Very interesting! I will have to try this myself. Been using the same rubber for 5 years (on & off) and it's smooth as a baby's butt 👶🏽 (newbie here). I like chopping on both FH & BH Thanks for the upload!
Is it advisable making two separate glue surface treatment? That is, waiting the first treatment dry then make a second one. I read someone doing this thing with porous rubbers like tibhar evolution or tenergy. The first glue treatment makes the glue penetrate pores, the second creates the surface layer. Is it recommended?
Alex Skyer I used to do that when using speed glue, sometimes even doing 3 layers. I'm not too sure if more layers of water based glue affects the performance of high tension rubbers nowadays. Speed glue was made for older rubbers without tensor technology, however, since the ban of speed glue and the introduction of tensor rubbers, personally I think there's not need to apply multiple layers of glue anymore, as that's what tensor technology does.
I glued a Donic Bluefire M1 for a friend and I had to use two layers on the rubber, because the sponge was too porous. The first layer was almost completely absorbed by the sponge.
I need a help? Which rubber is better for me I am an attacker and I need more power than spin..... Tell in tenergy series as I am currently using 64 and 80.....
K yes. The most important thing is to do it at a medium speed. Not too fast and not too slow. It also depends on the brand of the rubber. Some sponges are harder or softer than others, causing it more likely to tear.
I need your help here, I bought a very common and recommended blade(Yinhe N9s) with (Mercury 2 Medium) rubber. when I played with it the four hand is very powerful and has a very good control, but the backhand is very bad, I could do anything basically, the ball just fly a way if I receive any spin . is the problem from the blade or from the rubber. thank you so much.
Comacho Comacho unless the blade is really poor quality then it’s the problem of the rubber. Blades are made with uniformity on either sides, but it is rare to have the same rubber on both sides.
As you can see in the video just one on both the rubber and the blade. There isn't much point in using multiple layers of water based glue. Only use multiple layers for speed glue.
Hello, I have an issue where the red rubber is coming away from the yellow sponge. would taking the red up and applying glue to the yellow work? or would I need to buy a whole new red rubber and yellow sponge? any help would be much appreciated
Nice stuff man. But i noticed one thing. Blade made the sponge bleed a little from the edges. I face the same problem. Is there any blade out there that goes through rubber n sponge like knife through butter?
schneiderss thank you for your comment. Actually I intentionally made it like that so if I do hit it against the table it won’t damage the blade but instead the rubber.
Hi, is there a reason you use black rubber T05 for forehand because I see a lot of paddles with red T05 for forehand glued to the side of the paddle where is description of paddle, name model serial etc... Probably it doesn't matter which side of paddle is used for FH and BH.
Dapper Fob they make it square because every blade has a different size, so if they make it round, it might not be big enough to fit some of the blades.
@@shingoukiex Is there any sealant you would recommend? Also, why do you cut two times, don't you get different angles for the cut of the sponge/rubber?
Florin Carata I have yet to use it myself. Actually I would like a good recommendation from someone as well. Cutting it twice ensures that the rubber or sponge won’t be damaged. The first cut cuts through the sponge only, and the second cut is through the rubber.
shingoukiex I have the same setup but the scalpel’s blade is smaller and it cuts very easily . One pass without much pressure and it’s done. I am satisfied with the result, but next time I will be looking at other blades.
hey friend can I change the rubber from a wakaba 2000, I dont know because i bought it on a store and I dont want to make shit my paddle please answer me thanks.
Nice and neat job. I'd think that hot hair drier would be good after the adhesion has been done, but then you can't heat the rubber side, it would damage it... So what do I know...
Not really. You let the adhesive go transparent before putting it together and it sticks very quickly, the drier is just to speed up that process. You can just leave it until it goes transparent
Santi Torres hello. Even if the pair of scissors are Sharon u still won't get a perfect clean cut because every time you stop to change the angle of the scissors you will get more or less an edge sticking out.
_ RulesTV no, T05 has a slightly harder rubber so it's more suited for the forehand. T64 is for the backhand, it has more control on passive plays like backhand blocks or punch shots.
albert lopez No damage. I take a lot of care when changing rubbers especially when peeling. I change rubbers roughly once a year. Recently I've switched to Xiom rubbers because T series is too over priced for me to keep using on a yearly basis. Please watch the newest demonstration of my on gluing new rubbers! Thank for for your comment.
@@shingoukiex I play with Xiom Omega VII Tour max on forehand and Tibhar Evolution Mx-s max on backhand on Tibhar Fortino Pro blade. Is it good setup? I am wondering if the mx-p on backhand would be better. Thanks
Thanks for the video, I've never changed a rubber before but I was thinking on using a scalpel too, I've seen how rubbers look when they are cutted with scissors and that's just ugly.
If i buy rubbers online from this website www.megaspin.net/store/default.asp?pid=sanwei-ap-lightwei will i have to put in 2 orders or does the shipment contain 2 rubbers already?
man that cutting is clean, love how the smoothness ended up
This could become an ASMR trend
Teh CornerThief nice suggestion lol
I didn't get or like asmr until this video. This is my exception.
That was the best rubber gluing I have watched it was great!
Daniel Korn thanks. I’m glad you like it and hopefully it can be of help.
This is basically my racket with the colors revesed. Love It!
What do you dip the sponge in before you start to lubricate the rubber?
I don’t even own a ping pong paddle and I’m watching this
It's a sign
Those rubbers you changed , they looked like new :D
How often you change them ?
About once a year or two.
Are you showing your desk or the paddle?
Make sure it is warm? Cold glues are HARDER to tear apart...? And Thank you... still looking to buy such a racket/bat for my boy.
Well myself i use the bat/racket he’s using which i think should be VISCARIA and could cost up to 200$
What kind of microphone does this guy have that you can hear an exact o knife cut rubber?
lol
Can i know... what kind of sponge you used for apply glue to blade and rubber
I think the butterfly sponge, or Nittaku.
What are you doing with the brush on the tissue (4:40)? Btw, nice video...
Fjr afi To make the sponge a little bit wet. It makes it a bit easier.
Fjr afi what is the liqid by which you make the sponge wet and how much does this padle cost i mean the wood and the rubber cost
mohammed asi I just used water. The blade is about 150 USD and rubbers are 70 per sheet.
shingoukiex thanks alot in iraq we have cheaper wood and sheet but they are not as good as yours
That is Viscaria right? 150 USD for that blade? Wow.. Here in Indonesia it's price about 97 USD
Very interesting! I will have to try this myself. Been using the same rubber for 5 years (on & off) and it's smooth as a baby's butt 👶🏽 (newbie here).
I like chopping on both FH & BH
Thanks for the upload!
You’re welcome thanks for your comment.
what glue should I use?
Ognjen Jokicic any water based
@@maksf3102 what on earth name is that
Hello Shingou.. could you tell me few brand names for anti spin, small pimples and normal rubbers please?
themaestromusician Sorry. I’m not too familiar with these types of rubbers.
Is it advisable making two separate glue surface treatment? That is, waiting the first treatment dry then make a second one. I read someone doing this thing with porous rubbers like tibhar evolution or tenergy. The first glue treatment makes the glue penetrate pores, the second creates the surface layer. Is it recommended?
Alex Skyer I used to do that when using speed glue, sometimes even doing 3 layers. I'm not too sure if more layers of water based glue affects the performance of high tension rubbers nowadays. Speed glue was made for older rubbers without tensor technology, however, since the ban of speed glue and the introduction of tensor rubbers, personally I think there's not need to apply multiple layers of glue anymore, as that's what tensor technology does.
I get it. Thank you so much for your timely answer!
Alex Skyer you are quite welcome
I glued a Donic Bluefire M1 for a friend and I had to use two layers on the rubber, because the sponge was too porous. The first layer was almost completely absorbed by the sponge.
Hi and thanks a lot from France. Did You put some surfazer before or glue directly?
Philippe Masia Hi. I just glued directly I wish I had something to put on before gluing.
I need a help?
Which rubber is better for me I am an attacker and I need more power than spin.....
Tell in tenergy series as I am currently using 64 and 80.....
80 is fine. It’s a good balance of speed and spin. Alternatively you can use 64 on your forehand as well.
Do the butterfly packets come with 1 rubber for 1 side or 2 ?
Just one
@@shingoukiex thank you,
How soon can you play, after replacing rubber?
Maria Dalee I can play right away if you want, but I usually put it under some heavy books for 1 night.
What type of glue that u are using?
What are the things needed ???
Sowmiya Ganesh Sowmiya watch my other videos there are captions
Almost every time I change my rubber the sponge rips or tears 😭 is there any way to avoid damage when taking of the rubber so I can reuse it?
K yes. The most important thing is to do it at a medium speed. Not too fast and not too slow. It also depends on the brand of the rubber. Some sponges are harder or softer than others, causing it more likely to tear.
shingoukiex thanks! Also, is there anything different about glueing and removing long pips?
acétone
I am from India can you tell me which glue I should use to stick my rubber
Elmer’s
I just bought a dunlop revolution 7000 racket, im not a pro just amatuer. Do you reckon its good racket
I’ve never used it but depending on the combination of the wood it can be a good racket.
where can i find that glue and that small broom
Prajwol Prajapati I bought the glue on Amazon. The brush is a clip with a cylindrical sponge. Amazon also sells them.
What glue do you use?
nittaku fine zi p
But is it a simple phon for hair?
Where can I get that knife? It seems very solid and sharp.
Ben Fritz its a surgical knife.
shingoukiex There are knives like that for art.
jtrttnmvtvvn
I need your help here, I bought a very common and recommended blade(Yinhe N9s) with (Mercury 2 Medium) rubber. when I played with it the four hand is very powerful and has a very good control, but the backhand is very bad, I could do anything basically, the ball just fly a way if I receive any spin . is the problem from the blade or from the rubber. thank you so much.
Comacho Comacho unless the blade is really poor quality then it’s the problem of the rubber. Blades are made with uniformity on either sides, but it is rare to have the same rubber on both sides.
great video, thanks! for how long you use your blades before a need to replace them?
Mladen Momcilovic I use them for about a year before switching. After a year the rubber surface starts to fail to grip the ball well.
Excellent video! Can you provide the exact name of the glue applicator (cylindrical sponge) you bought on Amazon? Thx!
dsarrafi Hi. The applicator is called Butterfly clip sponge. It comes with a plastic clip and about 10 cylindrical sponges.
*shingoukiex* Thank you so much!
my rubber has a scratch should I change the rubber or buy a new racket
Florence Albano neither. A scratch on the rubber will rarely affect the performance.
shingoukiex are you sure its a 4 inches scratch and I have a competition next week
Shing was saying a scratched , just a small one . Use your commonsence .
I'm new to table tennis, how often should I change the rubber?
Hi. It depends on how much you play. If you play daily and take good care of it I'd way 1 year period is good.
how many layers did u put on the rubber and blade
As you can see in the video just one on both the rubber and the blade. There isn't much point in using multiple layers of water based glue. Only use multiple layers for speed glue.
Can you give those ones you changed?
hello Sir i would like to ask if your old rubber still can be use in my racket blade?
RODOLFO MERO probably. I keep my old rubbers and sometimes put them on other blades I have.
Hi...can i ask ? is that old rubbers usable when i pull them off ? can i bond it on other blade ?
Ondrej Páleník yes you can. However due to contact to the glue it might have shrunken in size.
@@shingoukiex ok, thank you so much 😊
Hello,
I have an issue where the red rubber is coming away from the yellow sponge.
would taking the red up and applying glue to the yellow work?
or would I need to buy a whole new red rubber and yellow sponge?
any help would be much appreciated
I think you have to buy a new one. Once the sponge separates from the rubber, then it's hard to fix.
why are you drying the glue?
After drying the glue sticks better.
05 and 64, best combination ever!!
Luiz Carvalho I think so too!
Agreed! I use these two on a boll forte blade, and love it!
Actually h3 and t80 is better
Also becuz of Viscaria
請問蝴蝶05跟蝴蝶80分別功能及強度為何?都反面嗎?聽過史迪卡(李曉霞拿的)的球板是?
賴明德 Stiga 145
Nice stuff man. But i noticed one thing. Blade made the sponge bleed a little from the edges. I face the same problem. Is there any blade out there that goes through rubber n sponge like knife through butter?
schneiderss thank you for your comment. Actually I intentionally made it like that so if I do hit it against the table it won’t damage the blade but instead the rubber.
Hi, is there a reason you use black rubber T05 for forehand because I see a lot of paddles with red T05 for forehand glued to the side of the paddle where is description of paddle, name model serial etc... Probably it doesn't matter which side of paddle is used for FH and BH.
Walter Bijeli Hi. It doesn’t matter which color you glue for forehand or backhand. It’s personal preference.
what's glue? and how long time you put old rubber on blade it's looks like so stick with blade?
jomtack kreanga glue used is nittaku finezip. I used the rubber for one year.
+shingoukiex yeah thanks I'm deciding free chack, nittaku fine zip, Andro turbo fix. I want so hard stick glue.
Perfectly done and satisfying to watch! I wanna know what kind of glue you applied to the blade and rubbers.
I used a Nittaku fine zip.
Isnt it a big waste of material ? why do they make the rubber square ? New to tennis table here
Dapper Fob they make it square because every blade has a different size, so if they make it round, it might not be big enough to fit some of the blades.
Oh right i get it
are you using Nittaku Fine zip.......
Robert Stop yes.
the best of the best ......Finezip
this is my new set up, can you tell me if teesports is a good place to but tt equipment
Wreckz Gaming very good place
Hey, what did you use to cut it?
You can use a scissor or razor blade. Looks like he used some form of scalpel/construction knife
What is the thing on the side of the blade u peeled off
It's a side tape that protects the edge of the blade from damage.
Ok thanks
Np
Nathz A rubber stupid
Lol
Thanks for your informative video. Would you use a sealant on a new blade prior to gluing on new rubbers?
Victor Y yes I would. It helps protect the blade!
@@shingoukiex Is there any sealant you would recommend? Also, why do you cut two times, don't you get different angles for the cut of the sponge/rubber?
Florin Carata I have yet to use it myself. Actually I would like a good recommendation from someone as well. Cutting it twice ensures that the rubber or sponge won’t be damaged. The first cut cuts through the sponge only, and the second cut is through the rubber.
shingoukiex I have the same setup but the scalpel’s blade is smaller and it cuts very easily . One pass without much pressure and it’s done. I am satisfied with the result, but next time I will be looking at other blades.
Florin Carata yea, the blade I’m using is just a surgical knife. It can cut in 1 go but I just want to make sure nothing breaks or rips.
Can i use donic viro clean..?
kartik sharma yes
kartik sharma yes
Does anyone now if the old rubbers can been use in other blade?
Probably not. Difficult to glue and they will be dead rubber
Expensive set up, i just can imagine to have it..
What bat you change the rubber
Can you use Elmer's Glue on this?
That was also my question.. someone mentioned that any water based glue is okay.. so my first thing that pops on my mind was elmers glue..
hey friend can I change the rubber from a wakaba 2000, I dont know because i bought it on a store and I dont want to make shit my paddle please answer me thanks.
J SG yes you can. Just be careful when removing the rubber.
Are you able to use it after
Yes. It's quite good.
Hello; Can I ask WHAT GLUE do you use, please?
Roger Dodger I used the nittaku finezip
Nice and neat job. I'd think that hot hair drier would be good after the adhesion has been done, but then you can't heat the rubber side, it would damage it... So what do I know...
Not really. You let the adhesive go transparent before putting it together and it sticks very quickly, the drier is just to speed up that process. You can just leave it until it goes transparent
It is a bad idea to use hairdryer to blow dry the glue on the rubber as it will soften the rubber.
where is amazon ???and which country
Prajwol Prajapati amazon is an online shop.
i am kid playing tt can give me some any good rubbers for penhold backhand??
I'd recommend Butterfly Bryce Speed or High Speed. It's the rubber that Wang Hao use.
質問いいですかね？自分テナジー買おうと思っているんですね、そして05と64にしたいんですがバックサーブも良くするので両面05の方がいいのでしょうか？
そうですねえ。もし両面が回転重視の攻撃タイプだったら、両面０５も悪くないです。ボール先週みたいに。バックの攻撃力や安定性が上がるが、バックの防御の方はちょっと弱めるかもしれないです。それが良ければ両面０５お勧めします。
shingoukiex 了解です！ありがとうございました！チャンネル登録致しました（前からしてた）
ありがとうございます！
バヤリース サーブだけで悩んでれば反転して使うのがいいかもしれないですね。
At 8:30 I would think marking the rubber, and laying the bat on the marked rubber might work easier.
That just makes it harder to get straight and also you do it like this to avoid air pockets.
Hey, if a pair of scissors are very sharp, could we achieve that really good cut? Please write me! =D
Santi Torres hello. Even if the pair of scissors are Sharon u still won't get a perfect clean cut because every time you stop to change the angle of the scissors you will get more or less an edge sticking out.
Thank you =D I cut the rubber with a blade and that give me a good clean cut thanks.
how much it cost in japan？ the blade and 05 64
thunerOCEAN blade is about 20000 yen. Rubber is about 7500 yen each
how can i buy a sharp knif like the one u have please
The one I use is a surgical knife for operation. You can use any sharp cutter knife and it'll work fine.
The hair dryer step aint necessary eyt
What is gule
is the T05 on your Backhand?
_ RulesTV no, T05 has a slightly harder rubber so it's more suited for the forehand. T64 is for the backhand, it has more control on passive plays like backhand blocks or punch shots.
is that rubberized handle good?
What glue is that?
Cynthia Abutan nittaku finezip
ASMR right there, but thanks, it helped.
松平健太ALC買ったんですがテナジー05か80をフォアにバックはロゼナをはろうと思ってますがどうですか？
yuu ki いいと思います。05がおおすすめです
shingoukiex 分かりましたフォアは05にしてみます
バックハンドで攻撃すること多いんですけどロゼナでも大丈夫ですかね？
yuu ki 大丈夫です ろぜなは80に似てる
shingoukiex 元々両面テナジー80なので大丈夫そうです
ありがとうございます
チャンネル登録しましたのでこれからもがんばってくださいあ
shingoukiex 元々両面テナジー80なので大丈夫そうです
ありがとうございます
チャンネル登録しましたのでこれからもがんばってくださいあ
how much this wood and rubber cost
the Blade 130€ and the Rubbers per Sheet 56€.
So satisfying sound
thank you for sharing, I'm wondering, did you seal (lacquer) your viscaria blade?
Vu Nguyen no I didn't
any damage on your blade? how often do u change your rubbers? thanks.
albert lopez No damage. I take a lot of care when changing rubbers especially when peeling. I change rubbers roughly once a year. Recently I've switched to Xiom rubbers because T series is too over priced for me to keep using on a yearly basis. Please watch the newest demonstration of my on gluing new rubbers! Thank for for your comment.
@@shingoukiex I play with Xiom Omega VII Tour max on forehand and Tibhar Evolution Mx-s max on backhand on Tibhar Fortino Pro blade. Is it good setup? I am wondering if the mx-p on backhand would be better. Thanks
@@shingoukiex are you using a scalpel handle with discarding blades? where did you get those?
which glue?
Nittaku Finezip
そのラケットはもしかして…
ビスカリアですか？
コルベル？
矢吹俊人 ビスカリアですねえ
shingoukiex いいですね❗️ビスカリア❗️俺もいつか欲しいです
矢吹俊人 そうですねえ とても良いラケットと思います。
shingoukiex ですよね〜👍
俺の知り合いも持ってて打たせてもらったらすごかったです
矢吹俊人 世界一ラケットだと思います。自分は二個を持っています。他のビデオも見てください。チャンネル登録もよろしくお願いします。
Hey! Why do you need to dry the glue before putting them together?.
rozzner tellen it won't stick if it's wet.
La verdad muy hermoso que buena tecnica.
Me five minutes into this, paddle broken into 100 pieces from rage.
I know I will fuck this up somehow when I try it.
Thanks for the video, I've never changed a rubber before but I was thinking on using a scalpel too, I've seen how rubbers look when they are cutted with scissors and that's just ugly.
Yea. I'm not very good at cutting with scissors either. It ends up like dog bites lol.
ラバー貼りとてもうまいです！カッターを使うとこを参考にしたいと思いました。
チャンネル登録しますね。
ブドウマスカット よろしくお願いします！
why so much dislike on the video its perfect
what's glue you use this?
jomtack kreanga nittaku finezip
Imagine how nervous he is when putting on 80 dollar rubbers
Not so nervous just looking for perfection.
If i buy rubbers online from this website www.megaspin.net/store/default.asp?pid=sanwei-ap-lightwei
will i have to put in 2 orders or does the shipment contain 2 rubbers already?
Paul Tran I’m pretty sure it’s one sheet
T_T thank you!
I just did my hadraw VK without sealing it ut wont create porblems later right?
your rubber is like 99% new why would you remove them?
Rady Bou I've used it for a year and it's lost its grip.
i get it! thx :)
The rubber should be peeled across the wood grain and not along with the grain
Howard Lindo thank for for your comment. Please read my description.
you could have just bought a blade
it is only like $5 or 480 piso in the Philippines
Post me (your neighbor in Japan) this SAME bat & rubbers (Tenergy 05) & I will post you 5,000 piso.
Thank you!!
Thanks
Rubbers do NOT come off this easily...
I think it depends on the type of glue and the amount you use.
Scan you do an unboxing
GamingWithLucky of a blade?
Cutting rubber sounds can be asmr