórakozást!
Nice ! Why lego didn't do that, that is simple and obvious !
Thanks Nico. I'm still on the mission to find out what took almost 3 years for them to design on this set. I admit, the body is ok, but it isn't enough for me.
cool :D
so i should do this after getting done with the first box ?
You should do it when you et to these parts. And you just insert them the other way around.
Attika ?.i already have collected the extra pieces.needed.i don't have the set yet.will get it for my bday 9 september.if it will arrive on time that is.and also.will this change any functions/performance the original build has?
Hi, first: Ignore my former reply, somehow I managed to take your question as it came on a different video. (the fixing double engagement problem) Sorry.
So I did this modification after it was fully assembled and I assume you should do it too. It's not a big deal to take apart the related assembly and this way you can experience how it is before and after. It's been a long time when I've done this but as much as I remember the only change in performance/ function is that the steering wheel gets more realistic ratio. That means it makes more rotation from lock to lock.
Attika ok thx
Attika also now I watched ur fix the double engagement video.if I would change the position of the red brick u showed.it will still work the same but less "laggy"?
Are you Crowkillers on Brickshelf? Or did you adopt the term Hand Of God steering?
:-D The term "hand of god steering" is commonly used in the Lego community. It isn't Crowkiller's own invention.
This would of been useful if I hadn't finished building it