You made a similar build like me back then, what surprises me that you didn't have to remove the rubber gromets in the case the backplate of the motherboard is resting on since it's a rather thick board, it wouldn't fit properly for me making screwing in the screws of the motherboard nearly impossible iirc, so I removed them. However, I'm still rocking an EVGA 1080Ti FTW3 and AX1200i but have upgraded the ram fully stable to 4x32GB DDR5-5600 @5400Mhz XMP CL40 2T Corsair Dominator Platinum RGB. And the ROG DIMM.2 is now holding two 990 Pro 4TBs. Which reminds me, the video has not detailed the ROG DIMM.2 installation but otherwise great video. The case has one huge pitfall however, the HDD-bay is not actively cooled, HDDs may easily overheat as mine ran between 50-60°C with four inside, solved by moving out two disks and put low profile noctua 92mm fans inside connected to CPU_OPT header dropping temps by 15-20°C. Hopefully there will be PCI-E 5.0 risers for GPU when the RTX5090 comes out as I doubt it will fit horizontally.
Will the Seasonic PRIME TX power supply fit a Cooler Master HAF 700 EVO case? Your video shows that the case fits lengthwise without a problem! The HAF 700 EVO case manual indicates a depth of 200 mm and the seasonic atx 3.0 1600w power supply is 210 mm long. Thanks in advance for your advice
I subbed..i have this case.. doung a build. I put 3 cooler master fans in bottom. Where do i wire them too. Cooler master includes the rgb places in back. But i don't understand where to plug these into.
For me, this video card is a little unclear, the first time I bought it, it turned out to be defective, I had to change it, in general, I still don’t understand how it should behave normally. There are a lot of complaints about this card, and some kind of disregard on the part of the manufacturer towards their product. I think this card is crude and unstable
You made a similar build like me back then, what surprises me that you didn't have to remove the rubber gromets in the case the backplate of the motherboard is resting on since it's a rather thick board, it wouldn't fit properly for me making screwing in the screws of the motherboard nearly impossible iirc, so I removed them.
However, I'm still rocking an EVGA 1080Ti FTW3 and AX1200i but have upgraded the ram fully stable to 4x32GB DDR5-5600 @5400Mhz XMP CL40 2T Corsair Dominator Platinum RGB.
And the ROG DIMM.2 is now holding two 990 Pro 4TBs.
Which reminds me, the video has not detailed the ROG DIMM.2 installation but otherwise great video.
The case has one huge pitfall however, the HDD-bay is not actively cooled, HDDs may easily overheat as mine ran between 50-60°C with four inside, solved by moving out two disks and put low profile noctua 92mm fans inside connected to CPU_OPT header dropping temps by 15-20°C.
Hopefully there will be PCI-E 5.0 risers for GPU when the RTX5090 comes out as I doubt it will fit horizontally.
It looks amazing but I used a HAF-X for 8 years till 2 months ago and these cases are too overpowering in an average home. I use a Be Quiet 500DX now.
Awesome build! Amazing! Great job!
That was sick!! B)
How is it Rog Ryuo temp ? Max and Gaming please tell.
Beautiful and Amazing
Absolutely Amazing🔥🔥🔥🔥
*Mad build*
AIO should have gone to the right with the tubes so that they dont hit the fans, also should have completed it with the ROG RYUJIN III 360 ARGB AIO
also for such a big case, u can fit much bigger (coolers/radiators)
I want that case, so beautiful
The motherboard and the cooler!!!
WOW top tier pc 👍🏻👍🏻👍🏻
Excellent, fantastic.
Will the Seasonic PRIME TX power supply fit a Cooler Master HAF 700 EVO case?
Your video shows that the case fits lengthwise without a problem!
The HAF 700 EVO case manual indicates a depth of 200 mm and the seasonic atx 3.0 1600w power supply is 210 mm long.
Thanks in advance for your advice
Hot air from GPU is blowing straight on motherboard. Not great idea.
I subbed..i have this case.. doung a build. I put 3 cooler master fans in bottom. Where do i wire them too. Cooler master includes the rgb places in back. But i don't understand where to plug these into.
i noticed u dismounted the ryuo and changed the position to downside. I imagine thats the unique option able, right?
No benchmarks, temperatures??
Nice hmbh
damn msi rtx 4090 suprim x is still in stoc in newegg
I had eyes on that motherboard but Asus said DDR5-8000+ is not possible with it.
Is it possible to replace the air-cooled gpu with MSI spurime liquid 4090, and add another 4070 Ti air-cooled gpu?
FINALLY!
Did you get this card on ebay?
gooooooo
*Hello, do i need an empty usb 2.0 header on my motherboard in order to use Iris display?*
👍👍👍👏
Ryzen 9 7950X Amd And Rtx 4090 We Wait This
In deskripsion aio not asus ryujin but asus ryuo
What vertical mount bro
I just realized one thing: all those PC build channels never build HDD into the PC.
not even sata SSD.
My current build isn't high end but has three M2 SSDs. Less of those damned wires.
well that 4090 may melt
nice case but for 1k...not happening
❤✌️
Ultimate and then uses air cooling for the gpu and a AIO for the cpu! 😂 It’s a nice machine but not ultimate.
Please send me the gpu
msi suprim x 4090
man these cases are so big and looks so bad!
😍😛😛🥰❤️💶💶
my build is better
For me, this video card is a little unclear, the first time I bought it, it turned out to be defective, I had to change it, in general, I still don’t understand how it should behave normally. There are a lot of complaints about this card, and some kind of disregard on the part of the manufacturer towards their product. I think this card is crude and unstable
Haha electricity bill go brrrrrrr
Haha electricity bill go brrrrrrr