Some bad luck with his tool cart
Вставка
- Опубліковано 7 лют 2025
- Caleb is a down to Earth heavy diesel technician that works hard and is proud of what he does. Wrenching since he was only 8 years old, he knows exactly what he's doing. It was awesome being in the shop, and I couldn't be more thankful for the opportunity Caleb offered me to check out his toolbox and tools. If you enjoyed the tour that Caleb took us on, give this video a Like!
Here are some Amazon Affiliate Links for some of the tools in the video. As always, prices fluctuate, so prices posted in the video are from during filming.
Milwaukee Work light - amzn.to/3SRcv2S
MAXXEON Cyclops Work Light - amzn.to/3GcJpnd
Streamlight Wedge - amzn.to/3QOOWoN
Streamlight Strion - amzn.to/40QdmCW
Streamlight Stinger 2020 - amzn.to/46HjuyZ
Milwaukee Grease Gun - amzn.to/46r0zYX
Hose Puller & Quick Release Plier Set - amzn.to/46zQzgc
Milwaukee ½” High Torque Impact Wrench - amzn.to/3MWEGK9
EZ RED Extendable Ratchet Set - amzn.to/46xsUNf
LAUNCH OBD2 Scanner - amzn.to/47pC93t
OTC Torx Set - amzn.to/3N02b57
DISCLAIMER
Pricing listed on this video is Suggested Retail Price. Prices may vary from dealer to dealer. Not responsible for typographical errors. Pricing may not be the most current.
The views and opinions expressed in this program are those of the speakers and do not necessarily reflect the views or positions of any entities they represent - whether it be the shop, brand, or dealership.
4 Reasons I Love This Channel
1) Consistency in Uploads
2) Genuine Excitement about People’s Setups
3) High Production Value and Great B-Roll Footage of Mentioned Tools
4) Product Model Numbers and Pricing in Corner
I feel that these are the reasons these toolbox tours are superior to others on UA-cam.
Thanks so much for that. I try to make the best videos I can, so I’m glad it doesn’t go unnoticed! Thanks Joshua!
Agreed. My only argument is a selfish one in that I want even more uploads! This channel rocks!
@@Chilly-uq2zlagreed. I can’t get enough. I could watch these all day long. 😂
You are correct on all points. No notes.
I agree too, I love this channel. GOOD WORK @ToolBoxTour
Every time I see a box in Matco purple it takes all of my attention. What a color.
Yeah I love it! Thanks Mark!
i don't even own a tool box and this purple tool box is giving me ideas. Beautiful !
Just don’t get a Matco
I just bought a craftsman, I did not need a big box and it was one of the best buys of my life
I know that i will never update my tools or toolbox. But i truly enjoy watching your videos.
I get it bud. I’m a small engine tech. Can’t really justify the nice expensive boxes.
I’m really glad you enjoy watching!
@@F.Palmer You have to invest into your future and learn how to fix electric powered equipment and sell your own. There's a lot of demand out there for you to find.
This guy keeps it 💯!! You dont need fancy tools, harbor freight is not bad and they work just fine!! He only has what he uses and doesnt buy tools just because.
With that logic, why have a 23k box? Tools make money your box doesn't make money
@@Genny2494I imagine tools make you more money when they’re not stolen. They also make you more money when you can fine them and don’t have to spend half an hour rummaging through a pile of crap
You must have missed the $400 set of 3 hammers in a blow molded case. Who in their right mind would pay that much for hammers.
I love the anecdotes from the techs just as much as their toolbox tours. They all seem to be very good, hard-working, and honest people. Caleb's tools and his cart has definitely been in some battles! Thanks for another great toolbox tour!
I agree! I love meeting them every time!
I think you just found your new hand model.
Dudes got wicked presentation game! Pulled out all the tricks today. Light flips, wrench flips, the razzle dazzle!
I need that funnel holder. This channel is head and shoulders above the kthers because you don't have to rummage through the comments to find a product code or something
That color combo is perfect!
8:04 is a great solution for refilling the grease gun! This should be a built-in manufacturing feature.
Favorite channel on UA-cam, love checking Thursday Friday for new videos weekly lol.
I’m glad you enjoy them! Thanks Zack!
4 years in the diesel industry and i have NEVER lost a tool. Magnet trays go with me everywhere.
The hypersteps are great! And yeah they don’t warranty the smallest row of bits but each bit in the row is less than $10
Good to know!
14:49.. I have the Pittsburgh set of these.. some of the very first ratchets I bought ~15 years ago.. same mechanism as these.. I've obviously upgraded a lot of my tools since then. But I still have these. And I also have my Pittsburgh large combination wrenches too just like this guy. If the stuff works no reason to get rid of it....
Have been watching your channel for a while! Love the vids and I definitely have a tool collection I wouldn’t mind showcasing!
I’d love to see your setup! Hit me up on instagram @toolboxtours or send me an email toolboxtour@gmail.com 👍
@@ToolBoxTour sent you an email
It's a great channel. Enjoy seeing how the guys in the field have their set ups, and their daily set up dollies as-well-as, seeing some of the guys with a mobile set up that they hit the road to do a service call with, could be in the middle of a farmers field 😃
I’m glad you like the channel! Yeah mobile sounds kind of wild. You never know what your getting in to
Great video. Thank you for the work you put into these. I seriously look forward to it every week. 👍👍👍
Thanks Ryan!
Nice set up, thanks Caleb for the tour. What I like about this channel, is that I see tools I may have not known existed, and you show details about them. Thank you for the work that goes into this.
I used to own a fleet of trucks. Some had those push to release air line fittings. Like Caleb said, dirt and such will prevent them from coming apart. YEP! I ended up changing them to old school compression fittings. I wish I knew about these tools back then.
If you borrow it more than once, you buy it!
The best channel on UA-cam. Keep up the good work brother
I appreciate that!
Always like your content. Can appreciate the work you put into editing.
Thanks chris, I appreciate that!
I like Mac tools. Ever since I’ve been buying from them i haven’t had no issues. A lot of times it depends on who the dealer is and how there attitude is towards the mechanics.
Another Great toolbox tour!
Thanks! I’m glad you liked it!
This channel rocks! My favorite on youtube!
I’m so glad you enjoy it! Thanks!!
Finally a box tour where the tools actually look used lol
I work for the same company As Mr. Caleb. Come to the east coast, I’ll show you an unorganized, well used tool box and cart by the current #2 tech in the company.
I’d love to see that setup! Hit me up on instagram @toolboxtours or send me an email toolboxtour@gmail.com 👍
That shop is clean af.. I wish my shop was that clean. I absolutely hate the guys who will change a hydraulic line and leave 8 litres of oil on the floor that I’ve either gotta lay in or clean up.
Yeah it really was super clean all around
Owww🙌🙌 another sweet vid to watch after barn work!🤟🤟
I did a swap for a set of Quinn screwdrivers to the Cirnewell guy in September. Gave him a brand new $9.99 set for the Cornwell's at $89.99. 10pc set, sweet deal IMO.
Hell yeah! Can’t beat that deal!
Screen shooted a couple of those tools, cause i need them for my work
Come to Las Vegas to record some tool boxes !!
I’d love to! If you have a cool setup, hit me up on instagram @toolboxtours or email me toolboxtour@gmail.com
Nice set up!
The tool company makes the tools, the dealer makes to warranty work. I agree on drill bits MAC Cobalt are the only ones I use, no one can touch MAC'S all inclusive warranty
Yeah that’s hard to beat
saw the penske patches in the top, cant tell if he is still in a penske shop but let me tell ya the road calls we get can be kinda fun. but yeah drag EVRYTHING you possibly can becuase you never know whats actually wrong. 24/7 and drivers are wrong 90% of the time.
Yeah I was surprised when he said he brings his entire cart
@@ToolBoxTour my shop only allows company supplied boxs but I have 3 packouts and 2 bags to load up for my calls
10:55 "She's old, but she does the job" 🤣
I dont understand having 23k tool box and then having 24 dollar wrenches
Those mac wrenches he had are $329 just for 6-19
I love your videos i not a mechanic and i want to buy tools and i know i don't needed.good job
Haha the tool addiction is real!
Why does no one have a power probe. That thing was a must. I’m still rocking the 2.
I use the 3 but yeah I absolutely still use mine!
best vids ever
Hey thanks!
Getting rid of my snap on 3 bay master series to get a matco s 4 3 bay
good thing he has harbor freight things but, if a tool breaks and you picked a good brand at harbor freight you should be able to warranty it 😊
try get into a suspensions technician tool box for an motocross workshop or race team :D
Slick mark of sacrifice tattoo
Damn 20k and it lives at work
i love watching your vids man! but i just absoulty hate those matco step drill bits!! i was so excited at first buying them for 400 bucks i thinking i had the best bits in the world! lol.. i literally got one use each of each of the drill bits.. its so messed up and a let down. and sadly i dont have a matco truck anymore the guy up and quit with no warning! so now im stuck with maybe 4 drill bits that still work haha.. ive seen some mac drill bits that are just normal and not hyper step. and man ill tell you what the are amazing! they shred some metal i swear.. anyways! i am going to make me a tool box tour vid this week! i hope i do well with it and people enjoy it as much as i enjoy theirs!
Everyone talks them up so much! Thanks for your input!
man yea absolutely!!@@ToolBoxTour
Where are you located? Fresno is like 45 min from me! I’d love to do a box tour
I’m in Utah haha ✌️
Ive NEVER NEVER seen USB rechargeable individual batteries. Thats INSANE
NEVER will I spend 23K on a box! 🤦🏾♂️🤦🏾♂️🤦🏾♂️ Been in the game 20years n learned early there is no justification to spend so much on a box other than sending your tool guys kid thru school! Spend on tools.
I bet he didn't full list
Whats the point you want to make ?
My dad still has his from decades ago, and I plan the boxes I buy around the fact that when he retires I will get his 72 inch box with a hutch. Don’t judge people for what they buy man.
I think your on the wrong channel little buddy
MAKE MORE MONEY
Nice set up cost a pretty penny I bet
👍👍‼️
It’s never good to have empty drawers. That’s an excuse to buy more tools.
The best excuse 😅
first lol love your videos
Thanks!!
A $20k box while using Pittsburg wrenches, wuuut the fuuuuu
Lol. I have to disagree with losing tools. They cost too much to misplace them.
That's a cool box but I bought my daughter's Mom a new HRV for that price
Haha yeah the price of boxes are insane
I love these videos but I think 12-20k boxes are useless. I have a husky box and a harbor freight roll cart and I have every tool I need. The snap on truck has no appeal to me
If you borrowed it twice third time you’re buying it.
Still trying to understand how these guys justify the box prices to their wives.
I see Matco cheaped out on the back of that hutch.
Why doesn’t he have any tools?
He does
That box is wAy overpriced 🫣
I got snap on 72” classic. I paid 6,500$ on sale. 16k for Matco?????? I hope matco dealer used lil grease when he sold it to this guy. I bet that was a payment plan that sold the deal, cause you couldn’t come up with that much cash for box like this up front.
I paid 6k for my 72” Krl master series brand new off the truck which was 5 years ago. This is a 6s Matco basically the same sell point as a master series . A classic 72 is not as deep nor as tall. A 84 in epic now my dealer wants 22k for it. Took boxes are definitely over priced now days but don’t compare this box too a classic series snap on.