CHADWICK Car Horn Siren Alarm【Installation manual 】

Amz link:
luwb.cn/2Jnj6
------------------------------------------------------------------
------------------------------------------------------------------
Non-Destructive installationCAR ALARM SYSTEMSpecification:1. Press the “ lock ”button, the siren sounds once, then enter theanti-theft state in 5 seconds. If it is triggered by vibration, itwill be sound for 5 seconds. If it is triggered in 3 seconds again,sounds for 30 seconds with 6 tones circulated.2. Press the “unlock” button, the siren sounds twice, the unit disarm.3.Car search function: Press “mute” or “bell” button, the siren sounds30 seconds. Press any button to stop. No "mute" or "bell "button no functions.4.Sensitivity adjustment: It has 7 levels, the 7th is the highestsensitivity, and the 1st is the lowest sensitivity. Default is the 4th.a. Increase sensitivity: Press the “lock”&“unlock” button for 3 secondsat the same time. If the siren sounds 4 times, it means that isthe 4th gear. Press “lock” button once, the sensitivity increasesone gear, that is the 5th gear, the siren sounds 5 sounds.By analogy, If the siren sounds 7 times, the sensitivity is 7th gear.(Caution the 7th is high and easy to report falsely). After confirmingthe required gear, do not operate the button for 5 seconds or press“ lock”&“unlock” button for 3 seconds at the same time, and the sirenwill sound 3 times to exit the sensitivity adjustment mode.b. Reduce sensitivity: Press “lock”&“unlock” for 3 seconds at the sametime. If the siren sounds 4 times, it means the current gear is the4th. When press the “ unlock ” button once, the sensitivity is reducedby one gear, then the siren sounds 3 times, and then press “ unlock”button again, the sensitivity is reduced to 2nd gear.The 1st gear is the lowest gear. After confirming the required gear,do not operate the button for 5 seconds or press “lock ”&“unlock” buttonfor 3 seconds at the same time, and the siren will sound 3 times toexit the sensitivity adjustment mode.5.Learning code: Method 1: Press the learning code switch on themain unit inside, press any button on the remote, the siren willsound once, indicating that the learning code is successful, andthe second remote learn code as first one.Method 2: Continuously touch the power/battery for 5 times.After the siren sounds, press any button on the remote, the sirensounds 3 times, the code is learned successfully. It can learn upto 2 remotes and the first remote automatically clears after thethird remote was code learned.Specification:Main unit:Working voltage: DC 12 ±3VStatic current:10 mASiren: 10AWorking frequency: 433.92MHZRemote control:Working voltage: DC 12VAverage static current:0 mABattery:6V CR2016*2About installation:The product need installed by the Profesionales with Car electrician certificated OR by oneselfFor 12V DC carThe item without central door lock functonsPackage Include:1x Main Control Unit2x Remote Control1x English User Manual