Aye man tomorrow does belong to HIM. That video was timely endue with the problems it helped me with, that HE will forever bless you for the love and faith that you have lasted for HIM. And I pray for the situation(s) that you are going through with your kin that HE will heal you and continue to heal you, for the hate you may receive, HIS love will protect your faith. I'll hit you soon to get a box made for my 98 f150 because I want to rightly support our people. Despite these hatin mufuggas I have learned a lot by you bruh an glad I found your channel! thanks for makin a new basshead
I have the 99 series i understand why they call it the beast the 95 has a 3.35 voice coil and the 99 has the 4 inch voice coil Feels like im riding around with the Devil 😂😂😂
Digital Designs does not even rate there subwoofers sensitivity rating on there website. So how can you tell me they are efficient with no numbers to go by?
Though I’m well aware that you predominantly do truck boxes; I was wondering if you were planning a review of the DD SL600. I’ve been considering changing my current shallow mount with the DD and a box from you , for a while; however I need to objectively know if it Sounds as good as DD claims (Not SPL , SQ) . Thank you in advance
Greetings to you Mr MBE,I currently have two of these gods of bass,question if I may? what would be a recommended port area for these two bass gods in 9cu ft of air space net? sub & port will be facing forward.
Nice. Any reviews and testing on DD608D? Looking to buy 1 and put it in 1 cu-ft net volume 13 sq-in of port area and tune to 35hz in a nissan navara pickup truck. The amplifier I am using is rated 600 RMS @ 1 ohm. Any advice on the enclosure or the spec above looking good? I have learned a lot from your videos. Big thanks to you.
How much for a enclosure i got the same woofer gunna run a rockford fosgate t1500 series amp i would need it shiped to san diego california im out in tijuana mexico but got a friends address i can ship to san diego
I would trust mb over my opinion ive never had DD but id say certainly .. 4in coil.. great soft parts.. direct leads. The box volume will also dictate what it will handle as well.. but I'd say it's capable of that . Dd underates the subs.. they will handle more than rated for sure
Yes as long as it is clean power and not clipping the max wattage is 8k I've seen many 9500s running on m3 amps that put out over 3k in a daily setup. I have 3 9915s on 2 7.5ks strapped and I have 2 800 series 18s on 2 m3s that I pound on regularly
The 9500s have a 3.35 in vc the 9900s have a 4.
OMG that stain finish is on point!! Much better than those earlier boxes.
Your boxes are so nice and clean man, I like this simple, classic look. Gotta get me one at some point 😂
Now that's a clean subwoofer and a bad azz box. I like it but I'm still waiting for the Solo X. Keep up the great content 💯👍
Aye man tomorrow does belong to HIM. That video was timely endue with the problems it helped me with, that HE will forever bless you for the love and faith that you have lasted for HIM. And I pray for the situation(s) that you are going through with your kin that HE will heal you and continue to heal you, for the hate you may receive, HIS love will protect your faith. I'll hit you soon to get a box made for my 98 f150 because I want to rightly support our people. Despite these hatin mufuggas I have learned a lot by you bruh an glad I found your channel! thanks for makin a new basshead
Do you still read my comments?? Well if you do read this I LOVE THIS SUBWOOFER YOU ALSO BUILT A WONDERFUL BOX THAT LOOKS SOLID! 👍
😀
Man I love that box design.. hopefully we can do something similar for my t213 build.. I think I need 4cu..
I have the 99 series i understand why they call it the beast the 95 has a 3.35 voice coil and the 99 has the 4 inch voice coil Feels like im riding around with the Devil 😂😂😂
THE KING!!!!!!!
Hey mb whats a similar dd sub compared to the sundown sa series for the 10"
check put red line
700 series 10”
@@M.B.Enclosures what if I wanna 1 up the sundown sa what model to I get I have like 1.2cubes per side ported
Gunna run it on a 2002 chevy suburban
Does Digital Designs have any efficient 12" subwoofers with a 90dB sensitivity or higher at 1W/1m?
yes. all of the USA 12" subs are highly efficient, and I believe the rl psw and 600 series fall into that category as well.
All DD subs are efficient sir
@@blakebrockhaus347 Ok, I'll go onto the website & see how many are rated at 90dB or higher @ 1W/1m to see for myself.
Digital Designs does not even rate there subwoofers sensitivity rating on there website. So how can you tell me they are efficient with no numbers to go by?
@@DTW-bx2vy if you have to ask about it, it’s not for you
Very nice boxx
Thinkin bout havin this man build me a box for my 2 l7 q series All I’m tryna do is flex stores windows I need a box specifically tuned to 32hz
Though I’m well aware that you predominantly do truck boxes; I was wondering if you were planning a review of the DD SL600. I’ve been considering changing my current shallow mount with the DD and a box from you , for a while; however I need to objectively know if it Sounds as good as DD claims (Not SPL , SQ) . Thank you in advance
I haven’t heard it .. yet
Greetings to you Mr MBE,I currently have two of these gods of bass,question if I may? what would be a recommended port area for these two bass gods in 9cu ft of air space net? sub & port will be facing forward.
16-17 per cube
Thank you,much appreciated 🙏.
4inch vc no 3.35 inch vc on the 9500 dd audio subs
That's a monster..
Nice. Any reviews and testing on DD608D? Looking to buy 1 and put it in 1 cu-ft net volume 13 sq-in of port area and tune to 35hz in a nissan navara pickup truck. The amplifier I am using is rated 600 RMS @ 1 ohm. Any advice on the enclosure or the spec above looking good? I have learned a lot from your videos. Big thanks to you.
I’m waiting for them to come back in stock.
Sounds good
How much does this enclosure cost?
How much for a enclosure i got the same woofer gunna run a rockford fosgate t1500 series amp i would need it shiped to san diego california im out in tijuana mexico but got a friends address i can ship to san diego
That amp is way too small. The 9500 need at least 3k
Can this sub handle 3k RMS
I would trust mb over my opinion ive never had DD but id say certainly .. 4in coil.. great soft parts.. direct leads. The box volume will also dictate what it will handle as well.. but I'd say it's capable of that . Dd underates the subs.. they will handle more than rated for sure
Yes as long as it is clean power and not clipping the max wattage is 8k I've seen many 9500s running on m3 amps that put out over 3k in a daily setup. I have 3 9915s on 2 7.5ks strapped and I have 2 800 series 18s on 2 m3s that I pound on regularly
It can handle more
@@robertclark6166 let me have one. I have a m3 and a 9500 c motor. I’m going to send it back to get built
That is a 3.35” voice coil
How much will u charge me to make a subwoofer box for 2 kicer solo baricks l5 quare sube thar10 inches
Text me
3.3” 😅