Primus Stove Restoration | Very Old Kerosene Stove Restoration
Вставка
- Опубліковано 27 сер 2024
- Fanpage: / mr-nvc-diy-channel-255...
#VeryOLD, #MR.NVC, #PrimusStove
Help us on Patreon: / mrnvc
For copyright matters please contact us at: michaelusher141@gmail.com
1. Very OLD Drilling Concrete Restoration
• Very OLD Drilling Conc...
2. Very Old Bench Grinder Restoration - Step By Step Restoration
• Very Old Bench Grinder...
3. CIRCULAR SAW Restoration (Very Old) - Rusty and Restore It
• Very Old TypeWriter Re...
4. OLD Electric Screwdriver Drill Machine RESTORATION
• OLD Electric Screwdriv...
5. Very OLD Angle Grinder Restoration
• Very OLD Angle Grinder...
6 Very Old Electric Plane Makita Restoration
• Very Old Electric Plan...
7. Very OLD Steel and Metal Saw Power Tool RESTORATION
• Very OLD Steel and Met...
8. Drilling Machine with Sliding Mechanism Vise Restoration
• Drilling Machine with ...
Playlist:
Restore It - Restoration Series 2018
• Restore It - Restorati...
Primus Stove Restoration video, I made this video in very detail the process of restoration.
I don't add music to these videos so that you can choose to listen to what you like if you would like to.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our channel include of guiding videos:
- DIY projects
- Restoration Projects.
- Disassembly
- Clean all parts
- Remove old paint
- Spray new color
- Restore it
- Testing
Please subscribe us.
The flame should be blue. The top nozzle really needs to be extremely hot to vaporize the kerosene and this requires patience. We used to use methylated spirit in the top reservoir, with initially very little pressure in the main reservoir it starts to draw the kerosene up and you must look for this happening and then increase the pressure a bit. The burner flame then starts heating the top up more and you can see the kerosene flame mixing with a lot of air in this way. Finally pressurize fully and what you have is much like any gas burner but a bit noisier. Methylated spirit for starting means the whole business is much cleaner and the stove can go in a rucksack afterwards. I think Primus was originally Swedish. My own stoves tended to get pinhole leaks around the filler neck. But very nicely done.
Yes. Great comment. Thanks
Tilley lamps which work similarly have a regulator to gradually allow kerosene up the central tube. Im not sure why the stoves never had this because it allows good control and if not hot enough the kerosene flow can be stopped. It was the same for plumbers’ blowlamps.
This is a poor quality Premus stove, we use to use Premus made in Sweden, it was great, the color of a flame was blue..
My old Primus used to roar like a moon rocket! Plenty of pressure required. Maybe he didn't want to use to much with all the solderinf done??
A part of the burner is missing, there should be a copper collar resting on the ring about fifteen millimetres from the top of the burner. It acts as a venturi and causes the flame to burn blue . this collar used to glow red hot on my stove and was quite easily damaged so I suspect they were made easily replaceable explaining why its missing on this example.
I got two small ones, love em, ones brass the other one is Crome with unfolding legs you know the ones, I love restoring them too, fantastic bits of kit 👍 so glad other people are interested in them too thanks I'm not alone 👍🙏🏻
Très bien pour la rénovation du réchaud, mais vous avez oublié de mettre la coupelle de la tête d'allumage. Sans cette coupelle vous aurez une flamme jaunâtre qui va noircir tout les récipients 😍👍
Well, I'm about to sound stupid. Never crossed my mind to use the lathe to hold a polishing wheel. Speed control, proper pressure /heat. Perfect for polishing!!
I will put my Lathe back together soon..... Your videos are inspiring!
Congratulations for the restoration. I also have one that I restored because it was from my late grandmother. At that time they were very common in Portugal, especially in fair traders who lived far away from home and the transport and roads were not the same as we have today. Made a good restoration now just preserve. Congratulations.
There is normally a top section diffusing dome shaped piece that has a set of small holes all around the sides and sits ontop. When burning the holes all have a characteristic little blue flame and the heat disperses like any gas ring burner. The jet directly below often blocks and the unit makes a ragging sound signaling the jet needs 'pricking' to clear it. You need a 'pricker' tool. In the early 1960s my mother could prepare a full hot meal on a single Primus unit for a family of six in times of emergency when electricity was out and we were in a wild winter storm for days.... Funny thing... the unit was already really old then & i still use that same unit myself in my shed to melt lead for fishing sinkers (but not to cook meals)!
Excellent .. We were used in the past in our old home .. The memories of extinct .. We Egyptians We consider an authentic part of the kitchen tools .. Everything has changed today.
There are a number of problems here. 1. The non return valve needs a lead washer and a rubber pip. 2. Use meths (denatured alcohol) to prime the stove and NOT paraffin. 3. Do not pump until the alcohol has nearly burnt down and the burner is hot. 4. The flame ring is missing from the top of the burner. This is necessary for correct operation. The flame should be burning clean and blue and should not blacken the kettle. Have you enlarged the hole in the jet to cause this I wonder? Whilst the cleaning is fine and the new legs work but PLEASE leave the assembley and operation to someone who knows what they are doing. I have over 45 years experience in restoring and operating these stoves and I wouldn't recommend your viewers follow this example of operating.
At least he shares his knowledge and efforts doing a video for all of us. Where are your videos? Instead of talking, maybe you could share.
Cool man. Now go make the effort of reproducing this video according to the way you describe and then come back.
It's a kerosine stove. You must preheat it with alcohol (spirit)(no soot). If the alcohol is burnt out. Then use the pump to pressurize the tank. The flame should be blue. Your yellow flame makes your saucepan very smoke black
Thanks
And carbon monoxide risk ⚠️ - incomplete burn
There are also 2 parts missing, there should be a steel ring on the burner to direct the flame. And a windshield to shield the alcohol from the wind.
@@estagoza This is a different burner without a ring which came after the one with a ring which also had a cup with perforations. It acted as a silencer. The one shown here makes great noise. Another part missing is a flat round base placed on the tripod to rest the utensil on. Some reservoir filler caps have screw-on covers under which a spare cap washer can be stored. It seems this stove also has this provision though the cover here has to be removed with a spanner instead of a screw-driver.
Yess u right, must be blue and powerfull,
Just bought this very stove, a gallon of k-1 kerosene (Or is it 1k?) & denatured alcohol. The stove cost $55.00 + tx. I have a sm wisperlite but dont want to be dependant on fuel cells. Cant wait to use it. Simple, reliable.
You should have bought a Primus spares kit which are cheap enough, all the seals you need including jet, pump leather, the pip for the NRV (no pip no pressure held in the tank). Outer flame rings are also cheap enough. Primus set the standard for these stoves and their spares are pretty much universal fitting many brands of stove.
Cantik dan menawan. Jadi terinspirasi untuk membuat kegaiatan yang sama. Thank you.
Wow, Dad and I never thought of using brake rubber caps as replacement for those rubber parts before! Nice idea!
And you shouldn't because the fuel will destroy it very quickly
@@timcatterall4445 What other option do you know of?
Bravo je prie pour vous 🙏😀👌🌹⛪️🕊❤️
أحسنت يا ... استاذ ... تحياتى لك
Good job!
عمل ممتاز صدق رجع احسن من الوكالة بس ناقص الحلقة الدائرية يلي بتعمل حصر للنار
ولما اشتغل مالو صوت وشيش والنار لازم لونا ازرق
محمد المصري لانو استعمل بدل النفط الابيض سبرت
ناقص الطربوش
مينفعش يضع سبرتو في الماكينة لانها مخصصة للجاز فقط
لان السيبرته لا يطلع في العالي لانه يحتاج قطعة من القماش او شريط للشتعال مثل السبرتاية لانه لا يتصاعد مثل الجاز
NC XXL هو كان لازم يحط سبيرتو في الصحن تحت رقبة الراس وبعدين يولع السبرتو حتى يسخن الراس كويس وبعدين يقفل الفتحة الصغيرة اللي تحت.الفتحة الكبيرة اللي من خلالها يملأ الوابور بالكاز وبعد أن يحترق كل السبرتو وقبل أن ينطفى يحاول يضغط الهواء بواسطة المناخ ويحاول أن ينظف العين الصغيرة بابرة الوابور حتى يزيل ا اي وسخ يعلق في العين وفي هذه الحالة يكون الكاز السائل قد ارتفع في الرأس وتحول إلى الحالة الغازية نتيجة سخونة الراس حيث يخرج الغاز من العين ويشتعل من خلال الراس. وإذا أراد أن يخفف شدة الاشتعال فيكون بواسطة البريمة الغيرة اللي اتكلمت عليها سابق. الملاحظ انه صاحب الفديو ما جابش سيرة البريمة واستعمالها خالص. وشكرا.
German equipments deserves restoration. Hatts off to you Sir.
My stove is identical to this, but is called a BAT, and was made in the GDR, it is my first project, thanks for the tips. Tony, Australia.
Чувствуется что человек никогда в жизни не видел работающий примус!!! Его надо НАКАЧАТЬ после того как стали вырываться языки пламени их разогретой горелки! и тогда уже начинать пользоваться! Фактически , примус это та же самая паяльная лампа !!! Я этими примусами пользовался до 1964 года, .. в Одессе на Молдаванке у нас газа не было примерно до 1963 года..Спасибо Хрущеву. Дали газ и нам...
Втулки нету сверху.
جيد جدآ درس مهم ومفيد أحسنتم
Nice Job. I've done 12 restorations now and all work superb. They burn hottet than any propane stove when you get them cracking
che meraviglia complimenti per il restauro
This stove lacks a loop at the top of the ignition zone to determine the ignition area. Also, press the air pressure piston 7 or 8 times or more to add air pressure inside the fuel tank. It will give you quick fire with a high volume and flame strength with the concentration of the ignition zone called {gouache or kosha}
I have been using it for 15 years
Old East German stove.. May not be as old as you think !! Top jet may need attention. That shuld be sounding like a jet engine running and with a blue flame. There is a real knack to getting these types of stoves going. Stones with gas canisters are better lol
Hermano saludos de Venezuela eso es un arte compartimos la misma pasión por restaurar
Bachpan mey Diwali mey hum aisey hi stove imli sey ghasa ke chamkatey they. Aur blue flame sey bartan kaley nahi hotey. Market sey hamesha stove ki 3 pins latey they. Primus to Microwave.
I have one of these at home. My dad restored it. But it's only for decoration. Very beautiful
Que maravilla cuando yo era chica mi mamá cocinaba con un Primus
Nicely restored, in fact, I too have a stove Swede Make, small scale restoration required, I purchased some 20 years back from a scrap dealer. N.C.Prakash, Mysore, India
محمد المصري
عمل ممتاز صدق رجع احسن من الوكالة بس ناقص الحلقة الدائرية يلي بتعمل حصر للنار
ولما اشتغل مالو صوت وشيش والنار لازم لونا ازرق
You should fill the ring with methylated spirit, and light, so that when the paraffin passes in the lower loop it vaporises, when its working properly it will roar and a blue flame will be seen, this one is burning liquid paraffin, its not hot enough
Great job. I realy appreciate such smart hard work..
This stove says Made in GDR , East Germany.
Primus is a Swedish company and as I know never had manufactoring in GDR.
So its an GDR brand stove , not Primus.
Exactly. It's not at swedish stove. I have my own Primus, Radius and others. Look att my youtube page and see my stoves burning.
It's a "Primus-style" BAT stove.
Nicely improvised valve removal tool too but not enough preheat or pressure with the cooking. That's a roarer-type burner - they're called that for a reason!
at the first look, i thought DDR 😅
No idea about BAT that is a new name for me. I have a Barthel Juwel, manufactured in Dresden, former DDR. Burner looks like the Swedish SVEA CBEA one that I have on mine.
Burner flame cup missing. The top flame cup would make the red flame into blue flame making optimum heat. Red flame would make the utensils black at the bottom side. Anyway very good video. I have small sized Primus stove (Made in Sweden)
Very good restoration. But the flame is symmetrical around the burner means appears only on one side of the burner.
Wah keren
Not the best in restoration or results, but a good effort. Worth a peep.
bom trabalho de restauração pena que aqui no Brasil não se achá peças como essa manda maias videos um abraço Eduardo do BRASIL
Soak in white vinegar then Bi-Carb to neutralise the acid then polish... you did a good job of wreaking this stove...
Restoration??
Are you sure?
The end result is not what it seems.
I got one of these passed down to me a few weeks ago. Still in its tin
Great work, Bravo.
Love the work but reckon braising would look better then solder
عمل ممتاز 👍👏👏👏👏👏
Hats off to you Sir.
It would look even better if you removed those copper tubes off of the sides, cleaned up the excess solder, then make a stand to put the burner into and include the three pieces that you beat out straight on your anvil. If you have a welder available somewhere you could use that to make a triangular stand of some form including your pot stand pieces you made.
Good work, but the ignition process is not right. The flame must be blue and sound
جيد جدن احسنت
Very good my friend!!
Just restored mine and watched this to realise I have the same one except its a silent burner, had to machine a new protection cap for the burner
buen trabajo. lo felicito. Voy arreglar el mio. me basare en su trabajo.
Nice old piece from the former East Germany. Good job.
Thanks
Well done bro!
WELL DONE. The flame was not correct. You need to find a needle to clear the jet.It should be blueish as I remember, (nearly 70 years back) and this type of head made a lot of noise. The quite head had a top with lots of peripheral tiny holes. Once as a child I pumped so much to get some heat out of it I blew the bottom off. Regards and you have my subsription.
Can imagine camping having a conversation just to hear jet taking off behind you
فكرتنا باحلي ايام العمر عمر الصغر ووابور الجاز ابكيتني
We have an old one but it still work.. but the fire should be stronger and the fire sounds also...
Very good
Listo para el museo en Uruguay
Need to clean out the nozzle again and add more pressure. That thing should sound like a jet engine, with no yellow flame.
nice cleanup, however you didn´t light it rigth, the flame should be blue.. or maybe it´s missing the control valve to regulate the flame.
brakuje na górnym pierścieniu tulejki kierunkowej mieszającej gaz z powietrzem. szczelina pomiędzy główką palnika a tuleją powinna mieć około 4 mm i nie wystawać poza pwierzchnię palnika
You need to pump it more before trying to use it. This type of burner is often called a “roarer” burner because when is burning properly, it makes a very audible noise. You did not get that far.
جميل بس هذا متوفر بكثره بمصر
وحتى يصنعوو منه بكثره هم اعرف منا به
تحياتي لام الدنياا وللجميع
i DO NOT KOW WHAT ARE YOU USING AS FUEL BUT THE FLAME SHOULD BE MORE BLUE AN MAKE MORE ROAR APART FROM THAT ITS A FANTASTIC RESTORATION THANKS FOR SHARING !
Linda reliquia te quedo como el primer día
To restore is a very good thing and you did good; you could have done much better. keep the good work...
Es un buen sistema ,teníamos uno igual ,que funcionaba con petróleo ,era rápido y potente ,calentaba mucho y era muy practico ,claro ese petróleo ,ya no se fabrica ,que yo sepa ,enhorabuena por el vídeo desde Bilbao España ..
Genial...Bravo....Chapeau....👍👌👏
I have one like this and it works well for me
I have a kerosene blowtorch by Clayton & Lambert from the year 1921
كتير حلو بس لازم ضغط النار يكون اقوى
You forget to put burner ring on..😁
Не хватает одной детали, для правильного горения. С верху на горелке должна стоять втулка. Плямя будет синим, копоти не будет.
Awesome man.
My family have one before sixty years ago and i bought one new to useit in 1983 during the iraqi irani wor its fantastic stove i love it and i love your work but why you didn’t use gloves to protect your hands
هههههههه تذكرت هذا عندما كان عمري 4سنوات يعني من 32سنه
hhhhh I remembered this from 32 years old when I was 4 years old
That the fire is stronger than that and fast and its strength has a voice you should press to continue to pump liquid gas
@Leo Life صح 😄
تذكرت هذا وعمري اربع سنوات قبل خمس وخمسين سنه ايام جميله
@Leo Life وفي المطبخ ايضا ونسميه في الاردن بابور او بريموس
احسنت صنعا هذا جميل جدا
Pressurise the kerosene fuel with the pump handle, adjust to a blue flame. Knew these well as a kid till the died out for some silly reason? They were great, and the fuel also worked in your trusty lantern. Camping was so much fun using these alternate technologies. It made it exotic to be independent in the middle of nowhere. 500ml of kerosene went a long way and the odour of these devices burning was somehow very masculine in my mind.
Can't really describe the feeling using something like this than conventional gas, like just starting a small fire with kindleing, know how many hours 500ml would last?
هاذا اسمه ببور عندنا بسوريا وبعض الناس تستخدمه للطهي جيد هاذا العمل
Ver esta cocinita me trae mucha nostalgia
Good afternum my friend
You have to pressurise the stove first then set a light the cup to preheat the burner
Wow, amazing.
😉😘👍🌹
An antique that has experienced vicissitudes of history has been destroyed.
Del tiempo de mis tatataratataraabuelos
Good to see the stove come alive, nice work . ... though the burner hole needs to be cleaned with a pin type attachment. The flames are yellow due to the earlier soot in the hole . Also you need to pump up the primus consideribly more.
Извините это не реставрация, а просто почистить и собрать, но за работу лайк
Good job. Wear some protective gloves while using the wire brush.
opportunity to restore a gem lost, you could have done such an amazing job with it you however for some reason didn't
,,
"Не шалю, никого не трогаю, починяю примус..." (с)
It needs to be pumped till you get a blue flame. Also the burner ring is missing. It directs the flame upwards towards the vessel.
He need to take some tips from Indian womens who are more experts in this...if i put a video of them may be i will gain veiws in millions.. Right bro😉
@@ibrahimsahibole6617 many Indian men like me know how to operate this stove too.
the legs has to be one piece this way they don't wiggle when you put the pot and you pump it good until you can't pump any more before you pot the pot then there is tool for the head where the kerosene coming out very small injector we call it needle to clean the injector every time you use it and another part are missing from your stove its the hat on top of the head this way spread the fire
i enjoyed
Bravo 👍😊
Awesome restoration ...I also have same stove ...I also have a top of the stove 👍
Очень нехорошее пламя получилось! Должно быть синее и примус должен работать с шумом, как реактивный двигатель!
thank you good work
Not bad work, but there must have been a way to lessen that big solder patch. I think the way to handle it would have been some of that inside the tank coating they use when making or repairing motorcycle gas tanks. Will keep it from leaking without huge patchwork. If that brass was too thin to braze, then that's the only way I can think of to lessen the patchwork. Of course, you could have plated the whole thing to achieve a more consistent look, but then again, wouldn't that be going too far for such an item? Probably. It works, you don't need it to do more than that. Oh, you can use high grade alcohol as fuel completely, it will work and burn clean.
That thing remembers me a very nice time in my life,when my mom works it ,,the sound of it makes me want to sleep , t was 7 years old hhhhhh