Це відео не доступне.
Перепрошуємо.
TimeSert thread repair. How to install timeserts & how they work. Best thread repair on the market!
Вставка
- Опубліковано 18 сер 2024
- In this Video i show you how to Install TimeSerts using the Timesert repair Kit.
Timesert Amazon
www.amazon.com...
Thanks for watching. Please subscribe to our channel
/ ericksonsmandp
/ ericksonmap247
ericksonmap@gmail.com
www.iride247.com
I time serted my f250 superduty 5.4 spark plugs holes after they puked plugs out. I have done 3 already. Kind of scary doing it in the truck but they work great. Best kit I ever bought. Made my money back 2 fold by fixing other fords.
They are a live saver!!
Thank you for the video. I have never used time serts, but I must ask, is there no need to use red permatex threadlocker on the outside of the time sert? I would think to possibly prevent any chance of leakage and also for insurance against it coming out. I am thinking about using this on a stripped set of threads on a spark plug hole on a cast iron head. Thanks for your time.
The insert expands when you insert it with the tool. Depending on where the hardware is, you could use sealants. But it depends on the application
Great job, might need a better moisture separator in the air line?
Yeah we have an air line cooler/ water separator on the main system 120gal 15hp 3 stage compressor. That unit had a valve go bad so I was using our OLD backup system in this video.
@Erikson Machine & Performance nicevideo. I sent you an email about getting my JS440 head Milled and my nozzle bored.
Thank you
Good video! Are time-sert designs good for leak prevention? I have a helicoil setup (haven't tried using thread seal yet) and am getting a leak past the threads. This is my attempt to salvage a bleeder screw using one of those two piece NPT repair kits. It would appear that a solid insert design would be a better option over the helicoil.
Yes but you need to use thread sealant when u install.
@@EricksonMachinePerformance Thanks!!
If I'm fixing a 17mm hole, how big do I make the new time sert like 19 or 20mm?
I'm just wondering if I need to go up in bolt size since the 17mm threads are stripped
Thanks for the video,,,, But really, nobody, or few, have access to this equipment.
ALOT of people have milling machines or drill presses.
@@EricksonMachinePerformance i did a poll,,, nobody has either
@@thomasgronek6469 then you should seriously look at buy 1 if you want to machine and repair your own equipment. Many of my customers do own this equipment. best wishes and happy new year. thanks for watching/
So how do you know what size for different sizes of bolts?
It depends how deep the hole is normally you want at least 1.5x the diameter
@@EricksonMachinePerformance okay Thanks
Sure wish taps had a pilot ahead of the cutting edge.