GREAT VID - I opened my heater and same problem - I bypassed the thermal fuse with piece of wire soldered in and it works fine. Still chucking it though, by the time I've bought the thermal fuse and messed about I've saved a ten quid heater - but it was fun getting it going again. Thanks Haseeb Electronics!
No everyone have equipments like your meter at home. For females like myself please show how to fix things without these equipments too. Also you should have shared the fuse changing too.
Thank you 😊 i got an idea from you. The fuse cuts the flow of currency if its dead, so just put a wire that runs aross the fuse to ensure the flow of current is not interrupted and its now working 💃💃
Thank you for informative demonstrating on how to fix the heater fan. I have subscribed to your channel. I have a similar heater fan but I am unable to unscrew that have Y heads. Could you kindly advise where to get the screw driver? I have been to hardware store and they have a full sets of screw driver and don't sell single Y head screw driver.
This is very interesting dear friend !!! Thank you for sharing this helpful upload !!! 👍27 Warm greetings from the sleeping "Garden of Angels" in Austria......have a great Sunday.....Saderé💜
Thank you for such an informative video. Any chance you could help me troubleshoot a fan heater problem that heats for a few seconds then stops due to the thermal switch clicking open? The fan works perfectly. I’m not sure if I need to replace the thermal switch or another part. Please, can you help?
best regards thermal protection trips off when there is inadequate air flow through fan heater, and the temperature in heater area increases, in that case thermal protection gets activated and protects the heater. you can send a picture to whats-app 00-962-79-11-61-084
@@HaseebElectronics i have same fan heater but the connection where the coil joints are white plastic corner burnt and broken off So now I can see glowing light in connection wires Do i need to change that plastic white element part?
Would u have to reassemble the powercoils to just use the fan without the heating element.or would you need to add start capacitor if u bypass the thermostat cord.
My heater was not switching on and I did this but now it's only blowing cold air. Could u please refere me to a video you made or know that explains how to fix the heating element
Salaam wucyclum brother jazzallah khiar for the video and help, I put a new fuse and then goes cut off and then come back on.It doesn't go to hight temporary.The fuse is the same thermal cutoffs type SF119E rated ope temp 121°C. What do you thing brother need bigger fuse. Stay warm model F2003WH voltage 220-240v-50Hz 1800-2000W Batch DXF0039266
Good video, but the really critical bit is missing: what fuse did you use and how did you replace a broken fuse which looks as if it is riveted in place?
it is SF214E 250V 10Ampere thermal fuse. it is used when thermal switch or thermostat can not open teh circuit or air flow stops due to any obstruction in air inlet or outlet, the inner temperature will increase withing the heater body, so this fuse will disconnect the circuit as a last step in safety
For my case, the fan runs well but the heating element is not working. Can I use any electrical 10Ampere fuse? Getting the very specific fuse is difficult.
10 ampere normal fuse works normally but it will not act in over temperature condition. it's safety will bypassed in case any obstruction in air flow will cause to catch fire
Buongiorno, ho una stufetta che ha solo una manopola. La resistenza diventa incandescente e stacca. Ho cambiato il fuse perché interrotto ma ancora fa il difetto. Cosa mi consigli?
yes dear you are right. i western countries it is same scenario. but if it is repairable at low cost then it must be repaired instead of throwing it away at minor faults
wonderful superb👍👍👍👍👍👍👍
c m
instablaster
In my case fan is not blowing heating element is fine can you help? How to fix the fan troubleshooting fan part
GREAT VID - I opened my heater and same problem - I bypassed the thermal fuse with piece of wire soldered in and it works fine. Still chucking it though, by the time I've bought the thermal fuse and messed about I've saved a ten quid heater - but it was fun getting it going again. Thanks Haseeb Electronics!
No everyone have equipments like your meter at home. For females like myself please show how to fix things without these equipments too. Also you should have shared the fuse changing too.
Thank you 😊 i got an idea from you. The fuse cuts the flow of currency if its dead, so just put a wire that runs aross the fuse to ensure the flow of current is not interrupted and its now working 💃💃
Lk 15. Good Sharing.
Very useful for all,TFS bahut acchi tarah explain kiya aapne 👍👍👍
Wonderful information jumma Mubarak bhi
ماشاءاللہ وااااااااااااااااہ زبردست 💕💕💕💕💕💕👌👌
you explained well and show good big thank you I learned something
Very useful information. Thank you. Happy weekend. 💗💗💗💗
*Nice knowledge sharing, very useful for this winter season, thanks stay blessed*
Thank you🙏…..Just fixed my first heater🙂
wow that is really pleasure for me
Thank you for the good guide! One question remains: What is still ok for the motor resistance? I have 52kOhm
Nice knowledge sharing, very useful for this winter season, thanks 👍
c m
Thanks brother a Very useful information. Thank you for sharing an other informative video, Be Happy & stay blessed.
Wonderful superb. I am your new friend and always full supported. Best wishes for you. Thanks 🌟🎁💖🍷
I understand stand now how to repair it today i was thinking about it and you have solve my problem thanks
Wonderful video as usual masha Allah
14lk
Nice sharing
Osm
Beautiful
👍👍😊
Amazing and very educative video , I learnt alot and very clear.
best regards and special thanks
Mind blowing performance bhai
😊😊👍🌺
Very helpful - thank you!
You're welcome!
This is good dear ad so useful information taking lessons hope to see u again
You doing great job. Thanks for.good vdo
Thank you. Got it.
You're welcome!
Very nice informative 👍
Thank you, I got to fix my fan, but I had to bypass the fuse tho, I'm scared to use it without supervision
welcome
please never bypass safety. as bypassing fuse may result a huge disaster
Really help mr
Awesome vid and great info 👍🏻
Thank you for informative demonstrating on how to fix the heater fan. I have subscribed to your channel. I have a similar heater fan but I am unable to unscrew that have Y heads. Could you kindly advise where to get the screw driver? I have been to hardware store and they have a full sets of screw driver and don't sell single Y head screw driver.
Lovely diy video Haseeb.
Thank you my friend you are smart
Great share thanks!
This is very interesting dear friend !!! Thank you for sharing this helpful upload !!! 👍27 Warm greetings from the sleeping
"Garden of Angels" in Austria......have a great Sunday.....Saderé💜
Thanks I just fix my fan without even using meter 🎉
Good work my Friend 👍👍⚡️🔥
Very nice maintenance , thanx bro
Always welcome
Good morning wood good work 🌺
6👍
V useful information fr good job
Thank you for such an informative video. Any chance you could help me troubleshoot a fan heater problem that heats for a few seconds then stops due to the thermal switch clicking open? The fan works perfectly. I’m not sure if I need to replace the thermal switch or another part. Please, can you help?
best regards
thermal protection trips off when there is inadequate air flow through fan heater, and the temperature in heater area increases, in that case thermal protection gets activated and protects the heater.
you can send a picture to whats-app 00-962-79-11-61-084
@@HaseebElectronics i have same fan heater but the connection where the coil joints are white plastic corner burnt and broken off So now I can see glowing light in connection wires Do i need to change that plastic white element part?
Would u have to reassemble the powercoils to just use the fan without the heating element.or would you need to add start capacitor if u bypass the thermostat cord.
My heater was not switching on and I did this but now it's only blowing cold air. Could u please refere me to a video you made or know that explains how to fix the heating element
please check this video ua-cam.com/video/OlBPh6T7qpA/v-deo.html
i hope it will help
Fan repairing superbb😀
@@HaseebElectronics thank you 😀
Good vdo thxx for sharing
Hi..... The fan of my heater doesnt work and all other parts are OK.. What is problem in fan motor?? Can be repaired
Very good 👍
best regards and special thanks
thank u sir my problem solv
best regards
Which connector did you take it off to bridge
Like 18
my daddy fixed our fan heater too
My thermal switch is toast any suggestions
Salaam wucyclum brother jazzallah khiar for the video and help, I put a new fuse and then goes cut off and then come back on.It doesn't go to hight temporary.The fuse is the same thermal cutoffs type SF119E rated ope temp 121°C. What do you thing brother need bigger fuse. Stay warm model F2003WH voltage 220-240v-50Hz 1800-2000W Batch DXF0039266
Good video, but the really critical bit is missing: what fuse did you use and how did you replace a broken fuse which looks as if it is riveted in place?
it is SF214E 250V 10Ampere thermal fuse. it is used when thermal switch or thermostat can not open teh circuit or air flow stops due to any obstruction in air inlet or outlet, the inner temperature will increase withing the heater body, so this fuse will disconnect the circuit as a last step in safety
For my case, the fan runs well but the heating element is not working. Can I use any electrical 10Ampere fuse? Getting the very specific fuse is difficult.
10 ampere normal fuse works normally but it will not act in over temperature condition.
it's safety will bypassed
in case any obstruction in air flow will cause to catch fire
Am și eu unul la fel unde pot găsi acea siguranță aștept răspuns
Hi...where can I purchase the fuse & Switch Rotary Switch (5 pin) . Pls help bro 🙏
you can purchase online from Ali express, amazon, banggood, digikey,
Do you solder the new thermal fuse
thermal fuse must be crimped
it can be soldered, but it need very careful soldering, otherwise it melts out rapidly
There’s no space to crimp on my heater I’ll need to solder
Pls tell me how to connect fan motor 2 wiring goes at ??
Do you know how to fix a Holmes
HFH131-TG Personal Fan Heater with Manual Control?
NinthBggg lkkk gud bro informative vdo💐💝💐
awesome lk 15
Hello sir
Micro switch in my heater is by passed and the fan is now working but not the heat .
Mine is difrent it have a display.
check the heater wire for continuity
if it is display based then might be there is a control relay for heater
Asalamo Alikum Bhai Saab
How do you test the selector switch
Make a video on how to change round heating element in fan heater
My one it’s fine and the fuse it’s fine but works only on the second speed !! No first speed any ideas???
possible cause, might be selector switch, or heating element low heat section is open circuit
I thought it maybe the switch I’ll try and post the comment below thank you very much!!
🔥🔥
Buongiorno, ho una stufetta che ha solo una manopola. La resistenza diventa incandescente e stacca. Ho cambiato il fuse perché interrotto ma ancora fa il difetto. Cosa mi consigli?
Hello thank you for inviting me to join your interesting channel full support returned
Sir, what is the function of temperature switch?
temperature switch or thermostat or thermo switch or temperature activated switch
it makes or breaks the electrical circuit at a spiecific temperature
Thanks
Ncce wrk bro
What is the power of fused that you replaced.
its part number is SF139E 250V 10 Amp 142 deg centigrade thermal fuse
it is thermal protection fuse
@@HaseebElectronics this is what I'm searching for, thanks, very helpful video,
It is my pleasure
12 like 👍👍👍👍
Mashalah
Hi wats it orpat heater same issue
did you fixed it or not. if not, send its picture to my whatsapp 00962-79-1161-084
@@HaseebElectronicsnumber isd
00962791161084
Lk 26 ❤❤❤👍👍👍👍
Mines warm up but won't spin the fan. Can it be repaired?
Yes it can be repaired easily
Check continuity for fan motor
Check switch at different positions and trace the connections
Check thermal fuses
Very dangerous elettrical bridge because it can burn and make flames
yes you are right dear.
Can u help me out
yes please, what i can do for you. it will my pleasure
Where is the fan repair? You fix the heater but not fan which is what I need. Thanks anyway
How to repair or replace fan
لايك
😍😍😍😍😍
it looks and sounds like the fan bushings need oil, too
@@HaseebElectronics a little silicon oil. thanks!
What if the cooling fan is working but the heater isn't heating up
please check thermal protection fuse, thermostat switch , heating element and temperature control switch (front panel)
London people through out. no repair.
yes dear you are right. i western countries it is same scenario. but if it is repairable at low cost then it must be repaired instead of throwing it away at minor faults
repair heater
👏👏👏👏👏👏💖🌻
My thermal switch is toast any suggestions