😎EPIC Traxxas XRT Hobbywing

Поділитися
Вставка
  • Опубліковано 21 сер 2024
  • Welcome back to the channel everyone. In this video I will test out the brand new #hoobwing #Max5 G2 250amps and the new 5690 1250kv sensored brushless can. This motor in my opinion is no comparison over the old 5687 1100kv can. With my #traxxas Xrt weighing in at just under 34 pounds this truck is tossed around no problem. At the end of the run the motor was not even over 120 degrees and that's running in thick grass also.
    I did have some technical problems but still wanted to finish my vid. SO if you are watching and reading BasherBodie! I appreciate you brother!!
    I want to thank you all for tuning in to my channel. Please dont forget to leave me a like and subscribe.
    #hobbywing56901250kv
    #traxxasxrt8s
    #jconceptschoppers
    #newhobbywingmax5g2
    If you see anything in this video you need for your Traxxas XRT ill leave a few links below
    If you are having problems fitting lipos into your #traxxas xrt or xmaxx check out these #pnwrcmadness HD carbon fiber Battery trays. They come with metal buckles and are made with Kevlar. And they will not break on ya.
    www.pnwrcmadne...
    Pnwrcmadness HD Aluminum 30mm screw spacing motor mount. These mounts are super tough and have been proven over and over by me and many others. These work in both your xmaxx and xrt
    www.pnwrcmadne...

КОМЕНТАРІ • 20

  • @SpeedSyko
    @SpeedSyko 7 місяців тому +1

    Dude, I thought I was the last of the belt drive users. Way better than gearing! Great build!!!!

  • @Stonew24
    @Stonew24 12 днів тому

    Great bash. Love the setup. What fan mount is that for the 5690 motor? Thanks

  • @gonzodetroitify
    @gonzodetroitify 11 місяців тому +1

    You are pumping out content like no tomorrow G😎🥳🥳 this rig is very sweet with what you’ve done to it 🤩🤩 and
    Nice of you to share💯😎

  • @RcpsychoRen
    @RcpsychoRen 11 місяців тому +1

    Awesome 😮😮. Good job

  • @dklien6443
    @dklien6443 11 місяців тому +1

    Im about to order that esc soon. Looks good man.

  • @paulrakis
    @paulrakis 11 місяців тому +1

    Nice man looks awesome with that belt drive and all. I just sold my xrt didbt like it. Had the max 6 and stock motor. I'm getting that 1250KV for my outcast 8S exb. Does it run hot with those fans?

  • @ImAcoastpedder
    @ImAcoastpedder 11 місяців тому +1

    Great video ! I’m building an New XRT Slider. Been into RC since 70’s. First real “electric” rig. I know I want MAX5. Absolutely can’t decide between 5690 or 56118 (1100kv). Emailed Hobbywing and they couldn’t really give me definite answers. Do you have an opinion between these 2 for an XRT ? There seems to be a ton of suggestions for MAX6 w/ Stock motor for dependability. Thanks for any help you can give regarding the 2 motor’s. 👍🏻👍🏻

    • @pnwRCMADNESS
      @pnwRCMADNESS  10 місяців тому +1

      Thank you so much!! That's how I built one of my xrts. Slider is the way to go imo🤙🏼 you'll have so much fun with the max5. And it depends on what you're doing. Both great options for sure, I like the smaller can motors. The 1250kv is smaller and yet still amazing power both low and high. (I always revert back to the smaller motor can.) The 1100 will be a power house too.
      My advice is to stick with a max5 g2 and either motor you will enjoy no doubt

  • @joshuakyle5015
    @joshuakyle5015 9 місяців тому +1

    How would you compare the stock motor to yours in terms of power.

    • @pnwRCMADNESS
      @pnwRCMADNESS  9 місяців тому

      I feel like it's more smooth. Its definitely faster with more torque, very noticeable while driving

  • @tdgshadow90
    @tdgshadow90 10 місяців тому +1

    Do you prefer this motor over the castle 1721?

    • @pnwRCMADNESS
      @pnwRCMADNESS  10 місяців тому

      I'm not sure yet. I really like the castle 1260 ALOT. But it has some draw backs for me. The can is longer and the 25mm screw spacing on it. It's hard to say yet. I really like the 1260kv for its buttery smoothness and smooth power.
      It's tough to say😫

  • @darren808
    @darren808 11 місяців тому

    So you can convert any rc to belt drive?

    • @samb1818
      @samb1818 11 місяців тому

      Yes

    • @darren808
      @darren808 11 місяців тому

      What parts I need to make my lmt belt driven. I got a mamba x castle 1515.

  • @basherbodies7285
    @basherbodies7285 11 місяців тому +1

    Im so bummed out it broke, it should never ever break,thats the whole point of getting something from us..... however; we alrealy investigated ,and found out what coused this faulty mount.. a new one is is shippd out within 24 hrs, and we know you will not break that one again.😉
    I do appologise for the flaw and the inconviniance🥲

    • @pnwRCMADNESS
      @pnwRCMADNESS  11 місяців тому +2

      Brother man! Its okay. I'll be having an unbreakable body on all my rc cars sooner than later! These bodies are absolutely the best ever!!!!!
      And I am excited to get back out again with the bull!! I love the style and it's uniqueness. I will continue to support you guys and know this is only a glitch

    • @basherbodies7285
      @basherbodies7285 11 місяців тому +1

      @@pnwRCMADNESS thanks buddy💯👍👍👍