thank you, I'm just learning, brand new and i believe i dropped black ink in the box as I was emptying out it, it now says I need a new box lol before i even got to print DTF, I see amazon has the exact resetter set with maintenance box. God Bless, you continued success and thanks for sharing 🔥
@@nwambushwhat is the inside diameter and does it slide on and stay on ? I got a fuel line for a mower that was recommended and it didn’t fit without a slit and I get a ton of splatter and have to keep paper towels in the box
No videos. But bch printing makes insulation gasket where your damper hooks to your carriage. Can’t add a photo but they do it. It will be in my next video.
I noticed that you still have the white plastic piece at the entry for the hose still attached on your 2nd device with the waste bottle. Does it matter if that piece is removed?
Have you check your nipple that sticks out of the machine that goes into waste tank? Also make sure the print didn’t come off old one and is still on there.
Your design expertise is unmatched! 👏 Have you explored the world of DTF printing for your branding needs? Join us in our latest post to learn more about its benefits! @fastdtftransfer
thank you, I'm just learning, brand new and i believe i dropped black ink in the box as I was emptying out it, it now says I need a new box lol before i even got to print DTF, I see amazon has the exact resetter set with maintenance box. God Bless, you continued success and thanks for sharing 🔥
youre a life saver
@@JasmineJMartin glad it helped!
Where do you get the correct size hose ?
I got mine from Amazon.
a.co/d/8w9wr99
@@nwambushwhat is the inside diameter and does it slide on and stay on ? I got a fuel line for a mower that was recommended and it didn’t fit without a slit and I get a ton of splatter and have to keep paper towels in the box
so is it the 2x3 mm hose we get from Amazon and where do we purchase the chip resetter?
Yes got it from eBay.
2x3 is far too small.
Where can you buy chip reset ?
Got mine off eBay. Just make sure you get it for right printer.
Good video
@@ramellosugahill7260 thank you very much
Did you give the size of the hose i watched twice but didn't get it.dnt no if in hard of ears
Hi thank you so much for making this video. My GY and PB leak at the front right corner. Do you have any videos on how to fix this? Thanks
No videos. But bch printing makes insulation gasket where your damper hooks to your carriage. Can’t add a photo but they do it. It will be in my next video.
I noticed that you still have the white plastic piece at the entry for the hose still attached on your 2nd device with the waste bottle. Does it matter if that piece is removed?
No it does not.
If you have never used your waste tank and you use an outer waste tank do you still have to reset the waste tank chip?
Yes you do.
@@nwambush Okay thanks
Do you have a link please ?
a.co/d/26iFDfz
I have several new waste tanks, but I can’t get it to go back in place. It is as if something is stopping it from sliding back in. What is the issue?
Have you check your nipple that sticks out of the machine that goes into waste tank? Also make sure the print didn’t come off old one and is still on there.
Your design expertise is unmatched! 👏 Have you explored the world of DTF printing for your branding needs? Join us in our latest post to learn more about its benefits! @fastdtftransfer