Cummins diesel injector cleaner setting calibration 👍💯🔧🔔

[e-mail] / @ayazkhandieselpump 🇵🇰👍💯❤️🔔Here's a comprehensive guide on the Cummins diesel engine injector cleaner setting and calibration for the NT855 engine:
Injector Cleaner Setting:
1. Injector Cleaner Type: Use a Cummins-approved injector cleaner, such as the Cummins Injector Cleaner Kit (Part Number: 4956551).
2. Injector Cleaner Ratio: Mix the injector cleaner with diesel fuel at a ratio of 1:100 (1 part injector cleaner to 100 parts diesel fuel).
3. Injector Cleaner Dosage: Add 1-2 ounces of the injector cleaner mixture to the fuel tank for every 10 gallons of diesel fuel.
4. Idle Speed: Set the idle speed to 600-800 rpm.
5. Engine Load: Run the engine under a light load (less than 50% of maximum load) for 10-15 minutes to allow the injector cleaner to circulate through the fuel system.
Calibration:
1. Connect the Calibration Tool: Attach the Cummins Calibration Tool (Part Number: 4956552) to the engine's electronic control module (ECM).
2. Select the Calibration Mode: Choose the "Injector Cleaner" calibration mode.
3. Enter the Calibration Settings: Input the desired injector cleaner settings, including the cleaner ratio, dosage, and idle speed.
4. Perform the Calibration: Run the calibration process according to the tool's instructions.
5. Verify the Calibration: Check the engine's performance and ensure the calibration settings are correct.
NT855 Engine Specifications:
Engine Type: Cummins NT855 Diesel Engine
Displacement: 855 cubic inches (14 liters)
Power Output: 210-400 horsepower
Torque Output: 700-1400 lb-ft
Fuel System: Electronic Fuel Injection
Injector Cleaner Calibration Settings:
1. Injector Cleaner Ratio: 1:100
2. Injector Cleaner Dosage: 1-2 ounces per 10 gallons of diesel fuel
3. Idle Speed: 600-800 rpm
4. Engine Load: Less than 50% of maximum load
5. Calibration Mode: Injector Cleaner
Important Notes:
1. Always follow the manufacturer's instructions for the injector cleaner and calibration tool.
2. Use only Cummins-approved injector cleaners and calibration tools to ensure compatibility and avoid damage to the engine or fuel system.
3. Perform the injector cleaner setting and calibration procedure regularly to maintain optimal engine performance and fuel efficiency.
4. Consult the Cummins NT855 engine manual for specific instructions and guidelines on injector cleaner setting and calibration. #like #video #ayazkhan #channel #sabscraibe