TO PRODUCE SOUND: Hold the quena with your right hand covering the bottom three holes. Your left hand should cover the top three with your thumb covering the hole on the back. Hold the quena to your mouth and close the top end of the pipe with the flesh between your chin and lower lip. The u-notch / embouchure indentation should rest against your bottom lip. The first thing that is required is to shape your lips properly. Smile a narrow grin as if you are spitting out a watermelon seed. This pulls the lips against your teeth. Blow a stream of air downward along the axis of the pipe into the mouthpiece end. Think of blowing a tiny pinpoint air steam. In order to find that precise location, slowly rock the flute back and forth to direct the air at slightly different angles. Tilt the angle of the u-notch up and down until it makes a tone. Get accustomed to holding the quena in this manner and find the exact point where air must be blown to produce sound. Practice until you are able to consistently blow into the mouthpiece and produce sound.
I do research po bosing about sa Quena flutes... Simple lang naman po ang pagbutas ng mga finger holes,. Basta abot po ng mga daliri ko, dun ko po sya bubutasan,.. magkakaiba nalang po sa diameter ng butas, depende sa tono,. Malaking tulong po ang tuner app. Salamat po
Hi,..i put the exact measurements in the video..likewise, the easy way to bore the finger holes is where your fingers easily reached or cover it.. Thanks..
The thickness is approximately 2mm to 2.5mm.. you can experiment using different thickness of the pipe to produce different kind of sound..thanks you...
TO PRODUCE SOUND: Hold the quena with your right hand covering the bottom three holes. Your left hand should cover the top three with your thumb covering the hole on the back. Hold the quena to your mouth and close the top end of the pipe with the flesh between your chin and lower lip. The u-notch / embouchure indentation should rest against your bottom lip. The first thing that is required is to shape your lips properly. Smile a narrow grin as if you are spitting out a watermelon seed. This pulls the lips against your teeth. Blow a stream of air downward along the axis of the pipe into the mouthpiece end. Think of blowing a tiny pinpoint air steam. In order to find that precise location, slowly rock the flute back and forth to direct the air at slightly different angles. Tilt the angle of the u-notch up and down until it makes a tone. Get accustomed to holding the quena in this manner and find the exact point where air must be blown to produce sound. Practice until you are able to consistently blow into the mouthpiece and produce sound.
TO PRODUCE SOUND:
Hold the quena with your right hand covering the bottom three holes. Your left hand should cover the top three with your thumb covering the hole on the back.
Hold the quena to your mouth and close the top end of the pipe with the flesh between your chin and lower lip.
The u-notch / embouchure indentation should rest against your bottom lip.
The first thing that is required is to shape your lips properly. Smile a narrow grin as if you are spitting out a watermelon seed. This pulls the lips against your teeth.
Blow a stream of air downward along the axis of the pipe into the mouthpiece end. Think of blowing a tiny pinpoint air steam.
In order to find that precise location, slowly rock the flute back and forth to direct the air at slightly different angles. Tilt the angle of the u-notch up and down until it makes a tone.
Get accustomed to holding the quena in this manner and find the exact point where air must be blown to produce sound.
Practice until you are able to consistently blow into the mouthpiece and produce sound.
ok kaayo lods. puyde na mag negosyo. gawa ka tindahan doon sa gate 2 sigurado madami ka customer doon.
Pwede po bosing... Madami na nga nagpapagawa kaso hindi ko kaya gawin lahat ng sabay sabay...😅
Thank you very much from Mr. Mujica in Sweden.
Nice project...I will try this one....
Nice share my friends
Thanks...😊
what is the external and internal diameter of pvc pipe is also not mentioned.
The external diameter of the tube is 25mm, and the inside diameter is 20mm
mahusay👍
Salamat po, dios mabalos!.
Great tutorial, thanks!
Thank you 😍
ayos na ayos ka talaga idol, alam mo ba ako di marunong mag butas kung ano ang tuno nya basta binutqsan ko lang po
I do research po bosing about sa Quena flutes... Simple lang naman po ang pagbutas ng mga finger holes,. Basta abot po ng mga daliri ko, dun ko po sya bubutasan,.. magkakaiba nalang po sa diameter ng butas, depende sa tono,. Malaking tulong po ang tuner app. Salamat po
@@fluteartsmusicenthusiast5555 ah oo nga po idol hehe
cool...
Sir, please tell how to take the measurements.
Hi,..i put the exact measurements in the video..likewise, the easy way to bore the finger holes is where your fingers easily reached or cover it.. Thanks..
Excellent video nice job 👏👏👏👌
Thanks!..😁
Which app chatting sound
Ya
Could you tell me which is the thickness in cms or the tube ?
The thickness is approximately 2mm to 2.5mm.. you can experiment using different thickness of the pipe to produce different kind of sound..thanks you...
That's super cool DIY project. Love it. Will def try to make one. Does the thickness of the PVC make a difference in your opinion?
Absolutely yes!.. thickness of the PVC have a great effect on your flute..
Idol Anong app gamit mo sa pagtono Ng flute
Soundcorset tuner po bosing...
Salamat idol
Nice🥰🥰🥰
Gracias amiga😁
from where the hell you are blowing is not shown.
TO PRODUCE SOUND:
Hold the quena with your right hand covering the bottom three holes. Your left hand should cover the top three with your thumb covering the hole on the back.
Hold the quena to your mouth and close the top end of the pipe with the flesh between your chin and lower lip.
The u-notch / embouchure indentation should rest against your bottom lip.
The first thing that is required is to shape your lips properly. Smile a narrow grin as if you are spitting out a watermelon seed. This pulls the lips against your teeth.
Blow a stream of air downward along the axis of the pipe into the mouthpiece end. Think of blowing a tiny pinpoint air steam.
In order to find that precise location, slowly rock the flute back and forth to direct the air at slightly different angles. Tilt the angle of the u-notch up and down until it makes a tone.
Get accustomed to holding the quena in this manner and find the exact point where air must be blown to produce sound.
Practice until you are able to consistently blow into the mouthpiece and produce sound.
Ano po yung Tuner app na gamit mo?
@@jay-araguilar6640 soundcorset, playstore...
Hello po baka po nag bebenta kayo niyan? Ano po facebook nyo?
very useless presentation.
Thanks, 🙏 🙏🙏 godbless you always😊