How to Make a Mobile Tool Cart with Storage For Everything

Поділитися
Вставка
  • Опубліковано 24 сер 2024
  • DIY Mobile Tool cart for small shops. This cart has a lot of storage features to help you maximize the organization of your shop! I like having a rolling tool stand in a small shop for space savings. Amazon and other affiliate links are used in this description to help support this channel.
    Massca M2 Pro Pocket Hole Jig - bit.ly/3yyRGOH
    TOOL CART PLANS www.731woodwor...
    Videos To Watch Next
    How to Build Drawers - • 3 Ways To Build EASY D...
    DIY Simple Tool Cart - • Rolling Tool Cart / Pl...
    Greatest Free Gift I've Ever Received: story4.us/731Wo...
    Faith-Based T-Shirts faithvalleytee...
    *Products Used to Build The Tool Cart
    Massca M2 Pocket Hole Jig - amzn.to/3Ms5Y9C
    1 1/4" Pocket Hole Screws - masscaproducts... ?aff=3
    Massca Jig Mounting Board - www.creativeto...
    Milwaukee M12 Drill/Driver - shrsl.com/41ymv
    Rockler Bench Cookies - amzn.to/3rQaOUX
    Festool Track Saw - amzn.to/3TkqfAo
    TSO Track Square - bit.ly/3Cw2HSd
    Festool Dust Port Cover - tidd.ly/3RryWYm
    Jessem Stock Guides - amzn.to/3EEKpB5
    Clamping Squares - lddy.no/1d7gu
    Small Bessey Clamps - amzn.to/3CVjOyg
    Kreg Pocket Hole Clamp - amzn.to/3RSzzdC
    Parallel Clamps I Recommend - amzn.to/3rTU6E2
    Squeeze Clamps - lddy.no/1d7gv
    Right Angle Drill Attachment - amzn.to/3g2y8Mo
    Short Pocket Hole Driver Bit - masscaproducts...
    Chisels - amzn.to/3Se8bHj
    Kreg Setup Blocks - amzn.to/3VoNJ9h
    Battery Holders - tidd.ly/3CV9WVf
    Kreg Hinge Jig - amzn.to/3Tc5Ygs
    Hinges - amzn.to/3S0qJKX
    Forstner Bit Set - amzn.to/3ECwpYo
    Drawer Pulls - amzn.to/3euLvog
    Spring Punch - amzn.to/3TfGBdu
    3" Casters - amzn.to/3Ms0ufh
    Drawer Slides - amzn.to/3MxMEb5
    Titebond 3 Wood Glue - amzn.to/3CyDoif
    CA Glue - amzn.to/3euzEGA
    Tools On The Cart -
    Milwaukee Parts Organizers - homedepot.sjv....
    DeWALT Parts Organizer (will fit in the opening) - amzn.to/3EAmiDv
    DeWALT Planer - amzn.to/3TjelXr
    Wahuda Jointer - amzn.to/3rQTuPl
    Spindle Sander - homedepot.sjv....
    Air Compressor - amzn.to/3eqXfIg
    Jorgensen F Clamps - amzn.to/3erTS3X
    Bessey F Clamps - amzn.to/3CUGfn4
    Other items
    Dust Mask - amzn.to/3g5B7nm
    Favorite Tape Measure - amzn.to/3eoaI3P
    Safety Glasses by the pack - amzn.to/3MsRqGO
    Shirt I Was Wearing - www.731woodwor...
    Hoodie I Was Wearing - www.731woodwor...
    Miter Saw - amzn.to/3VB9nr4
    Table Saw - amzn.to/3CRce7L
    Miter Station Stop Block System - amzn.to/3VrDf8W
    24" Woodpecker Edge Rule - amzn.to/3TBiZjR
    24" Benchmark Rule - lddy.no/1d7gw
    Jason Bent's Hinge Video - • This is so confusing f...
    Follow me on Amazon for my favorite tools and supplies: www.amazon.com/shop/influencer-4e5e1fdd
    Join this channel Patreon Supporters to get access to exclusive member-only live streams, discounts, and other perks: / 731woodworks
    I get my stickers from Sticker Mule. Use this link to get $10 off your next order. www.stickermul...
    This video was sponsored by Massca Products
    #731woodworks #diy #woodworking

КОМЕНТАРІ • 244

  • @731Woodworks
    @731Woodworks  Рік тому +3

    ▼EXPAND FOR TOOL LINKS and INFO▼
    Watch Next = How to Build Drawers - ua-cam.com/video/Ls6G4q4TGew/v-deo.html
    Tools In This Video:
    Massca M2 Pro Pocket Hole Jig - bit.ly/3yyRGOH
    TOOL CART PLANS www.731woodworks.com/store/diy-mobile-tool-cart-with-storage
    1 1/4" Pocket Hole Screws - masscaproducts.com/collections/pocket-hole-screws-plugs/products/1-1-4-coarse-thread-8-zinc-pocket-hole-screws-150-units ?aff=3
    Massca Jig Mounting Board - www.creativetoolco.com/collections/massca-products/products/massca-pocket-hole-jig-mounting-system
    Milwaukee M12 Drill/Driver - homedepot.sjv.io/5brZG3
    Rockler Bench Cookies - amzn.to/3rQaOUX
    Festool Track Saw - amzn.to/3TkqfAo
    TSO Track Square - bit.ly/3Cw2HSd
    Festool Dust Port Cover - tidd.ly/3RryWYm
    Jessem Stock Guides - amzn.to/3EEKpB5
    Clamping Squares - lddy.no/1d7gu
    Small Bessey Clamps - amzn.to/3CVjOyg
    Kreg Pocket Hole Clamp - amzn.to/3RSzzdC
    Parallel Clamps I Recommend - amzn.to/3rTU6E2
    Squeeze Clamps - lddy.no/1d7gv
    Right Angle Drill Attachment - amzn.to/3g2y8Mo
    Short Pocket Hole Driver Bit - masscaproducts.com/collections/frontpage/products/massca-square-driver-bit-set?aff=3
    Chisels - amzn.to/3Se8bHj
    Kreg Setup Blocks - amzn.to/3VoNJ9h
    Battery Holders - tidd.ly/3CV9WVf
    Kreg Hinge Jig - amzn.to/3Tc5Ygs
    Hinges - amzn.to/3S0qJKX
    Forstner Bit Set - amzn.to/3ECwpYo
    Drawer Pulls - amzn.to/3euLvog
    Spring Punch - amzn.to/3TfGBdu
    3" Casters - amzn.to/3Ms0ufh
    Drawer Slides - amzn.to/3MxMEb5
    Titebond 3 Wood Glue - amzn.to/3CyDoif
    CA Glue - amzn.to/3euzEGA
    Tools On The Cart -
    Milwaukee Parts Organizers - homedepot.sjv.io/3PgENd
    DeWALT Parts Organizer (will fit in the opening) - amzn.to/3EAmiDv
    DeWALT Planer - amzn.to/3TjelXr
    Wahuda Jointer - amzn.to/3rQTuPl
    Spindle Sander - homedepot.sjv.io/e4YNGj
    Air Compressor - amzn.to/3eqXfIg
    Jorgensen F Clamps - amzn.to/3erTS3X
    Bessey F Clamps - amzn.to/3CUGfn4
    (If you use one of these Amazon and other affiliate links, I may receive a commission)
    Some other useful links:
    Daily Tool Deals on my website: www.731woodworks.com/tool-deals
    Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter
    Check out our easy-to-follow woodworking plans: www.731woodworks.com/store
    Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

  • @rs2343-o4e
    @rs2343-o4e Рік тому +3

    Matt, I for one love the complete project videos. They are how you got started please stay with this type of video, they are your roots. Please dont jump on the shorts band wagon.

    • @731Woodworks
      @731Woodworks  Рік тому

      Thanks. I gotta do shorts to keep the channel going. But I’ll have more of these builds as well.

  • @rexseven6907
    @rexseven6907 Рік тому +1

    Your pile of safety glasses reminded me of a small idea for people. Discovering affordable safety glasses with bifocal readers was one of my favorite finds. Sunglasses with readers are around too.

  • @dblarue8611
    @dblarue8611 Рік тому

    I appreciate your humility. Admitting and showing your mistakes proves your human and gives an amateur like myself hope👍🏻

  • @brandonwoodworkersclub4097
    @brandonwoodworkersclub4097 Рік тому +5

    Like how you start off showing the completed project first. So many just start off building and it leaves you wondering what's going on. That turned out really nice. Hope it works well for you.

    • @jimh472
      @jimh472 Рік тому +2

      100% this. More channels need to do this.

  • @arnoldolorenzo3474
    @arnoldolorenzo3474 Рік тому +4

    Hey brother, thank you for sharing the skills you’ve acquired through all your experience and the talent and gifts god has blessed you with.

  • @ShopNation
    @ShopNation Рік тому +4

    Great looking little cart!

    • @731Woodworks
      @731Woodworks  Рік тому +1

      Thanks! Your battery holders are awesome!

  • @pmcgurn1
    @pmcgurn1 Рік тому +4

    This is very straightforward and a great beginner project. The fact that I have the Dewalt planer and have similar struggles with where to put it made this one a no-brainer. Thanks for the awesome video, I"m looking forward to building this for my shop.

  • @kenjonwoodworking7277
    @kenjonwoodworking7277 Рік тому

    I always use ridgid insulation under my plywood when I’m breaking it down with my track saw. It works beautifully! Nothing falls after you cut it.

  • @timothyoshell4249
    @timothyoshell4249 Рік тому +3

    I appreciate the variety of your tool brands. I've always bought what I can afford and I'm trying to upgrade as I'm able. I think the fact that you, your tools, your project, and workspace are so relatable makes you more likeable and your page much more enjoyable to watch. I even have a random leaf blower I use constantly! Thank you and yall have a great day!

  • @gnomingoswoodworks1219
    @gnomingoswoodworks1219 Рік тому +2

    I love the pass-through for the planer. That will be in my mobile planer cabinet build for sure.

  • @chrislane6564
    @chrislane6564 Рік тому +2

    Matt, you’re the best. I love how you show your mistakes (not many) but that we all can make simple mistakes. Makes me confident on doing these projects.

  • @tbone2500
    @tbone2500 8 місяців тому

    Echoing some of the other comments, thank you, thank you, thank you for showing the little slip ups. For a guy that’s really hard on himself, it really helps me give myself a little grace when I make a mistake, knowing you are not perfect. 😉
    Watching lots of UA-cam how to videos, it can seem like no one ever cuts a piece wrong, as I seem to do periodically. 😅

  • @jimh472
    @jimh472 Рік тому +1

    I have planer and jointer on two separate carts. Your design looks much better

  • @JohnWaclawski
    @JohnWaclawski Рік тому +4

    So glad to see you building again. This video got a thumbs up within the first 10 seconds because I missed watching you build stuff. Thanks for sharing Matt! Keep the build videos coming!

  • @rickbooher8224
    @rickbooher8224 Рік тому +2

    Great design. I could see this as a kitchen movable island with just few minor changes. Add a nickle steel, stainless steel, marble or granite top for baking, candy or pasta making.

  • @johnmclain6535
    @johnmclain6535 Рік тому +9

    Very nice. Been seriously considering building one of these for my small shop! *saved*

  • @Arno4242
    @Arno4242 Рік тому +2

    You can also incorporate power, like a multiplug on the inside then you only have one plug for the cart to plug in when you want to use it. Nice build man!

  • @mikelharris495
    @mikelharris495 Рік тому

    I agree with Paul, you should do more builds. Anyone can do tool reviews but not everyone can build like you. You have great skills and I have been missing your builds.

    • @731Woodworks
      @731Woodworks  Рік тому +1

      Build videos get MUCH fewer views than anything else I put out. This one is no exception. I try to do one to two build videos per month. But so long as people don't watch them, it's hard to justify putting so much time and money into a project. For example, as of this minute, this video has 36k views. Of the last 10 videos I have released, at the same amount of time since published (first 2 days), 7 of those have many more views. The top 3, 50k to 70k views in the first 2 days. and that view rate continues as the video is out longer. I don't expect (and is highly unlikely) that this one would be any different. Just a little insight into why there are fewer build videos on my channel (and many others for that matter).

  • @robertstewart9658
    @robertstewart9658 Рік тому

    I love the slide through planer slot and since I have that exact Milwaukee parts box it will be perfect.

  • @jeanchance9334
    @jeanchance9334 Рік тому +3

    What I love about your channel and your woodworking is that you let us see that everybody will makemistakes from time. Evrn the great 731! That encourages all of us to know that it happens to someone who is considered the best I say that with all the admiration I have such confidence in your work.

  • @ArmyGmanN
    @ArmyGmanN Рік тому +1

    I need to build something like this. Thanks for doing another build video.

  • @anneoreilly4900
    @anneoreilly4900 Рік тому +1

    Love the slide thru! Smart!

  • @BethRavengeGreen
    @BethRavengeGreen Рік тому

    Ok. I'm posting this, because you had asked for suggestions. :)
    I got ahold of a (free) dresser set and would like to make a workbench out of it. Most youtube ideas I found were pretty old. I have the 6ft long dresser, and two bedside tables as well, I am trying to think of a way to possibly attach the two side tables to the back of the long dresser and maybe just have a place to scoot a chair or another larger item under the open space. I hope that makes sense. Anyway, I am newer to woodworking, but I love it! I can't afford to take out a mortgage for a few sheets of plywood and lumber to build one right now, so I'm hoping this will work.. lol Thanks, in advance for any help! :)

  • @philmininni5981
    @philmininni5981 Рік тому +3

    Matt, I appreciate you showing the mishaps. I don't feel so inadequate. I am just now getting ready to use some Outlaw Butter for four cheese slicer boards. Thanks for your channel.

  • @richardharrold8777
    @richardharrold8777 Рік тому

    I so wish I'd watched this awesome video three days ago before I spent so much time planning my own mobile storage cart!
    However, it's reassuring to see that you confirm so many of the decisions I made - and the power tips are really appreciated by the likes of me with so much less experience than you.
    This is a fantastic space saver for those of us with smaller shops. Can't wait for the weekend and the chance to start building my own version of this great cart! Many thanks!

  • @lawrencemay8671
    @lawrencemay8671 Рік тому

    I cut about 12 3 x 3 blocks from a 2 x 6; then sanded them smooth, glued two to each other for added hight for plywood support. Did the same for my lawn mower, cut four exact one inch 3 x 3 blocks to support the mower housing to level it exactly. I do this once a year as I do my spring tune up.

  • @mellymel1100
    @mellymel1100 Рік тому +1

    You're so clever! Thanks for sharing your ideas, skills, and talent!

  • @Paul-044
    @Paul-044 Рік тому +1

    I own a Massca pro M2 pocket hole and it is worth the money and it's made metal and aluminum. Unlike the blue brand. The cabinet is a great idea and it looks great. Great video and content

  • @ghostface1737
    @ghostface1737 Рік тому

    I. Have. Been. Needing. This. Project. Forever! Thanks for the inspiration, brother! God bless!

  • @tfwoodcraft
    @tfwoodcraft Рік тому

    This thing is great! I have a big cabinet thing thats not on wheels blocking most of my shop. I got it for cheap and used a cabinet and drawers from it for another project, but now I have my band saw, miter saw, and drill press sitting on top of it. Its a nice station but its always in the way.
    I think I'll build one like yours in this video and then finally organize a bunch of other crap laying around the shop with the added shelves and drawers. Thanks!
    Now I just have to figure out which tools I want on top of it.....

  • @xXSCARECROW19Xx
    @xXSCARECROW19Xx Рік тому

    I have the same exact planner and jointer and just got the Triton version of the sander. I will probably make this sometime soon. Genius build.

  • @bobsnow1996
    @bobsnow1996 Рік тому

    Great quality build... I have a very small Shop/Garage so I too build only so big or small to fit my work space. I won't buy a tool that can't fit neatly away in the Shop/Garage it's all about the space! I watch more 731you-tubes than any other you-tubes because you are always trying new stuff... and you are very prolific with your videos... just finishing up a sewing station for my wife. First time I made drawers... at first intimating... but they are so easy if you follow a some simple rules. Keep up the good work I do enjoy!

  • @rv4tyler
    @rv4tyler Рік тому

    A Thumb's Up for listing the tools on cart so I don't have to waste a day trying to track it down for purchase.

  • @scottswannie2500
    @scottswannie2500 Рік тому +1

    Once again Matt…that rocks. Don’t need one, but good to know.

  • @flashwashington2735
    @flashwashington2735 11 місяців тому

    Great cart! Now I must find horse to out in front of. Maybe that stubborn of the oldest living English idiom: you know the one they keep leading to water and still, he won't drink!! God bless you and yours. Thanks for this.

  • @scottmorris4914
    @scottmorris4914 Рік тому +1

    Good to see you posting builds. Thanks.

  • @CreativeCustomDesigns
    @CreativeCustomDesigns 10 місяців тому

    I was looking for ideas for a mobile planer table and came across this video......I already have a few other ideas as far as the cabinet design goes.......I do have a jointer coming soon so this size cabinet will work well.
    This will also give me a lot of practice with my newly acquired Kreg pocket hole jig.
    THANKS for this video Matt.

  • @beccamayberry9907
    @beccamayberry9907 Рік тому

    Also love that you included the candid mishaps, good thing I’m not the only one it happens to haha

  • @derekjarman1638
    @derekjarman1638 Рік тому +1

    Looks great! I like the holders for the batteries - good idea 👍

  • @imsowright90
    @imsowright90 Рік тому

    Looks nice. I need to build one like that.

  • @andrewmakestuff
    @andrewmakestuff Рік тому

    Im in the middle of re-doing my garage shop and am struggling with where to put my jointer and planer, this is exactly that I am looking for! Love the pass-through and material staging section under the planer!

  • @delmsie
    @delmsie 5 місяців тому +1

    I was gong to build a Flip Cart until I spotted this beauty!

  • @AN1Guitarman
    @AN1Guitarman 9 місяців тому

    Next time, make the storage modular! Add French cleats to several locations like where you hang the clamps and such then the box can adapt overtime to your needs!
    There are some neat ways I've seen to make locking French cleats so that if you hit a bump with the box everything doesn't jump off, that will be necessary in this application.

  • @lincolndickerson1293
    @lincolndickerson1293 Рік тому

    Great build. Great descrption of the how’s, why’s, and what to watch out for. I like the pass under the planer idea.

  • @davedayton
    @davedayton Рік тому +8

    Very nice build.... I like the way you adapt the project as you build. Also I appreciate that you show your errors as they happen., it makes me feel better that I am not the only one that do these silly mistakes. 😜

    • @731Woodworks
      @731Woodworks  Рік тому +3

      I make a ton of them lol

    • @timothyoshell4249
      @timothyoshell4249 Рік тому +2

      I had the same thought about the mistakes. "To err is human" but it's nice to see a maker show they are human also. My current project I am over sanding because I forgot to set the depth on my hand planer and had a 'whoops!' moment.

    • @PureBloodWNC
      @PureBloodWNC Рік тому

      @@731Woodworks to error is human.
      Like others have said, I appreciate you showing your humanity with us.

  • @Buffy1967
    @Buffy1967 Рік тому +3

    Yeah it really turned out great! I know you look at analytics but I hope you do more builds , really enjoyed this one. One I'm going to follow for sure for my garage.

  • @kimhavey7850
    @kimhavey7850 Рік тому +1

    I love that you show when make mistakes. I just made a frame for the top of a table for third time!! Very frustrating! Good to know I'm not alone!

    • @731Woodworks
      @731Woodworks  Рік тому +2

      We all make them. Yea it’s very frustrating lol

  • @chriskirkemo2522
    @chriskirkemo2522 Рік тому +1

    Really enjoy your videos. Great idea for some functional workspace/storage. Cheers!

  • @mcmathwoodworks
    @mcmathwoodworks Рік тому +1

    Great idea for a build! I need to do something kinda similar soon in my shop.

  • @1packatak
    @1packatak Рік тому

    Can you make a small workbench that someone with just a circular saw, jig saw, drill, pocket hole tools and maybe a miter saw can build?? I need one about 24-28 wide and 20-22 deep. Don’t necessarily need drawers but maybe a shelf or two. And can support some weight. Everything I see is so big. This grandma would appreciate it!!!

  • @ozarkcraftsman2784
    @ozarkcraftsman2784 Рік тому +1

    Nicely done! Looks super functional.

  • @xquakexx
    @xquakexx 3 місяці тому

    Dude you just gave me an idea to turn my old drawing table into a custom thing. Thanks man!

  • @joefaraone977
    @joefaraone977 Рік тому

    Thank you sir! You have so many great ideas for the garage shop -- thank you! Blessings to you and your family!

  • @chadfallon3378
    @chadfallon3378 Рік тому +2

    Great video! I love these project build videos. I learned a lot. Thanks Matt!

  • @justinkeller4008
    @justinkeller4008 Рік тому +1

    Looks great!

  • @mysticswordsman
    @mysticswordsman Рік тому

    Its okay Matt, I am glad you do not edit out the mess ups too. This keeps us humble.

  • @PunkR0ckz09
    @PunkR0ckz09 Рік тому

    Very nice! Here's a power tip; Cut out a notch in the divider and locate the magnetic part of the "latch" in there. Then you can simply cut any flatbar stock and bolt it at the upper outer most part of the doors. No need to waste money on 2 kits! One is enough! :)

  • @goodscustomfurniture
    @goodscustomfurniture Рік тому +2

    Awesome Matt

  • @7tosand
    @7tosand Рік тому

    Excellent job. Your build was very detail oriented, as well as your instruction. Thank you for your service.

  • @JJAH28
    @JJAH28 Рік тому +1

    Very functional and a great use of space. Nice job!

  • @pteddie6965
    @pteddie6965 Рік тому +1

    Great shop cart design. I need to build this one.

  • @austinstephenson9877
    @austinstephenson9877 Рік тому

    Nice to see you building something again!

  • @ltsky311
    @ltsky311 Рік тому

    I saw your video of the new miter station, Have you thought of making a flip top stand for the Drill press and another tool, I see a lot of Planer / Drill press ones, might make it more convenient for your drill press situation. Nice work on this one. or a scissor lift so you can just slide it out and lift it up. There are some pretty cool ideas out there for this solution.

  • @guybowers9094
    @guybowers9094 Рік тому +2

    Great build video Matt, that cart will make a nice addition to the shop

  • @lisaalbrecht7900
    @lisaalbrecht7900 Рік тому

    Brilliant! Just purchased the plans. Looking forward to making this cart.

  • @J4Julz
    @J4Julz Рік тому

    I really enjoy your videos Matt, and you inspire me to make the things that will help keep me more organized. I really appreciate you!

  • @MikeZMonroe
    @MikeZMonroe Рік тому

    Nice job. I made a similar tool storage cart. Used two used base cabinets connected back to back. Stored many tools, small power tools and thus became super heavy. Problem…my casters failed. Buy heavy duty casters, looks like you did.

  • @tomatha3713
    @tomatha3713 Рік тому

    Just a thought to address the handle interfering with your planer; you could cut your uprights for your handle at a 45 degree angle from the top of the cart towards the floor and then flip it end for end and dowel them back on, that way it would push the handle away from the planer and give you access to the hand wheel. OR, could you make a riser to sit under the planer to raise it above the handle? Just a couple of thoughts. I really like the design and will have to think about adding one of these to my shop this winter. Glad to see a build video from you again, you always spark ideas for build for my shop.

  • @evelynmueller6523
    @evelynmueller6523 Рік тому +5

    Fantastic cart, fantastic build video. Thank you for taking the time to record this and post it. These builds have been missed over time. You do great work which shows us newbies how to get through a build like this. Awesome job Matt!!!

  • @wayneosteen1539
    @wayneosteen1539 Рік тому

    I love the idea of bench cookies, but the cost is prohibitive for me to have as many as I want. So I use hockey pucks. They're cheap and work perfectly!
    Thanks Matt for the great content. Keep up the excellent work!

  • @rtowns7999
    @rtowns7999 Рік тому

    You Sir, are an inspiration! Absolutely love your work and have learned so much from your videos!

  • @keithc6370
    @keithc6370 Рік тому

    I had planned on putting the dewalt planer and shop fox jointer together on a small cart just like you have. However I didn't think about the storage possibilities, nor using plywood only. Think I'll go with this build, thanks!

  • @RvKsword
    @RvKsword Рік тому

    i appreciate you leaving your mistakes in, makes me feel more confident in my projects, if someone with much more experience and skills than me can mess up, its not as frustrating for me :D

  • @lawrencemay8671
    @lawrencemay8671 Рік тому

    I do love your videos because you explain things as you. Go.

  • @LYTOMIZE_Woodshop
    @LYTOMIZE_Woodshop Рік тому +1

    I love the final decision you made to give more stability underneath. Better idea than adding more plywood!

  • @robertkerby2581
    @robertkerby2581 Рік тому

    Excellent design, and build!
    Well done!

  • @StampedClay
    @StampedClay Рік тому

    Yeah boy, more of THIS please. 🤲

  • @peterwilliams6188
    @peterwilliams6188 Рік тому

    Great video Matt, full of very useful tips. Thank you Sir.

  • @Joey-il4qd
    @Joey-il4qd Рік тому

    Great build video, I like the in-depth discussion, didn’t feel rushed and you showed your mistakes. I’ll be purchasing this file. Maybe a CNC table build in the future…

    • @731Woodworks
      @731Woodworks  Рік тому

      Oh yes, would be a perfect small CNC table

  • @HomesteadingGeek
    @HomesteadingGeek Рік тому +1

    I like this design,if I decide to make this I may make a pass through on one side of the handle area so I can store a roll of shop towels,just an upgrade I'd do for my shop.

  • @dennisTHEmenac3
    @dennisTHEmenac3 Рік тому +2

    Great build and design Matt. Looking forward to seeing this cart in action during future build projects

  • @rubecountryman
    @rubecountryman Рік тому

    Looks Great! Love the pass through area under the planer, I always set my boards on top and once in a while i knock one over and ding it up, this is a great fix to that. ... One suggestion, add a little piece of foam in the cutout area under your rules to keep em' from banging' down hard when you drop em' in ;-)
    Great content!

  • @beccamayberry9907
    @beccamayberry9907 Рік тому

    Love love love this video. Perfect mix of walking us through steps in real time vs just overlaying while the build steps are in fast forward. Idk if that makes sense but I’m a fan 😂🎉

  • @vernsteinbrecker3759
    @vernsteinbrecker3759 Рік тому +1

    Nice job, great design

  • @debandmike3380
    @debandmike3380 Рік тому

    The king of product endorsement.

  • @jonnysaenz5048
    @jonnysaenz5048 Рік тому

    I’m loving the cabinet style builds man. Keep up the good work and thank you!

  • @oldave100
    @oldave100 Рік тому +1

    Dude, we gotta make on of those bad boys!!

  • @stanmashek3085
    @stanmashek3085 Рік тому +1

    very nice

  • @capnmark4
    @capnmark4 Рік тому +1

    Nice cart! I was planning on building a wall rack for 4 storage boxes similar to your but now I'm thinking about turning that project into a drill press stand.

  • @TheGiantWoodworks
    @TheGiantWoodworks Рік тому +3

    Great build! I always love your build/project videos because you always do a wonderful job at explaining the details and I always find myself learning new things to put towards my own future tool carts and shop projects! Thanks as always.

  • @DavidMcCabe
    @DavidMcCabe Рік тому

    This build took some thought Matt. Nice job on it! I have both tools as well and built a milling cart out of one sheet. Not nearly as cool but holds the tools!

  • @elitelawn9547
    @elitelawn9547 Рік тому +1

    That is a very cool cart. Great for the planner. I think I need to make one. Thanks and great job 👊 mistake and all 🤣

  • @williamswoodworks8373
    @williamswoodworks8373 19 днів тому

    Another great job sir but could I ask how your getting rid of your wood chips and dust ?

  • @JamesWelbes
    @JamesWelbes Рік тому

    Finally, a project video!

  • @mad2barxhst
    @mad2barxhst Рік тому

    Very nice and functional.

  • @jimmugford
    @jimmugford Рік тому

    Love the channel and instead of using those cookies I use pieces pink ridgid insulation.

  • @eerokartiala5957
    @eerokartiala5957 6 місяців тому

    Great job on explaining the project. One Question, how do you hook up the electrical on the cart. Any ideas of what to use, like a power strip? Something to keep the cords away form the planer/jointer?

  • @DoresoomReviews
    @DoresoomReviews Рік тому

    Nice design! I have the same exact planer and jointer and had been kicking around the idea of making a cart for them both. I'll have to check out your plans!

  • @Karpe_Deem
    @Karpe_Deem 11 місяців тому

    I have a 5x6 ft craft area.
    LET'S DUCKING GOOO.