For those who have trouble with the non blinking light (lift the top where the k cup goes and there should be a black little circle button. Gently remove it and place it back in and it should begin to blink) hope this works😊
FIXED DO THIS I had this problem because there was air in the line so the pump couldn't prime. I solved my issue by filling the reservoir about 1/4 full and placing it back on the machine. Then I basically lifted the reservoir up and down rapidly and saw little air bubbles coming up from the place where the water intake is in the bottom. I did this until the air bubbles stopped appearing. It creates some sort of vacuum inside the machine I think and gets the air out of the line so the pump can prime. Anyway, I then filled up the reservoir with water and turned the machine on. It finally sucked water into the internal tank much to my relief. I've read other people have had similar issues after having put their machine in storage while moving. No one tells you how they fix it though. Just thought I would share my fix-it to try in case it can help someone else. Best of luck!
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
good 🌄 Kim, thank u for the comment I just read, my husband just bought the Keurig and I had also the problem with the rubber stoppers also, but after reading your comment, it finally works great, so thank u. 😊 😊
This is our second K-Classic. We had our first one for many years, so when we had to replace it, we wanted nothing else but this exact ua-cam.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf model. We use it for about three people everyday in the morning. The taste and quick brew is one of the reasons we like it so much. There are so many choices of brands of coffee that we would grab what was on sale and test the different brands from there. I would definitely recommend trying different brands of coffee to find the ones you like the most because there are brands that quite frankly taste horrible.
I unplugged it for a minute, plugged it back in. The lights still won't flash. The lights come on, but they just stay on. The only way I can successfully brew a cup of coffee is by holding the 10 and 6 down at the same time. Then, the 8 flashes and I can push that. But it says it's descaling. 😂
Mine is brand new out the box. I've tried everything you said and it will not brew a cup of coffee. All the lights light up, cleaned the tank and have it 3/4 way full. K cup in place correctly, lid is down flush. Nothing happens. I pushed the 6,8,10 oz buttons and nothing worked.
@@anamartinez-tc7fd Got one today and had the same problem, fixed it though. While plugged in, press 10z and 6oz at the same time. Descaling will begin. Make sure water is filled to the max and keep brewing 8oz until the descaling light is off. This will mean you might go through two whole rounds of the water reservoir- so 8 cups of 8oz until mine turned off. After, slowly lift the handle at the top and wait for your lights to turn on and to blink- after, insert your kcup and boom
I've had a few and I always fix it the same way. Try this and see if it works. Unplug it, take out your water reservoir. You probably don't have to but I always remove the water as well. Then press the little rubber piece where the water enters the machine until all of it comes out, and dry it with a towel. Replace the reservoir, add the water and plug the power back in. See if this works when you brew; if not do this 1-2 more times. I've done this and it always works, but you could have a different issue.
Thank you thank you thank you. doing that made it work. We tried everything prior to seeing this video that the video said to do. You're the best. My fife was frustrated with it and we just got it.
What I found that works is trying to remove all the water from both the tank and the little spot under the tank and the machine did that after washing and rinsing out the tank shoved the corner of a bar towel in to get the water out just so the right amount of water is fed into the machine for the right size of coffee try it and see if you want
If you've tried all the previous steps and suspect there may be an issue with the water reservoir, you can try filling it halfway, placing it on the machine, and then gently lifting it up and down for about 39 seconds to release any trapped air bubbles.
Sorriest coffee makers ever. This is my third one. The first one was okay but this model is junk. So sensitive you always having to do something to keep it going. Thanks for the video.
Hey guys what worked for me is taking the whole water tank and gently pulsing it up and down. It releases air from the line. I did it before i tried to brew and during the brew. Then i took the back of the tank off and pulsed the thing at the bottom where it draws the water. It worked for me
Mine turns on, all the buttons flash but when I select any of the cup functions it shuts off, never brews. And yes there’s a k-cup in it, I cleaned the needles, and there’s enough water. Any ideas?
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
My machine ( second one) after receiving a new one. Water won't heat up and macine dispenses for a few seconds then turns off... I've tried all your suggestions and nothing happened i did the descaling as ive done once before months ago but now machine turns off before i can even get to that part...any suggestions from anyone will help
Not helpful to my problem. Your video is about very simple problems with your solutions repeated 3 or 4 times. I completed descaling and all lights are off. Now when I touch the power button, the 6, 8, and 10 oz buttons all flash 3 times and the machine powers off. I can press the 6 and 8 oz and do he descaling all over again, but the same power up problem exists. A solution t this would be very
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
Thanks for your help! Love your energy and passion 😊❤. Unfortunately, this did not solve my problem but I still appreciate that this is available for troubleshooting!!
Bought one brand new when you put the cup in and close the lid the three lights for selecting the ounces won’t flash they just stay lit up this product is junk Took it back. Got a refund.
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
Been reading the comments on this model…it appears everyone calls these models absolute trash…and I would have to agree. I haven’t been able to make it work one time. One random day I saw the lights flashing as if I turned it on and wanted coffee in that instance (I had just got home from work) it was so random….ever since then it never works when I want it to. And besides…if I have to finagle this machine every time I want a cup of coffee like the way this video is showing, then that just shows me what an absolute pos product this is. Going to the store for a refund. So disappointed, other Keurigs I’ve used in past years in a work setting or at friends houses always work flawlessly. I don’t understand what’s the issue with this model.
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
Did not help at all.
I could not take the guy yelling during the entire video!!
Me neither 😢
😂😂😂
Me neither
For those who have trouble with the non blinking light (lift the top where the k cup goes and there should be a black little circle button. Gently remove it and place it back in and it should begin to blink) hope this works😊
Literally just had this exact same issue and found the resolution on reddit. Just pressed it with a chop stick and it popped up.
This worked, thank you so much
This trick definitely works...thank you
That worked ! You’re the genius here❤
I bought my wife a brand new one for Christmas, not working. I'll try the tricks that were mentioned & am sure it'll work, thank you!
FIXED DO THIS
I had this problem because there was air in the line so the pump couldn't prime. I solved my issue by filling the reservoir about 1/4 full and placing it back on the machine. Then I basically lifted the reservoir up and down rapidly and saw little air bubbles coming up from the place where the water intake is in the bottom. I did this until the air bubbles stopped appearing. It creates some sort of vacuum inside the machine I think and gets the air out of the line so the pump can prime. Anyway, I then filled up the reservoir with water and turned the machine on. It finally sucked water into the internal tank much to my relief. I've read other people have had similar issues after having put their machine in storage while moving. No one tells you how they fix it though. Just thought I would share my fix-it to try in case it can help someone else. Best of luck!
THANKYOU
This worked for me 🙌 Thanks!
Lifting the reservoir up and down rapidly about 5+ times got my brewer back work ‼️🙌🏾🙌🏾🤪
u are the goat jaden!!
THANK YOU SO MUCH !!!!
You talk to damn much yet say nothing
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
i just Bought mine Yesterday and i'm having the same problem the 3 lights are on e but they wont blink or brew anything
good 🌄 Kim, thank u for the comment I just read, my husband just bought the Keurig and I had also the problem with the rubber stoppers also, but after reading your comment, it finally works great, so thank u. 😊 😊
Thank u so much , this is why i real the comments !!! I World of never thought to try that !! Thank u , thank u !!
This worked for me! Plus the air bubbles trick from the earlier comment
thanks this worked for me !!!
Bro just screaming the whole time and didn't help at all
This is our second K-Classic. We had our first one for many years, so when we had to replace it, we wanted nothing else but this exact ua-cam.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf model. We use it for about three people everyday in the morning. The taste and quick brew is one of the reasons we like it so much. There are so many choices of brands of coffee that we would grab what was on sale and test the different brands from there. I would definitely recommend trying different brands of coffee to find the ones you like the most because there are brands that quite frankly taste horrible.
Thank goodness for closed captions. Listening after about a minute is a bit irritating
Guys hold down the 10 and 6 oz and same time it’ll start blinking but make sure the machine is off
Thankssssssssss
So, I held down the 10 and 6 and descale. How do I take it off descale?
I unplugged it for a minute, plugged it back in. The lights still won't flash. The lights come on, but they just stay on. The only way I can successfully brew a cup of coffee is by holding the 10 and 6 down at the same time. Then, the 8 flashes and I can push that. But it says it's descaling. 😂
Hella genius . Worked right away
Thank you
My problem was a dirty needle. Worked perfectly after that!
I am posting my review today. I am thoroughly convinced that this is a faulty model. Wish I had known before throwing it out 😆Thanks for sharing.
Mine is brand new out the box. I've tried everything you said and it will not brew a cup of coffee. All the lights light up, cleaned the tank and have it 3/4 way full. K cup in place correctly, lid is down flush. Nothing happens. I pushed the 6,8,10 oz buttons and nothing worked.
having the same problem. did you figure it out?
Having the same problem
@@trizneyajohnson1466literally having the same problem right now . just bought it yesterday
@@anamartinez-tc7fd
Got one today and had the same problem, fixed it though.
While plugged in, press 10z and 6oz at the same time. Descaling will begin. Make sure water is filled to the max and keep brewing 8oz until the descaling light is off. This will mean you might go through two whole rounds of the water reservoir- so 8 cups of 8oz until mine turned off.
After, slowly lift the handle at the top and wait for your lights to turn on and to blink- after, insert your kcup and boom
@@sleepyless6795Thank you sooooooo much. This did it!!!
I've had a few and I always fix it the same way. Try this and see if it works. Unplug it, take out your water reservoir. You probably don't have to but I always remove the water as well. Then press the little rubber piece where the water enters the machine until all of it comes out, and dry it with a towel. Replace the reservoir, add the water and plug the power back in. See if this works when you brew; if not do this 1-2 more times. I've done this and it always works, but you could have a different issue.
Lots of energy my friend..... Thanks a lot,will try all 7 tips 😊
Worked! Unplugged it and waited a minute. Plugged it again and it’s working.
I have an identical machine and had the same issue. Unplugging and plugging back in worked for me.
...made an couple cups and stopped working again...
Thank you thank you thank you. doing that made it work. We tried everything prior to seeing this video that the video said to do. You're the best. My fife was frustrated with it and we just got it.
That's in a whole different video?! That's why I'm watching this damn thing
If you call keurig and let them know you’re having this issue they’ll send you a new one if your machine is still in warranty.
I get a short lunch break I just want a cup of coffee this is taking too long I could have gone to the coffee shop and back by now
The reservoir redo worked! Thanks very much!
What I found that works is trying to remove all the water from both the tank and the little spot under the tank and the machine did that after washing and rinsing out the tank shoved the corner of a bar towel in to get the water out just so the right amount of water is fed into the machine for the right size of coffee try it and see if you want
What is you have no blinking lights or doesn’t light up at all anymore? It just stopped working today
Wow the suggestions 2 and 3 are fantastic 😂
If you've tried all the previous steps and suspect there may be an issue with the water reservoir, you can try filling it halfway, placing it on the machine, and then gently lifting it up and down for about 39 seconds to release any trapped air bubbles.
Mine wasn’t brewing. I dumped the water out and put fresh one in and it fixed it. Thanks for the tips.
Thank you. That worked for me.
Sorriest coffee makers ever. This is my third one. The first one was okay but this model is junk. So sensitive you always having to do something to keep it going. Thanks for the video.
Hey guys what worked for me is taking the whole water tank and gently pulsing it up and down. It releases air from the line. I did it before i tried to brew and during the brew. Then i took the back of the tank off and pulsed the thing at the bottom where it draws the water. It worked for me
Good morning can you help me out? Mine does not turn on. It’s the same one on the video.
If Badger from Breaking Bad sobered up and created a DIY video abiut fixing your Keurig.
Mine turns on, all the buttons flash but when I select any of the cup functions it shuts off, never brews. And yes there’s a k-cup in it, I cleaned the needles, and there’s enough water. Any ideas?
This is exactly what I'm experiencing and I've cleaned it and dumped water and descaled. I've done just about every hack.
@@bulbasaurcowboy same here I ended up buying a new one 😔
I've descaled and cleaned. Unplugged. When I close the lid, the buttons flash twice and go off. Any ideas?
@@roxannemoore8602that’s my problem right now. Did you find a solution?
Thanks I just fixed mine 😊
what if the buttons won’t flash?
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
Thank you for your help its working now😁😉
Ok I have a new machine new used, but my lights do not flash they just stay on the lights are not flashing??
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
My machine ( second one) after receiving a new one.
Water won't heat up and macine dispenses for a few seconds then turns off... I've tried all your suggestions and nothing happened i did the descaling as ive done once before months ago but now machine turns off before i can even get to that part...any suggestions from anyone will help
ugh... i give up. I descaled first.. it worked great. Next day it wouldn't pump water. I tried all your suggestions, but didn't help.
Mine smoked and no lights at all isk what to do was gifted it from my family cus i just had a baby and its been a lifesaver i need to fix it
Had to create an account just to down vote this video
Okay this was useless
Why are you screaming.....we are already frustrated because our expensive coffee maker doesn't work....give us a break!
My coffee is not tasting as fresh as it usually does!! I guess I need to de-scale it every few months??
I think the lid is broken on mine
What I noticed was mine wouldn’t work if I used the cold water from the refrigerator.. I have to use room temp water
Why is he yelling. It’s giving me anxiety. And he’s acting like we don’t know how to make coffee. Unfollow after 4:38
You're still telling me and still no answer for why I have coffee grounds in my cup after one month.
Not helpful to my problem. Your video is about very simple problems with your solutions repeated 3 or 4 times. I completed descaling and all lights are off. Now when I touch the power button, the 6, 8, and 10 oz buttons all flash 3 times and the machine powers off. I can press the 6 and 8 oz and do he descaling all over again, but the same power up problem exists. A solution t this would be very
This is exactly my problem, have you found a fix yet?
I have the same thing, did you find a solution?@@leticiachamblin1836
My machine will not show any lights like it don't have power
Jeez
This seems silly but in the beginning you sound like Glenn Sturgis and then a mix of Glenn and Saul Goodman.
When i plug mine in an i hit 8 oune it lights up but not blinking. I cant brew
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
Thanks for your help! Love your energy and passion 😊❤. Unfortunately, this did not solve my problem but I still appreciate that this is available for troubleshooting!!
None of my buttons work except for the flower
This guy sounds like Charlie Day a little bit. It worked after I cleaned out the water thing.
I try doing this and sit don't work 😮
Dude you might want to switch to decaf. Just a suggestion
My lights will not flash no matter how many k cups Ive put in. I think I got a dud.
Just had a mayor issues with this model worst keurig. The the k express works way better. I had that like 5 years
Not helpful. Mine is literally stops working. Power won’t turn on.
It's trickling dude literally everybody here is here because their machine is trickling
Unplug and plug again video. Reminds me of Bo-Bo the Clown
Don't have to have a k cup in at all. 😂 imagine looking on youtube for help without checking if it had water first
3 cups and now it won’t pump water. Junk
Bro sounds like Saul Goodman
23 seconds in, nope...
Tried all this nonsense. Nothing. Take it apart and turn the keurig upside down and get the water out the bottom
With the tips you give you should change the title to trouble shooting not fix.
Why is dude screaming?
Bought one brand new when you put the cup in and close the lid the three lights for selecting the ounces won’t flash they just stay lit up this product is junk Took it back. Got a refund.
Mine too
Same with mine. Been to several videos and I’ve got absolutely nothing so far.
Same
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
Been reading the comments on this model…it appears everyone calls these models absolute trash…and I would have to agree. I haven’t been able to make it work one time.
One random day I saw the lights flashing as if I turned it on and wanted coffee in that instance (I had just got home from work) it was so random….ever since then it never works when I want it to. And besides…if I have to finagle this machine every time I want a cup of coffee like the way this video is showing, then that just shows me what an absolute pos product this is. Going to the store for a refund. So disappointed, other Keurigs I’ve used in past years in a work setting or at friends houses always work flawlessly. I don’t understand what’s the issue with this model.
If your lights are on solid and not blinking try this. When you open the lid for the k-Cup there is a little rubber button on the right side towards the back. Fiddle around with it a little as it needs to pop up to activate the brewer. I did this a couple of times and now the machine works great.
It’s not even two months old I last descaled three weeks ago and won’t brew never buy from this company again
DONT WASTE YOUR TIME!!!🤦🏻🤬
I think this guy needs to switch to decaf!
Holy crap, he sounds like Sam Kinnison! AAHHH!!! AAAHHHH!!!!
Always say’s add water even when full. Junk
This video is a complete waste of time
Same here, not helpful at all.
Why is this dude? Screaming during his entire video?? I had to stop after 3 minutes.
Right!? I just started skipping ahead hoping the video would get useful at some point but now I'm leaving more annoyed then when I started. Awful
🙄🤦🏻♂️👎👎
This guy's sounds a bit like Brennan Lee Mulligan
Your super loud
Worst. Intro. Of. All. Time.
Did not help at all you didn’t even even have a broken machine and trying to diagnose someone else’s issue you have no freaking clue
Not one bit of good Information but common sense.
Now to find a video that shows how to really fix these pieces of junk
They should ban you from UA-cam
Maybe he's hard of hearing don't have to listen
To give instructions you don’t have to yell so much. Your yelling hinders your message
did not help at all goddamn
Ugh you sound like Bill Gates. 😵
This video was no help whatsoever
Waste of time
Wow, not helpful at all
Seriously, a waste of my time! Thumbs down 👎🏼
Why do you sound like your talking to children.
why do you talk like that?
No waist of time on this video.
Would u talk freaking normal
Why are you yelling?
He’s just animated, if he spoke in monotone people might not pay attention
Thanks for wasting my time
Didnt help plus you are extremely loud and repetitive
None of what you said works 🫠