I am 100% going to save this for later because I use a ps3 and started looking into jailbreaks due to the hinderances people in a spider-man craze have on the ps3 now. I definitely need to look into the game file options more beforehand as my main concern is the dlc add ins that are no longer available. If you know a link or something that could help that would be fantastic!
Hello, I'm seeing a lot of pages that are telling me that my super slim (4001c) is not able to be jailbroken, yet you say that you're jailbreaking a super slim during your video. Could you take a stab at explaining why this might be? If you foresee an IP problem, I'd love if you could recommend some sort of setting to make this a bit safer for my system; I obviously don't want it to brick.
great video , i installed 4.90.1+hen3.2.2 ON MY 3004 PS3 SLIM BUT PLEASE? USE THE ORIGINAL PS3 CONTROLLER TO INSTALL THE HACK. I USED THE ARDISTEL WIRED PS3 CONTROLLER AND EVERYTHING WENT TO HELL. PKG LIKE WEBMAN IRISMAN OR MULTIMAN FAILED MULTIPLE TIMES TO INSTALL AND RECURRENT FREEZES . SO I INSTALLED EVERYTHING AFTER FORMATTING THE PS3 HDD USING THE PC +LOW LEVEL FORMAT VIA THE HARD DISK LOW LEVEL FORMAT TOOL +MINITOOL TO GET THE HDD IN MBR AND FAT32 FORMAT USING THE ORIGINAL PS3. CONTROLLER CONNECTED VIA USB CABLE (BATTERY DEAD) --> EVERYTHING WENT SMOOTHLY + NOW WEBMAN RECOGNIZES EXTERNAL NTFS PENDRIVE LOADED WITH PS3 ISO BACKUPS FROM MY PS3 LIBRARY. AGAIN A SUPERB TUTORIAL
I use to have this problem back in the day. I guess it depends on what brand of usb. But the problem i was having no files were showing up. So what I did was remove everything out of a folder, then my ps3 was able to find the files.
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that. 1. Have controller plugged in USB 1. 2. Press PS button, Start + Select. It will begin searching for the update. 3. Hurry and unplug the controller and put the USB into port 1.
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that. 1. Have controller plugged in USB 1. 2. Press PS button, Start + Select. It will begin searching for the update. 3. Hurry and unplug the controller and put the USB into port 1.
I have always been courtious about jailbreaking my PS3. Is this HFW Hen similar to PSP CFW where every time you turn the console off, it needs to be renabled? And can you, if needed, revert back to stock firmware without bricking the system? As you said that it will disable Blu Ray media. Is that movies and games or just movies?
Yes, every time the PS3 boots HEN must be enabled. There are a number of ways to get a PS3 back to stock after having HEN installed none really pose a brick risk. And yeah only movies get disabled by this update by default. Hoping to put out a vid on restoring Blu-Ray playback soon!
Each time I try go to 'Update from Storage Media' I get a 'No applicable update data was found.' The device has definitely been detected and the firmware is up to 4.90, unsure what the issue could be with that.
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that. 1. Have controller plugged in USB 1. 2. Press PS button, Start + Select. It will begin searching for the update. 3. Hurry and unplug the controller and put the USB into port 1.
Hey listen you probably won’t check this but I did a stupid mistake and clicked reset on the xploit page after constantly having to reinstall the update and now the page just won’t start the hen download and the update won’t actually enable hen? Any Suggestions?
Can you use all of this offline as well? before i start jailbreaking considering i've never done this before and i just want to use it offline all the time. I'm on 4.82
So I have a 4.90 slim that has connected to psn servers without any JB previously. I am just curious to know if it's safe to JB the console still. I plan on playing some of my owned games then JB so I can play some stuff I don't yet own
You are the best! You know how to fix the renew license that comes when I try to start any PSP Launcher? I tried all of them I mount the PSP game and everything but nothing... I'm on Hen490💪
HEEEEEELLLLPPP! I've tried EVERYTHING to get "Masquerade The Baubles of Doom PSN" to work on HEN 4.90 PS3. Does anyone have a solution to the License??? I've tried copying the EDAT file over using multiman and resigning but no luck. I've got it working on my FAT PS3 4.82 REBUG but my son's PS3 I just can't get working. Thx in advance!
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that. 1. Have controller plugged in USB 1. 2. Press PS button, Start + Select. It will begin searching for the update. 3. Hurry and unplug the controller and put the USB into port 1.
hey i subbed got everything running so when i boot up y ps3 enable hen do the custom firmware delete then switch to my main psn account for online and play all the games? i need to know the rules i dont want my main account get banned
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that. 1. Have controller plugged in USB 1. 2. Press PS button, Start + Select. It will begin searching for the update. 3. Hurry and unplug the controller and put the USB into port 1.
So I this is my first time looking into this, but after I instal hen then what do I do to get closer to being able to put menu for bo1 I’m just lost I know I prolly sound dumb but I need help!
In-depth webMan video would be awesome!
Hoping I can make some progress on it soon
A few hiccups, seems to says “no media found when trying to install even tho I done it in the correct folders
This is my first time ever doing a mod, you made it pretty easy and streamlined. What did you do to update the retroarch screen?
Settings/drivers/menu/ozone 🎉
@@ArchadesGames Thanks
Can you play ps2 games using retroarch and webman?
@@christianclanton9992
Ty for this upload. A few hiccups but it worked.
I am 100% going to save this for later because I use a ps3 and started looking into jailbreaks due to the hinderances people in a spider-man craze have on the ps3 now. I definitely need to look into the game file options more beforehand as my main concern is the dlc add ins that are no longer available. If you know a link or something that could help that would be fantastic!
HANK YOU SO MUCH it was easy and straight to the point
Happy gaming!
THANK YOU SO MUCH YOU ARE A LIFESAVER 😭😭😭
Happy gaming
When we click system update they show nothing
Thanks a ton, very clear guide and very helpful
Did it work?
Happy gaming
@@ArchadesGames does this still works
Yes
Awesome Video! thank you!
this actually worked appreciate it
Happy gaming
After installing and enabling HEN Package Manager doesn't appear. Any suggestions?
Hello,
I'm seeing a lot of pages that are telling me that my super slim (4001c) is not able to be jailbroken, yet you say that you're jailbreaking a super slim during your video. Could you take a stab at explaining why this might be?
If you foresee an IP problem, I'd love if you could recommend some sort of setting to make this a bit safer for my system; I obviously don't want it to brick.
God 2 videos! Video 1 : check
Woot!
Cool, I need a spare PS3 now. Any guides for doing this on a PS4?
Hoping to get one done soon
great video , i installed 4.90.1+hen3.2.2 ON MY 3004 PS3 SLIM
BUT PLEASE? USE THE ORIGINAL PS3 CONTROLLER TO INSTALL THE HACK.
I USED THE ARDISTEL WIRED PS3 CONTROLLER AND EVERYTHING WENT TO HELL. PKG LIKE WEBMAN IRISMAN OR MULTIMAN FAILED MULTIPLE TIMES TO INSTALL AND RECURRENT FREEZES .
SO I INSTALLED EVERYTHING AFTER FORMATTING THE PS3 HDD USING THE PC +LOW LEVEL FORMAT VIA THE HARD DISK LOW LEVEL FORMAT TOOL +MINITOOL TO GET THE HDD IN MBR AND FAT32 FORMAT USING THE ORIGINAL PS3. CONTROLLER CONNECTED VIA USB CABLE (BATTERY DEAD) --> EVERYTHING WENT SMOOTHLY + NOW WEBMAN RECOGNIZES EXTERNAL NTFS PENDRIVE LOADED WITH PS3 ISO BACKUPS FROM MY PS3 LIBRARY.
AGAIN A SUPERB TUTORIAL
I have the files on my USB but my PS3 says there is no applicable data. What could I be doing wrong
I use to have this problem back in the day. I guess it depends on what brand of usb. But the problem i was having no files were showing up. So what I did was remove everything out of a folder, then my ps3 was able to find the files.
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that.
1. Have controller plugged in USB 1.
2. Press PS button, Start + Select. It will begin searching for the update.
3. Hurry and unplug the controller and put the USB into port 1.
I tried putting and ps3 folder to USB and I put the USB into the ps3 and update, and I got this error "No Applicable Update Data Was Found"
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that.
1. Have controller plugged in USB 1.
2. Press PS button, Start + Select. It will begin searching for the update.
3. Hurry and unplug the controller and put the USB into port 1.
谢谢，很有用
in recovery I just get checking... please wait and it hangs, what am I doing wrong? followed everything.
I have always been courtious about jailbreaking my PS3. Is this HFW Hen similar to PSP CFW where every time you turn the console off, it needs to be renabled? And can you, if needed, revert back to stock firmware without bricking the system?
As you said that it will disable Blu Ray media. Is that movies and games or just movies?
Yes, every time the PS3 boots HEN must be enabled. There are a number of ways to get a PS3 back to stock after having HEN installed none really pose a brick risk. And yeah only movies get disabled by this update by default. Hoping to put out a vid on restoring Blu-Ray playback soon!
What Oder do I put the files in the usb
@@ArchadesGames ?
Doesn't matter
@@ArchadesGames just did it thanks man, never done anything like this but with your video it was east downloading retoarch as we speak!
Each time I try go to 'Update from Storage Media' I get a 'No applicable update data was found.' The device has definitely been detected and the firmware is up to 4.90, unsure what the issue could be with that.
Same problem
Did you check the folder paths are correct?
@@ArchadesGames I feel like I put them all in the right places but I can always attempt again to make sure
Never hurts to double check. Also, have you tried the recovery menu?
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that.
1. Have controller plugged in USB 1.
2. Press PS button, Start + Select. It will begin searching for the update.
3. Hurry and unplug the controller and put the USB into port 1.
What did you use to open the files for the retro arc and webman mod?
Hey listen you probably won’t check this but I did a stupid mistake and clicked reset on the xploit page after constantly having to reinstall the update and now the page just won’t start the hen download and the update won’t actually enable hen? Any Suggestions?
Can you use all of this offline as well? before i start jailbreaking considering i've never done this before and i just want to use it offline all the time. I'm on 4.82
So I have a 4.90 slim that has connected to psn servers without any JB previously. I am just curious to know if it's safe to JB the console still. I plan on playing some of my owned games then JB so I can play some stuff I don't yet own
im not sure what im doing wrong i install the pokg for webman but after installing it the stuff you show isnt there
Hey there! thanks for the video it was excellent!!! I played all night🤘 BUT today when I try to open RetroArch it won't start I May missing something?
You have to enable hen every time you boot the PS3
You are the best! You know how to fix the renew license that comes when I try to start any PSP Launcher? I tried all of them I mount the PSP game and everything but nothing... I'm on Hen490💪
I haven't messed with any of the PSP stuff in years so not sure about that at the moment.
I cant see the package manager folder
Where are the files and how would I fix Blu Ray playback?
HEEEEEELLLLPPP! I've tried EVERYTHING to get "Masquerade The Baubles of Doom PSN" to work on HEN 4.90 PS3. Does anyone have a solution to the License??? I've tried copying the EDAT file over using multiman and resigning but no luck. I've got it working on my FAT PS3 4.82 REBUG but my son's PS3 I just can't get working. Thx in advance!
Update via inter is not showing the update. Help pls.
When i press L1 the Modman doesn’t start downloading?
when trying to install webMAN i get (an error occurred during the install operation 8001003A)
my ps3 seems to not like the link an provides me with "error loading this page" what can I do to bypass it or what am I doing likely wrong.
After installing webman mod why is it goes black screen? Btw I'm using ps fat
data is corrupted it says when i try install through the recovery method
Download it again
Every time I Restart my ps3 to download hen it always says I have to restart it again and again
It can happen
my shit stuck in recovery mode at
"Checking..."
"Please Wait"
please help me
Double check the USB drive is in FAT32 and the folder structure is right
it didnt work
Doesnt work on ps3 super slim 4xxx, never mind, i got it
Same process with mobile??
16:15 when I got to this part of downloading, it kept crashing on me.
Wait never mind I got it, I just needed to remove the game i had in the ps3
Happy gaming!
What do I do if the hen installer just is a white screen
Try again
am i able to use a playstation 5 controller / playstation 4 controller to do this ?
Not if you have to use the recovery menu method.
My PS3 is not accepting the upgrade firmware, and it says:"No applicable update data was found" (PS: I'm on super slim)
Usually a problem with your USB/path setup
same have super slim an it doesnt se the update also tryed recovery mode have 4gb sandisk usb drive
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that.
1. Have controller plugged in USB 1.
2. Press PS button, Start + Select. It will begin searching for the update.
3. Hurry and unplug the controller and put the USB into port 1.
i enabled hen twice now the fans are haywire
Because it increases the default speed to keep the system cooler.
@@ArchadesGames i turned the fans down but thanks
hey i subbed got everything running so when i boot up y ps3 enable hen do the custom firmware delete then switch to my main psn account for online and play all the games? i need to know the rules i dont want my main account get banned
Boot the secondary account enable HEN. Choose game in webman. Clear history and sys calls. Switch to main account. That's my process.
@@ArchadesGames hey man new update 4.91 do I wait do it on xploit?
Wait for the new version of hen to come out yes
My ps3 wont show my usb? i've formatted it to FAT32? Any help will be great. Cheers
Try a different drive
I did this and it worked. You have to be fast, but I had the same problem and it read it no problem after that.
1. Have controller plugged in USB 1.
2. Press PS button, Start + Select. It will begin searching for the update.
3. Hurry and unplug the controller and put the USB into port 1.
Hi friends!
Can I do this with my PS3 Super Slim CECH-4204C Date Code 3B?
Yep
Do I need to use bgtoolset for this update?
Not unless you want to I guess. It isn't needed for the install. Just make sure it is a proper version unlike the broken ones for 4.89
The page got suspendet!
Go check the status page linked in the description
So I this is my first time looking into this, but after I instal hen then what do I do to get closer to being able to put menu for bo1 I’m just lost I know I prolly sound dumb but I need help!
Does it work on superslim
Yes
But can i use a pc joystick though
It dont work , fake news
🤡
it does work i just did mine today super easy super slim model
@@JimmyKudo93 which version do you have?
NVM IT WORKED
i plugged it out and i tried to instal it again but it said error cannot start application
Same how did you fix it could you tell me please?
Nevermind I needed to click hen again
how long is it meant to take to install web man mod??????
Like 2 minutes
i held down l1 and pressed on the web mod and its made my screen black what do i do
my screen is still black what the heck do i do
Turn it off and back on and try again
@@ArchadesGames it wont let me turn it off when i press the button
Unplug it
Couldn't you just install Evilnat 4.90 cfw and not break your blu-ray drive?
Only phat and early slims have full cfw capability.