What is positive Sequence, Negative Sequence and Zero Sequence?

What is positive Sequence, Negative Sequence and Zero Sequence?
Positive sequence
The system follow the power system.
Negative sequence
The system which is oppose to the power system.
zero sequence
The system which will not follow or oppose the power system
For tamil verision of the video you can find on below link
• What is positive Seque...
For Tamil verison for all video you can find link below
/ @baranitechtamil3283

[@fernandomorales2512]

Thank you for your excellent presentation on positive, negative and zero sequences. I have read up on this topic in the past but after reading the material I still did not have a clear understanding the sequences. Thanks to your well presented information it has helped me better understand the topic. Thank You so much for sharing.

[@baranitech1026]

welcome

[@ataollahshokati6953]

hi bro this the best lecture that i ever seen about phase sequence, thank you this solve one of my major problem

[@baranitech1026]

welcome

[@dahmaneahmed3640]

Thank you so much for your all of the efforts it's very helpful

[@baranitech1026]

most welcome

[@muhamedmuneer4540]

Thank you for wonderful lecture. Can u explain what are the sequnce available in different fault.like phase to phase ,phase to earth,3 phase fault,3 phase to earth, etc...

[@baranitech1026]

yes bro soon i will make video

[@chanakhun6536]

You are so amazing thank for teachings ( from new engineer in Thailand)

[@baranitech1026]

thank you and welcome

[@timnath6604]

Congratulations! Very well explained

[@baranitech1026]

Thank you!

[@sonam.makhija1995]

Thank u so much for explaining wonderfully.can u please tell me how the positive and zero sequence impedance is decided for 220kv Transmission line if the conductor is zebra (for calculation of zones impedance) kindly answer my ques

[@baranitech1026]

i will make one video related with this.

[@giriprasath2193]

thanks a lot brother... neat and clear explanation.. ton of thanks for you.... and mic is good and audible thanks once again bro

[@baranitech1026]

welcome bro.

[@ashishvitekar3474]

Very nice explain and informative video's keep it up
Thank you

[@baranitech1026]

Most welcome

[@arindamchoudhary4029]

Honest effort sir...my gratitude

[@baranitech1026]

thank you

[@abdulkaderzabarah8890]

Thanks alot for your efforts. Very helpful!!

[@baranitech1026]

Welcome

[@socalmal9365]

Thank you for your excellent video. Keep them coming...

[@baranitech1026]

thank you and most welcome

[@ept3249]

Sir symmetrical and unsymmetrical components video explain very nice.
Sir please add video different types of faults in 1phase to ground fault,
2 phase to ground fault, 3phase to ground fault, 2phase fault, 3phase fault in positive, negative, zero sequence phasor diagrams explain.

[@baranitech1026]

sure bro i will make for you soon.

[@ravenpangatungan8624]

Thank you, sir. Well explained!

[@baranitech1026]

welcome

[@mohammadpathan4668]

Well explained ! Thank you !

[@baranitech1026]

welcome

[@sampatbera6928]

Best content on this topic , I ever faced❤

[@baranitech1026]

thank you and welcome

[@onlineeducationalways2050]

Sir, phasor Rotates in Anti Clockwise Direction But here you have taken Clockwise Rotation, then in that case after if I put my finger on R( 0 degrees) then B is coming and after that Y is coming is it right.

[@baranitech1026]

R- 0 , Y- 240 and B- 120 angle in this way is easy to check.

[@sunnypatel7409]

Thank you Dear, this is my 1st ever comment and which goes to you. Really Appreciating. Please make videos like this

[@baranitech1026]

thank you and welcome

[@prabeshray5366]

Thanks u so much for clearing this confusion

[@baranitech1026]

My pleasure

[@MajorZero61]

7:50 For the negative sequence calculation for condition 2, I am getting (1

[@baranitech1026]

at 7:50 i am explaining negative seq current value. thank you.

[@AnwarTariq-ri5bl]

EXCELLENT SIR

[@irfanulhaq5350]

Sir can you explain in briefly, how this will effect in resistive & inductive loads

[@user-km6ys9pg3q]

is cbct will operate unbalance ondition and zero sequence current is absent

[@baranitech1026]

if unbalance in R, Y, B then it has to take other path only N , thank you .

[@KarthiKeyan-uh5fw]

Really great job sir....

[@baranitech1026]

thank you

[@nagahemachandchinta5498]

Sir,
Why does zero sequence current cannot flow without a neutral path?

[@baranitech1026]

3Io=In .so without IN there is no Io

[@MonemTariq]

At 14:29 you intermixed the angle values of Y and B phases, then how did you get the answer correctly?

[@baranitech1026]

your real good view here i make mistake on broad sorry

[@asadahmed1164]

thank for yor explaining but could you tell me why we set the value of earthfault protection between 30 to 50% of rating current

[@baranitech1026]

earthfault protection should be from 5% depends on its application

[@abanikantarout5119]

Why unbalanced current setting in relay called/related to negative sequence current ?
Pls explain.

[@baranitech1026]

due to unbalance also cause by negative sequence current

[@devendrabhatt7490]

Sir why negative phase sequence occur ?

[@abdullahadawi3055]

Thank you very much ❣️

[@baranitech1026]

You’re welcome

[@sohailjanjua123]

Hi, I like your lecture

[@baranitech1026]

Thank you

[@alahandrorodrigo7258]

Excellent delivery

[@baranitech1026]

thank you very much

[@ctiontime5925]

Good 👌👌👌👌👌👌👌👌👌👌explanation

[@baranitech1026]

Welcome most 🙏

[@aaronsaldanha2815]

I cant thank you enough !!

[@baranitech1026]

welcome most

[@shihabahmedalkatrani3050]

Thank you 🙏
Go on

[@baranitech1026]

welcome

[@thara2341]

Good one.

[@baranitech1026]

Thanks!

[@varadharajanelectricalengi5954]

10:05 🙏

[@harishdamariya7481]

Very nice...

[@baranitech1026]

Thank you and welcome

[@MahadevBhaktAjayRoy]

Thanks sir.

[@baranitech1026]

Most welcome

[@varadharajanelectricalengi5954]

FOR MOTOR REVERSE Direction WE REVERSE ANY 2 PHASE IS IT CREATES UNBALANCE CURRENT IN MOTOR FEEDER

[@baranitech1026]

no it will not create unbalance we will change only R and B 2 phase

[@niharbahirat2967]

Thank you!

[@baranitech1026]

welcome

[@nasinasuresh2986]

Thank you❤

[@baranitech1026]

welcome

[@gopin.k2345]

Sir
Super class

[@baranitech1026]

thank you

[@AfsalPA]

Thank you

[@baranitech1026]

You're welcome

[@RodrigoNeoo]

thank you so much to share this with us. Can you create a new WhatsApp group?

[@baranitech1026]

i will make

[@saravanann4907]

I have one doubt...why u take " a "as 1

[@baranitech1026]

its formula

[@ArunKumar-wf2xd]

Super

[@baranitech1026]

thank you

[@deltech9947]

hi annan what is A=1amps angle 120

[@baranitech1026]

fixed value bro

[@deltech9947]

@@baranitech1026 ok annan

[@deltech9947]

Incase R, and Y ph i'm injecting 2 amps , b phase im injecting 3 amps.....In that case also the value of a= 1 angle 120 deg only ?

[@velusamypothiraj2300]

Can you show the calculation step with calculator

[@baranitech1026]

i will make one more video regarding this with more steps

[@sVaism]

not enough subtitles

[@baranitech1026]

I will try for making subtitles

[@amitvikrampujar5517]

Dear one, good effort!
But, your waveform and the PHASOR expression DON'T match.
In your waveform : Y leads R by 120 deg, but
In your phasor : Y leads R by 240 deg.
Please maintain consistency in the waveform and PHASOR expression.

[@baranitech1026]

positive sequence - first start with r follow with y and b and also RYB, YBR & BRY they all positive sequence
negative sequence - RBY, BYR & YRB this combination are negative sequence
if i am not wrong.
if still you find mismatch with me you can share link to me for ref. thank you.

[@abhi2138]

What is A ? And, How a = 1 < 120?

[@baranitech1026]

its formula used in sequence much deeper i don't know i will try to find thank you

[@abhi2138]

@@baranitech1026 Ok

[@WALTERpal]

its hard for me to understand indian teachers,because of their accent makes it difficult,since it sounds like their language. i know indians are very good at their science but the accents makes it hard. no hard feelings.if they try to inprove pronunciation will be better. thanks

[@baranitech1026]

thank you for your commands i wil try to improve

[@X-Jack231]

Well we will continue to have different accent just like you can't speak Indian languages with Indian accent...Try to understand

[@anishagupta3951]

Then go and learn from the teacher who have your accent 😂😂 , why are you coming for a indian teacher ? Are all your people dumb ?

[@DANIEL5775]

I think you plot your phases wrong in time. IB and IY need to be replaced with each other.
Who is with me?

[@baranitech1026]

R is in vertical so it is making confuse for you image and rotate the phase diagram R in Horizontal then it will be clear for you .

[@ssb9892]

tuti futi angrezi bolne s to aacha hindi m he bana diya kro re video...km s km samz to ayega to tumko bhe views aache milenge

[@shamshadansari1630]

Thank you

[@baranitech1026]

You're welcome