[@jimclark576]

Good job, and I appreciate the scripture too. 👍👍

[@MikeHaduck]

Thanks Jim, I appreciate that, I get good comments about the proverbs, mike

[@jimt902]

Nice job Mike and I still get a kick out of hearing Castle. Dang fine tune.

[@MikeHaduck]

Thanks Jim, mike

[@cdbflynow]

Nice little pro bono work. You're a good man MIke.
Paul

[@MikeHaduck]

Thanks Paul, mike

[@paulsautocm]

Mike only deals with honest guys, no wise guys. Keep up the great work, thanks for sharing.

[@MikeHaduck]

Thanks paul, mike

[@loslos1462]

Ain't no big deal,Mike!! Thanks buddy!!!

[@MikeHaduck]

Thanks, Mike

[@BillLowenburg]

Nice job, it took five minutes in real time. A Bucks County PA mason would charge the homeowner 500 bucks at a minimum for that job. (plus probably $199 beforehand for an estimate) Northeast PA is lucky to have you, Mike. I just bought cement today to repair my foundation, which I learned how to do from watching your videos. Keep up the good work and thanks!

[@MikeHaduck]

Thanks bill, actually it was a freebie, and for something like that I don't think I will feel right charging more than a case of beer, lol, mike

[@bonanzatime]

I would have charged you $99.
Back in the 1990s. ..I don't know what I would charge today.?

[@charliereed4642]

Hey Mike
I’ve only watched a few of your videos but really appreciate you taking time to set up camera and video the job!!
You have a very pleasant manner, yet very informative and understandable teaching style....keep up the good work
Thanks!!

[@MikeHaduck]

Thanks Charlie, mike

[@stypsy]

Great video as always Mike! I just replaced my clean-out door 2 months ago. Wish I had waited to see this video because I forgot to open the door and apply see-ment from the inside. No worries, if it falls off, I'll now know how to install it properly. Love your videos!

[@MikeHaduck]

Thanks Sty, mike

[@cndbrn7975]

Honest Jardy had to return that dig. A little "shoddy" lmao

[@MikeHaduck]

Thanks Cnd,,,, mike

[@rafaelmarin1963]

I love these videos!

[@MikeHaduck]

Thanks Rafael, mike

[@sherrismith6136]

It's good to know you're both good at your craft.

[@MikeHaduck]

Thanks again Sherri, mike

[@mdouglaswray]

Great video! Thanks Mike!

[@MikeHaduck]

Thanks Doug, mike

[@suep4530]

nice quick repair!!! so glad I don't have to worry about that.

[@MikeHaduck]

Thanks Sue, mike

[@RD-sl8yl]

Every time I have a mason job I know where to check!! Thanks for the awesome videos!

[@MikeHaduck]

Thanks, Mike

[@joedominick7517]

No Big Deal way to go Mike!

[@MikeHaduck]

Thanks Joe, mike

[@Eman85515]

Thank you Mike 🍂🌼🍂

[@MikeHaduck]

Thanks Eman, Mike

[@paulsimkins3895]

👍👍👍great job mike

[@MikeHaduck]

Thanks Paul, mike

[@gregoryanthony3540]

Another good job.

[@MikeHaduck]

Thanks Gregory, mike

[@chadmyers4432]

Thanks Mike i don’t see many of those in ATL, but if i do I’ll be ready! 👍🏻

[@MikeHaduck]

Thanks, mike

[@mrfranciscojuarez187]

Thx for the video.

[@MikeHaduck]

Thanks Francisco, mike

[@brianmoore5498]

just like downtown! very nice

[@MikeHaduck]

Thanks Brian, mike

[@ramonpaulino102]

Good video thanks 🙏

[@MikeHaduck]

Thanks Ramon, Mike

[@2late704]

for perfectly fixing the door, sometimes i used to put the chimney door inside to a half~1inches from the wall when it was constructed.

[@MikeHaduck]

Thanks, anything that works, it good to hear from professionals, mike

[@Gunrunner4532]

Thanks for the video and the Bible verse.

[@MikeHaduck]

Thanks Ross, mike

[@gibsonbuilds4841]

Second comment.. yes!! Good rain day job. 2 days of heavy rain here in eastern pa.

[@MikeHaduck]

Thanks Gibson, yep still raining here, mike

[@jimcramer9656]

@@MikeHaduck it will be snow soon!

[@roccoconte2960]

Surprised the cement sticks to the metal, good video Mike.

[@MikeHaduck]

Thanks Rocco, mike

[@roccoconte2960]

@@drcornelius8275 i think your mixing apples and oranges re bar with groves on it tied together inbeaded in the middle of 12 inch concrete and the back of a small metal door with a 1 inch flange are quite different i not doubting it ,it just surprises me.

[@roccoconte2960]

@@drcornelius8275 who said anything about sidewalks?i think your taking these a little to far , #10 w,w,mesh schould be in the middle of the slab not bottom , you need to chill.

[@robstephens]

You might want to seal around the door with some "Duct Seal" which might further improve the furnace efficiency. It looks and feels like play dough. You just get a piece of it and rub it between your hands and form it into a long string and press it in place. It doesn't harden and is easy to remove.

[@MikeHaduck]

Hi Rob, I never used it but anything that works, thanks mike

[@saviotoronto358]

nice to put out videos where stuff gets done

[@MikeHaduck]

Tha is Savio, mike

[@nishaparulekar9488]

Great video. Our clean out for fireplace is in basement. Noticed water leak around the frame. Should we call Plummer or chimney repair specialist?

[@MikeHaduck]

Hi Nisha, I would see if you have a chimney cap first sometimes the ground is pitched towards the chimney and water will soak through also, , I would check that first, thanks Mike

[@acorntree404]

LOL, You guys should set up "Shoddy cement & plumbing Inc."

[@MikeHaduck]

Thanks, mike

[@nishaparulekar9488]

Thanks. I noticed water leaks around clean out door frame.should I call Plummer or chimany repair guy. Our clean out door is in basement.

[@MikeHaduck]

Hi Nisha, I would see first if you have a cap on top of your chimney, maybe it is the rain getting in, thanks Mike

[@DanHenryx]

Mike, my cleanout door is not closing. it's cemented in good, and I scraped off any paint/cement around the edges of the door and the frame. I think the door is curved out leaving the gap where it won't latch. Can this be repaired/bent back in shape? Or will I just crack it in half trying to bend it so it closes?
Should I just use Duct Seal to make up the gap at the latch and at the top and bottom as it tapers to the hinge, like the guy below suggests for making the door seal well?

[@DanHenryx]

UPDATE: I tested with a piece a paper at the hinge end to see where it was binding and sanded the door and the frame down with 80 grit sandpaper. at those spots for about an hour - I got the door to close more or less. Now my challenge is to rebuild the latch end. The door part of the latch is in good shape, still has the edge that is supposed to catch on the tab notch, but the frame tab has lost its notch, it's just smooth where the door patch crosses it.

[@MikeHaduck]

Hi Dan, I seen some plumbers seal it with a putty, but eventually you could replace it, thanks Mike

[@MemoGrafix]

*_Hi Honest Mike:_*
I know this is off topic. I have new shed I want placed on a concrete pad.
The shed is small 6'X8' steel. I got a very short window of time to have this shed assembled.
1. I'm in Buffalo, NY. Temps go below 0 degrees in winter.
2. Soil is rich, Black with grass and level (no slope).
3. How deep should I dig the earth out (I assume 4"-6")?
4. Do I need gravel laid first? If so how many bags
5. Do I need Re-bar?
6. How many bags of concrete mix
7. Should I rent a cement mixer for a small shed?
*_Thanks in advance for Your advice._*

[@MikeHaduck]

I can't tell you what to do, but to me it looks like a little less than a yard of cement at 5 inches thick, I'd probably order a truck with a yard , and I like at least 4 inches of gravel underneath, but that's me in my area, every Mason thinks different, thanks mike

[@MemoGrafix]

@@MikeHaduck - Thanks

[@MemoGrafix]

@@drcornelius8275 - Air Entrained.
I researched what that means, definitely not what I thought at first.
Vvery cheap "insurance" I will say.
Thanks for the info.

[@MemoGrafix]

@@drcornelius8275 - Thank VERY, VERY much.
Well it looks like I'm gonna have to order a concrete service to pour. My back aches alot anyway.

[@corbo1130]

Is there another product other than cement that is used for a job like this?

[@MikeHaduck]

Hi cor, I don't know but I would imagine it should be fireproof, Mike

[@borys444]

Rapid set products seem to have a higher PSI strength than Sakrete, y is that?

[@MikeHaduck]

Hi Nicholas, I can't say, if I want it a bit weaker I might add sand to the cement all, everything depends on what I am doing , thanks mike

[@spenmac]

Looks like some one got a haircut, I was thinking is this an older video, coz Mike looks a bit younger 😎

[@MikeHaduck]

Thanks, mike

[@Natural-Causes]

Couldn’t you have used a construction adhesive as well?

[@MikeHaduck]

Hi, those bonding agents are helpful in some situations but there was none when I started, 90% of them are not needed and i almost never use them. In masonry the old timers made there own with wetting it first and a slurry of cement, thanks mike

[@bonanzatime]

Trowel?! I don't need no stinkin trowel..😉😆

[@MikeHaduck]

Thanks, Mike

[@andysierra5657]

How much a job like the cost ?

[@MikeHaduck]

Hi Andy, that was a 25 minute job for a friend, I got a sandwich and coke for it, thanks Mike

[@andysierra5657]

I’ve tried to have someone do the job but it seems like no one wants to tackle it ! And I was just curious if it was an expensive fix or people are just afraid or don’t even wanna bother with it .

[@sherrismith6136]

Whoever is talking in your background needs to be quieter. I'm enjoying your handiwork. Great job!

[@MikeHaduck]

Thanks Sherri, mike