WORLD'S FASTEST PRINGLES - Sabot Fuel Cannon
Вставка
- Опубліковано 6 вер 2024
- Snacks are being delivered in record time with The SPUDS - Saboted Pringle Ultra-Fast Delivery System. This over/under double barrel toy Pringle cannon has been put to the test and can send an entire stack of Pringles really far, really fast.
Check out the build video here:
• 7ft Pringles Fuel Cann...
------------------------------------------------------------------------------------
Be a part of my Patreon crew for exclusive content, 3d files, and get your name on my work table!!
Patreon: / jairusofall
-----------------------------------------------------------------------------------
www.amazon.com...
^^^These are affiliate links that give me a commission! Helps my channel! Saves you time!
Music from EpidemicSound
www.epidemicso...
------------------OTHER STUFF------------------
Email: jairusofall@gmail.com
Instagram: jairusofall
Facebook: / jairusofall
Twitter: @Jairusofall
Patreon: / jairusofall
Sponsorship Inquiry: bsearcy.joa@gmail.com
Now you need to make a All-Pringles, Fin-Stabilized Discarding Sabot (APFSDS) projectile. Just a dart made of pringles.
No. A Pringle minigun or sniper
@@thekingofgamers3350 _or sniper_ lmao
Honestly mashing Pringles into paste and reforming them as a dart would probably be easier than launching them in chip form.
@@the_inquisitive_inquisitor Yes, exactly.
Armor piercing fin stabilized discarding pringles
APFSDP
I miss my cannons... back in the day, like 15 years ago, I was a member of the single greatest forum; the spud gun technology center.
There are things you did here that were almost perfect. The chamber fan! So good for mixing the chamber well!
Metering the propane to the exact ammount is great, but you have to measure it by volume of your chamber and the volume of the meter going the gas law (p1v1)=(p2v2) where the volume of propane is 14% the total volume of the chamber. Then, you use a pressure regulator on the lp tank to find the pressure and volume of the meter...
If you wanted to better control the speed of the projectile, I recommend building a pneumatic cannon.
Yes to the pneumatic cannon. My Dad built us a huge pneumatic spud cannon when we were young that used a sprinkler switch as the air valve, it worked famously. If I remember correctly, it went at least 200+ yards at a 45 degree angle. I wish we still had it!
It is deeply satisfying watching the sabots work in slow motion. Maybe you could try making a kind of shot out of cereal or jellybeans?
I want to see ice cream cones, the pointy kind :)
@@sortaspicey9278 would be awesome if they shot like badminton shuttle cocks!
Jellybean shotgun. Yes.
@@simoncleretide kinda like to see marshmellows
I'm guessing jellybeans would be the better of those, since they are more dense.
Lays Stax are roughly the same size as Pringle’s but they are thicker, might hold up better.
also pringles are made of potato pulp, not just potatoe slices
That looks so f**ing cool. The way that the thing bends, and flips, pushing out the Pringles... Wow!!!
I approve of the use of EVA foam in this video! Great work Jairus. =D
It seems like you could use that thing as a paintball bazooka. Also, someone feed poor Bryce.
The amount of science is highly appreciated
I'm so shocked at how far this shoots
Absolutely ridiculous project, and absolutely incredible result. This was just, amazing.
Oh to be a bird around your house right now. 😂
Everything about this project is fantastic fun, really nice work! Never commented before but got to say all your content is super entertaining. Ammo idea to launch from the cans, Glow stick flechettes at dusk/night.
That is an anti-tank rifle that shoots Pringle cans... GOOD GOD I LOVE THIS
This was such a fun "1 day build". Great job! I'd love to see gummy bears/worms/sharks etc.
seeing awesome projects like the mantis blades is cool, but seeing you make something fun and obviously enjoy yourself doing so is a lot more fun to watch. this is such a silly but rad project
I feel like your editing and video-making style has changed in the past couple of videos. I really like it!
This is just pure fun! Love how you modified the sabot rounds to find what worked best. But the icing on the cake. Was that dip round. That was hilarious. Thanks for the much needed laughs.
I love the testing and iterative design of the sabot. 💙 I'm taking notes for Nerf.
sorry but nerf exclusively uses flywheels now
I haven't laughed this hard in weeks!
The slow mow of pringles raining down over the picnic was beautiful.
@6:30 lol... "Task failed successfully!" you officially turned the pringles back into the potato flakes they were made from! a De-Pringle-i-nator gun!
Alright the wait was worth it!! Haha 😀 the video was great thanks!!
Legend has it, Bryce is still hungry.
Great way to tactically feed the birds! The gun in general looks very cool.
It's like Stuff Made here, SmarterEveryDay, and Taofledermaus had a baby channel. :-D Love it! Definitely subscribed.
I am so utterly impressed . . . by your awesome, green, manicured LAWN!
“The cardboard is reinforced with duck tape” is the most beautiful thing i have ever heard
This is my favorite project of yours. It's stunningly beautiful. Both the model of the cannon, and the efficacy of it's shots. ❤
"I attached a camera tripod so I could aim and fire Pringles more consistently and accurately" is not a sentence I'd thought I'd ever hear
Love that "thump" noise. Very cool spud thrower.
How's you not gotten a Guinness world record for first of its kind : the 7ft long, pringles discarding sabot, propane fueled, breach loading blunder buss... Of doom!! 😂😂
The pringle petals in slow motion looks very pretty.
I absolutely love this build. You know people just don't get you have to take a break from something sometimes when it's got you frustrated and then when you do something else you can look at the thing that's got you frustrated with a fresh set of eyes!
Oh that was 14 minutes of build up to one heck of a finale!
I learned something - had to google what saboted means lol - I knew you were a jack of all trades, impressed that your vocabulary is included in that. Kudos, smart fella'
Jack of all trades except landscaping* by the looks of the side of the house lol.
Not me unironically eating Pringle's at 2:40am and stumbling onto this video😂
suddenly got a craving for potato chips for some reason ;) This thing is awesome!
The UA-cam recommended gods have smiled upon me
This guy basically made an oversized loch 'n' load from TF2 that launches Pringles.
Pringles HEAT shell.
Why do I love this so much?
Butter and popcorn would be something neat to look at.
I enjoyed watching the spiral of the sabot the most lol
Awesome, the world didn't know it needed one until now. As ideas for the payload, rose petals for the best wedding gift delivered with 33G's! The "love cannon", ain't there a 70's band with a similar name?
You know what you should slow-motion fire out of it? A whole sabot worth of gummy bears and skittles. It wont powder them, but the rainbow of sugar will be quite glorious
Adam Savage would be proud
You are literally my hero.
Looks like that snap when the Pringles can opens and folds back adds a bit of energy to the equation as well...
2:30
Doom 2025 : Super Ultra shotgun
Sabot looks incredible
Please tell me you've reached out to Pringles. This is marketing gold.
one over sight that would probably get you better results. contour the foam at the base of the pringles pack so it follows the curve of the pringles.
me sitting in my chair wathing youtube while there are guys like this who make food artillery from scratch.
Burritos at high speed sounds like a great idea.. lol 😆
Ngl I think the sabot design process was coolest part of all this
Edit: ok it's a close tie between the sabot and that dip grenade. That thing worked flawlessly!
Orbeez shotgun spread. And damn nice seeing all that work pay off at the end.
Dude it’s a perfect Tshirt cannon !!!
This is what science is for. Loved this project. Great student competition
The pay off of the dip shot made it worth the whole video.
Thst last shot with the chip and dip was accurate as all hell!!
The heartily best waste of time I´ve seen in a loooong time, pure joy and fun!!! 😂
"Oh, what caliber is that in?"
"90x242 pringle"
You come up with some awesome projects.
This dude could actually engineer a mortar in the field.
It must be glorious to have so much free time and free will as to make a Pringle canon.
If you kept it firing really fast and sending out powder you would've had the coolest chip shotgun ever, but the final result was epic
You could fire a large pringle can with smaller pringles cans inside as cluster charges haha
Everybody is gangster, until it starts raining Pringles®
this is definitely a video pringles *should* have sponsored
Love it :) i want Pringle’s now
At first I was like why chips instead of tennis balls or something reusable.... Then I seen the dip. I was wrong to question your ways. Trust the process haha I love it! Keep up the good work
this is why i love the internet
I think this is one of my favorites
Oh all those delicious Pringles!
This seems like a real YT banger.
when you take into consideration that Pringles are just mashed potatoes formed into chips its no wonder they crumble, but that is AWESOME!
Excelent Pringles commercial
Jairus, you represent the best of PA. Excellent work.
The picnic part gave me over the hedge vibes
Great video,it would be crazy to see how many nerf darts you launch out out it.
Double-barreled snacktime - 2021 ( this guy)
Awesome! It's almost like you intentionally designed the sabos to spiral away after flipping! This was a great project.
The evolution of the unfolding can is very cool. Engineering at work. Most people would give up way before this stage.
This is making me want Pringles
"Im not wasting em"
Got me laughing
This sounded like something I would have seen on taofledermaus video... I am impressed and I want to make one now.
What a wild time to be alive!
Yes
I love the sound of it
I really want Pringles now.
You could try a drogue chute on the back of a normal can, might keep the pringles together longer and protect them from the wind?
this is nice to use in a nerf war
imagine trying to play normally when all of a sudden you see a whole can's worth of potats flying at you
god bless you and your work
It must take forever at the Pringles factory for them to find the perfect shaped chips to stack them perfectly and make them fit into the package like that
Bet the seagulls would love this one.
This is the real golden wind :D
I genuinely full bore belly laughed at this absolute masterpiece.
you've discovered the secret to creating cloudy with a chance of meatballs IRL
That was awesome!!
now you gotta get them as a sponsor lol
This is why the internet was invented. ❤️
I initially thought that was an amazing way to show your hatred of pringles.
But then you ate them and blew my mind.
Things to shoot out of SPUDS:
Tennis balls
An Eggplant
Tomatoes (try to fire as slow as possible and shoot it as far as possible at the same time so that it doesn't immediately do the SPLAT after launch)
Mashed Potatoes
Apples
Knives (try to make a knife stick in the target)
Balloons filled with paint and shoot them at a white wall to paint it
Empty/full cans of beer
Just to name a few.