Coil shock( BOS Suspension, EXT STORIA LOK V3 - ENDURO RACING) Tires (Goodyear Newton 2.4), Syntace carbon bars and pedals, Selle Italia SLR Flow Saddle. :)
Daaayum that's pretty much as good as it can get with the current proven tech (i.e. without going into crazy prototype products). Can't help but think that the nearly-matched black paint of the Fox 36 lowers looked better than the silver Pike though... Otherwise definitely a dream build.
Super cool bike setup!! Just one thing laking do.... with that color scheme it has to have Cane Creek eeWings Titanium Cranks! just saying :D if were going Dream Bike, full one dude!! ;)
It'd be cool if the SRAM AXS had a charge mode. Riding on the flat or a downhill, adds some slight resistance in the rear der pulley and recharges the thing!
Agree with most all the changes. For brakes I would go Shimano though (like XTR 4 piston or Saint), the SRAM brakes just feel too soft to me. I do like the feel of the Pike better than what Fox has offered, however I have yet to try out the a Factory model with the GRIP 2 damper, which I hear is quite a bit better.
Since you said that you started off stock. I’m assuming that was with the Fox 36 fit 4? Do you notice any difference from the Fox to the Pike Ultimate, since the offset is not exactly the same? Thanks!
That is correct, both are great forks just have a slightly different feel. The Pike is a bit more plush and forgiving whereas the Fox is stiffer and has more of a "race" feel.
@Worldwide Cyclery my Yeti Sb130 has a fair bit of flex in the rear end? I believe even with the front brake on while putting power to the drive side I can see some movement. How do I know when the flex is too much or if its the magical compliance that Yeti has engineered into the frame?
Thanks guys was fancying trying a coil but super expensive and complex finding the right size for a new shock I will buy a megneg from you guys soon thanks
I recently bought one of these bikes and I LOVE it!!! About 3 rides in I noticed some rear triangle flex. Yeti claims they engineered this “compliance” into the frame. What do you guys say about this?
All frames have flex. In comparison the Yeti is not "flexy" by any means. It's also not overly stiff and harsh like a Pivot. Brands are working to lay up the carbon so it's compliant and just right between too stiff and too flexy. Yeti has done a great job at this.
Worldwide Cyclery thanks... always helpful to see how folks are sizing these longer bikes .. ESP as a shorter guy makes a huge difference to know , thanks
Grip is very underrated. I have a single Assegai DD 27.5 x 2.5 WT that I haven’t tried yet. If you only had one would you mount it front or back? How do you find the Max Grip ? I’m currently running 2.6 FBR/FBF combo on a Mach 6 with Next R 36 rims. I really like the high flotation tires for grip/ traction. Was even thinking Assegai in back and FBR up front? Thoughts?
I presume it will ride well if there are positive air spacers installed. I’m likely going to max positive spacers out once my order from your shop gets shipped.
What would you change about Adams SB130? Let us know!
Nothing! The Yeti SB130 is a super perfect MTB!
A Sram company stem
Coil shock( BOS Suspension, EXT STORIA LOK V3 - ENDURO RACING) Tires (Goodyear Newton 2.4), Syntace carbon bars and pedals, Selle Italia SLR Flow Saddle. :)
Take off anything that’s electronic.
Trade for NP Mega
Holding the button down was the best feature of di2 as well.
I just saw one of these in person and it is one of the nicest looking bikes I've ever seen.
That bike is epic! Love seeing Yeti's with Rockshox on them.
Thumbs up for flats!
That bike must be worth more than most cars super sick build
I love the color scheme. Perfect bike.
I’m sure I remember seeing this bike in my dreams
Just wow! Piece of art.
Daaayum that's pretty much as good as it can get with the current proven tech (i.e. without going into crazy prototype products). Can't help but think that the nearly-matched black paint of the Fox 36 lowers looked better than the silver Pike though... Otherwise definitely a dream build.
That’s an epic build! Nice work
Super cool bike setup!! Just one thing laking do.... with that color scheme it has to have Cane Creek eeWings Titanium Cranks! just saying :D if were going Dream Bike, full one dude!! ;)
Sick build. I love these bike check videos
Yeti = dream bike!
Damn!!!!!!!
Super Nice 👍
Maintain the remarkable job !! Lovin' it!
130 - $100 Bills That's what this 130 stands for.
This will decimate all! Once you spend about $11k and overnight parts from SRAM.
epic bike!
That's damn delicious! Those Assguys are pretty cool. Gonna need an EXO for a front tire
SICK!!!!!!!!!!!!
It'd be cool if the SRAM AXS had a charge mode. Riding on the flat or a downhill, adds some slight resistance in the rear der pulley and recharges the thing!
You mean like, have a dynamo rear pulley? Not with today's tech, no can do. Would be huge.
@@triplebutted they'll figure it out! ;)
its my dream MTb fullsus ... very cool ...
Bro that 130!!
I'm waiting for the Assagai exo version
EXO+!!!!!!
Agree with most all the changes. For brakes I would go Shimano though (like XTR 4 piston or Saint), the SRAM brakes just feel too soft to me. I do like the feel of the Pike better than what Fox has offered, however I have yet to try out the a Factory model with the GRIP 2 damper, which I hear is quite a bit better.
How did you go about getting the right tune for the super deluxe? I want to put one on my sb130 but I couldn't figure out how to get the proper tune
This bike is so damn fun!
Sick setup for sure! That BB is so far back now just to fit a water bottle. Has anyone slammed the bottom of the frame because of this?
How is the fit of the SB130? I’m 5’9 and usually am between sizes. According to Yeti I’m a solid medium. What does WWC say??
I think a medium would be perfect for you! Adam is 5ft 8 and the fit is great :)
You should do a build with a subscriber.
Nice looking ride! What is the weight as is?
Since you said that you started off stock. I’m assuming that was with the Fox 36 fit 4?
Do you notice any difference from the Fox to the Pike Ultimate, since the offset is not exactly the same?
Thanks!
That is correct, both are great forks just have a slightly different feel. The Pike is a bit more plush and forgiving whereas the Fox is stiffer and has more of a "race" feel.
@Worldwide Cyclery my Yeti Sb130 has a fair bit of flex in the rear end? I believe even with the front brake on while putting power to the drive side I can see some movement. How do I know when the flex is too much or if its the magical compliance that Yeti has engineered into the frame?
On that note... how do the Zipp 3zero Motos feel in the rear end in terms of flex? Any wheel rub on the chain stays or seat stays?
Did you turn it in to a "lunch ride" when you changed the rear shock, or is it still set at 130mm?
Still at 130, fork has been bumped up to 160 though :)
Would you recommend the megneg tempted to buy one
Definitely! Great upgrade that really gives your shock that “coil” like feel. Loving it so far :)
Thanks guys was fancying trying a coil but super expensive and complex finding the right size for a new shock I will buy a megneg from you guys soon thanks
Staff check on Zack please !
Fork for lyrik just because is red 😀
How much does it weigh as it sits? Always curious why that important piece of info is left out of reviews...
I want to know as well
Whats the travel on that pike?
why did you go with the Pike and not the Lyrik?
It was sent to us for testing :)
What are the specs of the Superdeluxe rear shock?
I recently bought one of these bikes and I LOVE it!!! About 3 rides in I noticed some rear triangle flex. Yeti claims they engineered this “compliance” into the frame. What do you guys say about this?
All frames have flex. In comparison the Yeti is not "flexy" by any means. It's also not overly stiff and harsh like a Pivot. Brands are working to lay up the carbon so it's compliant and just right between too stiff and too flexy. Yeti has done a great job at this.
I’d love to see a video about this topic: compliance and comparisons of Yeti vs other brands :) ;)
What’s your height / weight?
5 ft 8 , 170 lbs :)
Worldwide Cyclery thanks... always helpful to see how folks are sizing these longer bikes .. ESP as a shorter guy makes a huge difference to know , thanks
Why heavy slow DD tires ?
Exo+ wasn’t available at the time and I really wanted to try the assegai, a bit heavy for sure but the grip makes up for it :)
Grip is very underrated. I have a single Assegai DD 27.5 x 2.5 WT that I haven’t tried yet. If you only had one would you mount it front or back? How do you find the Max Grip ? I’m currently running 2.6 FBR/FBF combo on a Mach 6 with Next R 36 rims. I really like the high flotation tires for grip/ traction. Was even thinking Assegai in back and FBR up front? Thoughts?
Go deeper on the megneg! That was glossed over
I presume it will ride well if there are positive air spacers installed. I’m likely going to max positive spacers out once my order from your shop gets shipped.
What height are you?
5 ft 8
how tall are you?
Not I squad
Change the owner... to me!
Chains to short oi
First!
mortadha Abdul wow. Good job.
@@mikethadeeter thanks man!
hate rockshock