🔴 JOIN IN OUR MEMBERSHIP COMMUNITY FOR EXTRA BENEFITS: ua-cam.com/channels/8YSf31gqZPMu0dsbiXAaxw.htmljoin 🔴 JOIN US ON: 👥 FACEBOOK facebook.com/idealbikemoto 📸 INSTAGRAM instagram.com/ideal.bike 🔔 Subscribe for more videos: ua-cam.com/users/IdealBike Partnerships: idealbike2018@gmail.com 🔴 There are plenty of options in terms of exhausts for the new 2024 Honda XL750 Transalp. Let’s find out which one fits better to YOUR bike! 🔔 Make sure you make your choice and share it in the comments section below.
Yes there is...installed on my own bike: ua-cam.com/users/shorts3xt8fRI2HQc Also check out the unboxing and install: ua-cam.com/video/mPP0CKL5FO8/v-deo.html
Thank you for this amazing video !! I respect your work sincerely 🙏 My final option is Yoshimura and thank you again for your effort 🙏 regards from Greece.
I installed the carbon version from RoadsItalia and is a great exhaust !!! I have removed the DB Killer, is not such loud as someone would expect and the sound is superb in all the revs. I highly recommend it
No, you need to learn about the difference between crankshaft hp and rear wheel hp. You can be sure these accessory exhaust manufacturers aren’t using USA spec bikes to homologate Euro5 compliance 😂.
I don't like the two positions, they are both very horizontal, one quite low, the other one too high. To me the ideal exhaust position is almost vertical at around 45deg. angle.
@@IdealBike Any exhaust really. The only one shown at a correct angle is that funny looking trumpet one. This to me would be the correct angle of any exhaust which I am sure you could obtain with any of the mufflers you have shown, you just have to weld your own pipes.
@@IdealBike I would probably have the SC Project Rally Raid or Rally X GT with a custom made line that would allow a more vertical angle of the muffler. You could improve the floor clearance of the Transalp greatly by diverting the exhaust line instead of having it run under the engine block. I wish Honda would release a proper off road version of the Transalp.
Let's calculate, depending on what will you choose. Skidplate 275 eur, Crash Bar 250 EUR, Quickshifter 800 EUR, Engine Guard 250 EUR, 12V socket 20 EUR, (Accessories from Hepco-becker). Handguards Barkbusters 200 EUR, Acerbis are 175 EUR. Exhaust.... From 400 up to 1000 EUR 😂. If you choose OEM accessories you kind of double it. Sky it's the limit 😂
Normally it's the same engine, most likely it's electronically restricted / limited. It should work. But then you'll have to deal with the California State regulations
🔴 JOIN IN OUR MEMBERSHIP COMMUNITY FOR EXTRA BENEFITS:
ua-cam.com/channels/8YSf31gqZPMu0dsbiXAaxw.htmljoin
🔴 JOIN US ON:
👥 FACEBOOK facebook.com/idealbikemoto
📸 INSTAGRAM instagram.com/ideal.bike
🔔 Subscribe for more videos: ua-cam.com/users/IdealBike
Partnerships: idealbike2018@gmail.com
🔴 There are plenty of options in terms of exhausts for the new 2024 Honda XL750 Transalp. Let’s find out which one fits better to YOUR bike! 🔔 Make sure you make your choice and share it in the comments section below.
Amazing video!! The mivv and the yoshimura wins
The mivv advantages for Transalp is for the USA market: 82 HP
Yes, I've found out about it yesterday after watching a US review. Greetings
Danke für den tollen Bericht..war wirklich sehr hilfreich..lg Safet
This video could have been less than 10 minutes long, what are you doing?
I detail the content like no one else. Thanks for the comment !
Why don’t you do it then ? What a stupid comment !
Are there any 3rd-party header pipes that conforms to the EC/ECE requirements and are lighter than the OEM pipes?
I've only included in the video the most known, and most are Euro 5 approved.
Yoshi
It sound great indeed
Here's the Leo Sound
ua-cam.com/video/bedtl9DTEA8/v-deo.html
Thanks a lot!
Shame every manufacturer missed the opportunity to design a modern version of the iconic TransAlp silencer.
My favourite one it's HpCorse
@@IdealBike The high mounted one is really nice! I'm going for the traditional Arrow collectors and Indy race evo with steel end cap.
HP Corse looks nice, I wish there was a sound test for it
Yes there is...installed on my own bike:
ua-cam.com/users/shorts3xt8fRI2HQc
Also check out the unboxing and install:
ua-cam.com/video/mPP0CKL5FO8/v-deo.html
VIDEO TIMELINE:
0:00 INTRO
0:24 AKRAPOVIC
07:54 MIVV
17:07 LEOVINCE
24:08 SC PROJECT
30:38 ARROW
36:10 IXIL
41:40 YOSHIMURA
45:20 HPCORSE
Thank you for this amazing video !! I respect your work sincerely 🙏 My final option is Yoshimura and thank you again for your effort 🙏 regards from Greece.
Thanks a lot for your input, greetings from Romania 🙏
I installed the carbon version from RoadsItalia and is a great exhaust !!! I have removed the DB Killer, is not such loud as someone would expect and the sound is superb in all the revs. I highly recommend it
Could you please share a link?
No, you need to learn about the difference between crankshaft hp and rear wheel hp. You can be sure these accessory exhaust manufacturers aren’t using USA spec bikes to homologate Euro5 compliance 😂.
Yoshimura war der beste Sound meiner Meinung..👌👌👌
Yoshi all the way!
AKRAPOVIC makes me sick
Yoshi is great but could be fire 🔥 with a header also😎
I don't like the two positions, they are both very horizontal, one quite low, the other one too high. To me the ideal exhaust position is almost vertical at around 45deg. angle.
What exhaust are you referring to?
@@IdealBike Any exhaust really. The only one shown at a correct angle is that funny looking trumpet one. This to me would be the correct angle of any exhaust which I am sure you could obtain with any of the mufflers you have shown, you just have to weld your own pipes.
@BonuxCouleur My choice is Hp Corse, check out the Unboxing, install and test videos. For me, it's the perfect choice. Greetings
@@IdealBike I would probably have the SC Project Rally Raid or Rally X GT with a custom made line that would allow a more vertical angle of the muffler. You could improve the floor clearance of the Transalp greatly by diverting the exhaust line instead of having it run under the engine block. I wish Honda would release a proper off road version of the Transalp.
Looks like the accessories themselves would cost about half of the bike price, wouldn’t it?
Let's calculate, depending on what will you choose. Skidplate 275 eur, Crash Bar 250 EUR, Quickshifter 800 EUR, Engine Guard 250 EUR, 12V socket 20 EUR, (Accessories from Hepco-becker). Handguards Barkbusters 200 EUR, Acerbis are 175 EUR. Exhaust.... From 400 up to 1000 EUR 😂. If you choose OEM accessories you kind of double it. Sky it's the limit 😂
@@IdealBikeI think quickshifter
@Fromatic Yes, I need to check one more time
What do you think about MORIWAKI?😊
Just found out the link from Moriwaki, not bad. They seem to have 2 styles:
ua-cam.com/video/lRHjYISDO9s/v-deo.htmlsi=tZo8LbwNRnA02zaz
REMUS NXT (+4.3HP and +4.7Nm)
The have it for the Hornet
www.xparts.net/en/remus-nxt-stainless-steel-matt-racing-slip-on-for-honda-cb-750-hornet-2023
Yoshi sounds the best to me.
Is there any way to increase the HP of the USA version of the Transalp?
Normally it's the same engine, most likely it's electronically restricted / limited. It should work. But then you'll have to deal with the California State regulations
I would like to know which one is the quietest... adding fractions of horsepower in this case is a bit pointless...
They all have no more than 90 dB with DB Killer on, more or less the same. The quietest is the standard 😂
Excellent video, great to see there are a few high options, if only Yoshimura made a high option it would be an easy win!
Totally agree, my favourite one remains Hp Corse
Look forward to see more of the sh mode :)
Sure, tomorrow comes the first service
The reason you see 84 HP's everywhere is because of the American market. Should know that before you come with this video...!?!? 🤫
My apologies but I didn't expect that! Why only 85 HP for US market? US customers don't deserve more HP? Why not 92 HP?
@@IdealBike Califórnia rules... Crazy Americans... 😆
Why would we get less hp than Europe. That sucks.
Only in the US, Europe has 92 Hp
Oso ondo asko guztau jat. Urrengua motorra ekartzia thanks
Does it just come from removing the original and installing the Yoshimura or do I have to buy something additional?
It's pretty straight forward, only the slip on
Thanks for your work, very much appreciated from here in 🇬🇧 UK
Thanks a lot !
Hp corse
That's also my favourite