2019 Sunday Soundwave V3 Bike Check - Brant Moore
Вставка
- Опубліковано 8 вер 2024
- A unique bike check for a unique bike.
Here is my 2019 Sunday Soundwave V3 build.
Huge thank you to all of the people who help make this bike what it is and the biggest of shout outs/thank you's to Phillip Ranalli!
Frame: 21" Sunday Soundwave V3 Surf Blue
Fork: Odyssey R32
Bars: Nowear BMX Street Treats 9"
Bar Ends: Metal Bar Ends From 2006
Grips: Odyssey Tom Dugan Signature
Brake Lever: Odyssey Monolever Medium
Brake Cables: Custom Upper/Lower Cables 1.6mm Inner
Gyro: Odyssey GTX With Screws
Stem: Alienation Vault 53mm
Brakes: Shadow Drew Bezanson Signature
Brake Pads: Odyssey Slim By Four
Headset: Odyssey
Front Wheel: Alienation Felon / Profile Totem / GSport Hubgaurd
Pegs: 4.5" Odyssey Jpeg Longer
Bottom Bracket: Odyssey 22mm Mid
Cranks: Odyssey Thunderbolt+ 175mm RHD
Pedals: Shadow Metal Pedals
Sprocket: Sunday Knox 28t
Chain: Odyssey Key Chain Hollow
Seat: Odyssey Monogram
Seat Post: Alienation Long Post
Seat Post Clamp: Sunday
Rear Wheel: Prototype Alienation Vanda l/ Profile Totem
Rear Hub: Profile Totem / Chromoly 9t / Solid 14mm Chromoly Axle
Tires: Odyssey Aitken 2.25 Front/Rear
Nowear BMX | Alienation BMX | Part Tool | Brimstone Bicycles | Full Factory
Check out my facebook page for a photo gallery of this bike build.
Thanks for watching! If you enjoyed the video, let me know in the comments below and if you’re new, please consider to like favorite and subscribe!
Consider Subscribing - bit.ly/Brant_Moore
Support The Channel T-Shirt Shop - teespring.com/...
Equipment - www.amazon.com...
Instagram - / brant_moore
#bikecheck #bmxbikecheck #sundaybikes
Brant, you are a great ambassador for bmx and all of the businesses that work with you, and if other "pro" riders were as humble and accessible as you are to everyone, bmx would be all the better for it. Glad to be a part of what you are and do!
Be the change you want to see in the world, right?
Thank you again!!
We have a lot of the same parts and this is the sickest bike check I've ever seen
That's awesome! Do you love your bike as much as I love mine? haha
Thanks so much man! Hope to see you in the comments again
Your videos are some of the most helpful bmx videos i've seen. Just wanted to say thanks. I usually trail ride but at 52 decided to buy a bmx bike. Your videos got me kick started. Be well
Thank you so much for the feedback! I work hard to make the best videos I can and to hear that definitely shows me it’s paying off. So I appreciate that, and I hope that you love BMX just as much as trail riding!
Nice edit for a bike check and some nice tricks thrown in. Dig it.
Hey thank you!
@@Brant_Moore maybe when my hand is healed from getting screws put in, I might bump into you at Ray's. I'm up in Detroit.
A bike check as bike checks should be. I like how you actually zoom in on the part you are talking about...not just pointing to it from 10' away.
Haha wait you mean doing it from 10 feet away isn’t the best way to do it?
Thank you man!!!!
Nice, your a master doing stalls never seen anyone doing those kind before
Thank you man! Just being myself!
Sick build. I just got to riding again after 12 years off. I'm putting together a dual cable/London mod setup.
Thank you, that’s awesome! Bmx is the best, glad to hear you’re getting back into it
Brant your crazy. Nice rig. Keep em' coming!!!!!
Thank you! Doing my best to bring new videos every day!
So fresh!
Thank you!! Im in love!
Cool bike bro!!👽👽👽
Thank you!! I love it!
Such a rad bike check man!
Thank you!! It was fun to make
Best bike check ever
Nasty style
Thanks man!!
You’re so damn creative I love it. I can’t wait till I meet you. Btw that’s the cleanest sound wave I’ve seen in a looong time
Thank you man, it’ll happen one day!
Keep killing it!
Some seriously clean stuff my dude!
Thanks man!!
you have imprssive skills my man, oh and of course a nice bike!
Thank you so much!! It lets me have fun at max capacity!
Hi Brant. Love your vids. I may be acquiring a Soundwave V3 frame for my first build and actually my first bmx since my teens.....that's a while ago...LOL. Wondering what the seat post inner and outer diameter are? Just want to be sure before ordering parts that are not compatible. Many thanks.
Hey thanks man!! That's awesome to hear! I believe its 25.4mm, but as long as you buy one from a BMX freestyle company like sunday or odyssey, kink, cinema, etc...any actual BMX company...you'll be good. They are all the same across the board in freestyle
Those are some weird bars you got there my dude .
You’re not wrong but to each his own and I enjoy them:)
@@Brant_Moore facts
Wow nc bike
Sweet ride. Those monster truck tires tho!
Haha 2.25 is monster truck?
Lol, no no. I meant the tread. I used to run dual purpose back in the day. But I'm appreciating "slicks" these days. Those Aikens are ready for pure dirt...or anything.
Ohhhh! haha They are definitely ready for anything. Exactly what I ride!
You forgot to tell us about the tennis ball ? Slazenger / Dunlop / Wilson . lol
WILSON!!! I meant to and then forgot! Damn it!!! Gotta redo it now
@Brant_Moore what headset bolt do you have is it a beer bottle opener or a front brake cable thru-way hole?
It’s the Odyssey one that comes with the forks. Not a beer bottle opener. Haha
@@oceankluszczynski7242so now i can have a bottle opener on my frame on my forks and on my allen key keychain :P
Would you recommend clear brake pads for colored rims? I've always used chrome rear rims, but I'm gonna have a black Odyssey 7KA on the back. I want some pads that will work with this....
Yep clear pads are actually made for colored/painted rims to try and make them as good as brakes on chrome rims. I personally like clear pads on my rear anodized black rim the best!
Those odessey r32 forks must be some good forks. A lot of bmx riders have those.
The best! That's why everyone has them. Even some guys who ride for companies that make forks have them. haha
A definite safe bet when it comes to forks.
well the best available and probably the second best in terms of strength to weight ratio. directors were the best but they stopped making them. these are slightly weaker but normal looking. other forks are probably as strong but heavier.
Nice bike except those bars are kinda funky
Brant
Question for you
I'm considering the v3, same forks, and gyro.
Did the taller headtube cause any issues setting everything up: enough room for the gyro to move up and down, enough fork for the stem to clamp?
Awesome work on the channel. Keep it up!
I didn't have any issues what so ever when switching from the v2 to the v3. Gyro seemed to have the same travel room and there was plenty of fork for the stem to clamp.
The only thing that happened was that the cable adjustment was different since things were technically a little different measurement wise on cable length.
Thanks for the kind words as well man.
Awesome. That's great. Thanks for the super fast response. Happy early holidays
Let them know I referred you if you do get them!!
Happy Holidays to you as well!
Nice vid Brant! At what length do you have your chainstay set at?
Thank you! Honestly I’m not sure, it’s probably halfway in the dropout. So maybe 13.4?
Hey Brant love your channel! I was wondering how tall you are? I was thinking of getting a soundwave V3 but im not sure if i should go 21 or 20.75. Im roughly 5'7 without shoes on lmao
Thanks man!!
I'm 5'10 and the 21 feels alright for me. I might suggest 20.75 for you being just a couple inches shorter, but I also don't want to be responsible if you hate it! haha
Noice!
Thank you!
Why custom gyro stuff? Just for a bit of fun and hands on?
I got so sick of breaking cables all the time, so I figured out ways to make them last as long as possible. The upper cable without cable ends means random left over cables can be used rather than buying a whole set every time. Tinkering is always fun too
Do you live in the Alvin TX,Because I know someone named Dustin Smith that’s in to BMX
Im up here in Ohio, but that's really awesome
wait....gtx or gtx-r? cause the gtx in steel the r is aluminium. and the new gtx-s is just a lower grade of aluminium. 6061 vs 7075 if im not mistaken. wont go near em personally neither the gtx or the original r and really wouldnt touch the new one. pulled too many apart to trust them. got two from chijioke okafo, a gtx and a gtx-r from a former pro rider from like the 80's. all but one pulled apart on me, including another i got brand new. still have one gtx-r somewhere. snafu mobeus is cheaper, if you dont need the knarps or can get away with the non built in type(seen a few versions had one that worked and another that didnt both odyssey for what its worth) i find it works better. unless youre doing flatland. then the odyssey does spin slightly nicer with the brakes pulled.
tailwhips unless youre doing like more then 4 doesnt seem to matter. one of my buddies whos a tailwhip madman uses the snafu. throw some triflow in either occasionally for maintenance. the odyssey one does have an advantage though as you can rebuild the bearing. remove the seal. remove the c clamp. line up the bearing slot and let them start falling out till you can separate it. then rebuild with new balls. as long as you dont have it pull apart mid trick on you that last forever. even if they pull apart you can rebuild it. c clamps from other gyros work. and you can find the right ball bearings.
could be manufacturing flaws. but never had it on the snafu so i just stick with those. mind you only a couple other people i know have had the pull apart issue. so i think it could just be a bad batch, but for the price not taking a risk.
sexy bike though.
6:39 is that crank arm all the way on ?? sick bike check Brant \m/
Thank you!
I guess it is. I thought the same but asked someone who’s run them for years and he said that’s how it’s supposed to look
Lol, i tripping for a lil while trying to figure out why my cranks was like that.
missing a spoke on the back wheel?
Nope that’s the presta valve hole for the tubeless compatible rim
@@Brant_Moore oooh initially what It looked like to me and then I was like wait this is bmx lol
@@Brant_Moore have you ever thought about running it tubeless?
Haha yea most of alienation’s rims are tcs now. I’ve thought about it before but never pulled the trigger
@@Brant_Moore ill have to check them out. not much info online about tubeless bmx or its all older info. you should make a video on it
Just wondering do you still ride your nowear frame
Yes!
Nooo, you kept the ugliest bars in BMX! JK man, to each their own. 🥳 Shout out the GSport hub guard - cool to see someone still rocking that thing.
Your bike looks heavy
Where did get it from?
The soundwave?
No shoutout for your filmer? 😂
She knows shes the best :)
Yo
Thank you!