Sir, thank you so much, for taking the time, in a few short minutes, to explain the fundamentals to get moving in this chair. You couldn’t have done any better!👍
Greeting How is my control of my chair, water fell on Qantúm where it is charged and I did not realize that it was wet and I put it to charge and now it tells me on the control screen configuring the network and nothing does not work What What can I do in that case, please, I would like you to tell me.
We added a link to the Quantum fault codes above for your reference. Still, these codes only tell you what the system believes to be the problem. Most of the problems that occur are computer-controlled systems and require dealer intervention. Though, the most common error we see is accidentally bumping the yellow gear release levers on the motors and disengaging the motors from the wheels. You will get a "motor" error when that happens and just need to flip the yellow lever the other direction on each side of the chair.
Thank you for your informative video. What might be the issue if my seat is not elevated but I am still getting the red x ❌ and the chair isn’t moving.
Sir, I’m sorry to be a pain, but I have an idea, but I’m not an expert or that knowledgeable to come up with what I need. If a caregiver needed to retrieve my chair from another room, and I could write a, “Cheat Sheet”, for them, or perhaps laminate The first few steps; like 1-5, so they could move/drive my chair back to beside my bed, so I’m able to take command and tranfer myself, from my bed to my chair.
The easy way to change the time is to get to the settings screen that looks like a gear. Some dealers program this screen to be hidden from consumers (so you don't mess with settings that will mess things up!), so it is possible, even likely, that you will only be able to change the time with a dealer programmer.
Is there a way to lock the controls. I have kids around and sometimes they think it's funny to drive off on my chair. We're talking a 5yr old and a 7yr old. I need to keep them safe.
If you press "up" on the main selection switch, it will go through the various modes. One of those modes is "settings" as default...it looks like a little gear. Your dealer may have removed access to changing those settings, though. If they did, you need a dealer programmer to come give you access.
I have quantum q6 edge 2.0. the screen cut out and just went blank and now it's not working. What is the cause and how can I fix it. It made a few beeping sounds when she backing up and the screen just went blank it will not come on.
The most likely cause of the screen going blank is that it simply became unplugged from the rear of the chair. If it is plugged in, and you know the batteries are good, you most likely have a bad joystick.
First I need to see how yo.properly hook up two 24volt batteries to a quantum rival wheelchair and also need to see how the controller works. The chairs functions
Follow the cable to the back of the chair. There are 4 screws to remove the plastic back cover, then you can easily see where the joystick plugs into the power module.
Does anyone know why error code 42 will come up in the chair & stop it from working & resetting everything isn't working. We tried resetting battery, circuit breaker & more but the chair is stuck on stop mode error 42
For specific error codes, contact us at 724.228.4568 or your local dealer. Even if we have a code, diagnostics are often required to find the root cause of the problem.
A yellow minus sign shows the chair is in "speed inhibit". It is slowing the chair down because it believes you are tilted or reclined back too far to drive fast safely. Bring the chair back upright and it will change to a green dot and you'll get your speed back!
If you have no power at all, check and make sure the cable coming from the joystick is still plugged into the rear. If it is, chances are good it is a battery problem.
Sir, thank you so much, for taking the time, in a few short minutes, to explain the fundamentals to get moving in this chair. You couldn’t have done any better!👍
You explained it in a very simple and easy way to understand. Thank you!
Glad it was helpful!
Thank You for your great video.
Greeting How is my control of my chair, water fell on Qantúm where it is charged and I did not realize that it was wet and I put it to charge and now it tells me on the control screen configuring the network and nothing does not work What What can I do in that case, please, I would like you to tell me.
Thank you. Come join us for some of the bike rides in PA......yes bike rides. Just have to have the right type of bike and the right spirit!
We added a link to the Quantum fault codes above for your reference. Still, these codes only tell you what the system believes to be the problem. Most of the problems that occur are computer-controlled systems and require dealer intervention. Though, the most common error we see is accidentally bumping the yellow gear release levers on the motors and disengaging the motors from the wheels. You will get a "motor" error when that happens and just need to flip the yellow lever the other direction on each side of the chair.
Thank you for your informative video. What might be the issue if my seat is not elevated but I am still getting the red x ❌ and the chair isn’t moving.
If a chair moves slowly and backs up fast, where could the problem be?
my joystick won't charge. is that a joystick problem or a battery problem ?
how do you unlock that type of controller
My battery's are good but I get no power to the joystick it just won't turn on it dose nothing. Any suggestions?
Sir, I’m sorry to be a pain, but I have an idea, but I’m not an expert or that knowledgeable to come up with what I need. If a caregiver needed to retrieve my chair from another room, and I could write a, “Cheat Sheet”, for them, or perhaps laminate The first few steps; like 1-5, so they could move/drive my chair back to beside my bed, so I’m able to take command and tranfer myself, from my bed to my chair.
does anyone have a videio showing how to use the joystick in the back for caregiver?
This helps. Ty
Can you tell me how to change the time? We are in the setting, change the hour, but when we exit, there has been no change. TIA.
Tammy Weiland please call our tech department at 724-228-4568
The easy way to change the time is to get to the settings screen that looks like a gear. Some dealers program this screen to be hidden from consumers (so you don't mess with settings that will mess things up!), so it is possible, even likely, that you will only be able to change the time with a dealer programmer.
Is there a way to lock the controls. I have kids around and sometimes they think it's funny to drive off on my chair. We're talking a 5yr old and a 7yr old. I need to keep them safe.
I have a problem with my chair, which does not drive, it says charger inhibit error. What can I fix it
How do you turn off rrunning lite
I have a quantom q 6 edge
& the button across from the
Seatlift button dose operate
Any of the functions.
So what dose it operate?
Is it possible to increase the speed on a Quantum wheelchair?
It is possible with a dealer programmer only.
I have a quantum edge series 2.0 that’s throwing a code 62 can you in for me more on this?
so glad i have a P5
I cannot get the just the back of my chair to recline cannot figure out what I'm doing wrong
I Need a new joy stik for my quantum 6000Z
How do you reset the trip switch and alter the time
If you press "up" on the main selection switch, it will go through the various modes. One of those modes is "settings" as default...it looks like a little gear. Your dealer may have removed access to changing those settings, though. If they did, you need a dealer programmer to come give you access.
Need help with menu (settings), and no help was given.
😅😂Dose anyone have a joystick for a quantum 6000 z
2:35 anyone know why mine only goes from seat and seat and back? Not just back
I have quantum q6 edge 2.0. the screen cut out and just went blank and now it's not working. What is the cause and how can I fix it. It made a few beeping sounds when she backing up and the screen just went blank it will not come on.
The most likely cause of the screen going blank is that it simply became unplugged from the rear of the chair. If it is plugged in, and you know the batteries are good, you most likely have a bad joystick.
First I need to see how yo.properly hook up two 24volt batteries to a quantum rival wheelchair and also need to see how the controller works. The chairs functions
The second one M300 is showing a lock on the screen
I need a joystick
Do you have a video showing how to disconnect the joy stick fromthepower
Did you ever find a to your question about disconnecting joystick?
Follow the cable to the back of the chair. There are 4 screws to remove the plastic back cover, then you can easily see where the joystick plugs into the power module.
What’s the error #70
Does anyone know why error code 42 will come up in the chair & stop it from working & resetting everything isn't working. We tried resetting battery, circuit breaker & more but the chair is stuck on stop mode error 42
For specific error codes, contact us at 724.228.4568 or your local dealer. Even if we have a code, diagnostics are often required to find the root cause of the problem.
I have a yellow minus sign in green circle what do i need to do to reset
A yellow minus sign shows the chair is in "speed inhibit". It is slowing the chair down because it believes you are tilted or reclined back too far to drive fast safely. Bring the chair back upright and it will change to a green dot and you'll get your speed back!
the control of my chair does not turn on help me please
If you have no power at all, check and make sure the cable coming from the joystick is still plugged into the rear. If it is, chances are good it is a battery problem.
we must have an older model
#94 error code
Can someone please help me?
Doesn't seem like anyone monitors this anymore.
how much are the chairs
Maureen Waller I invite you to call us at 724-228-4568. There are so many variables to pricing the chairs
Français