@@exhaustaddicts Thank goodness that you're finally going to make that Best Drive offs video. That type of video is always my favorite type of video that I really like to watch these days.
Yes please that’s the sound I’m looking the deeper the better rasp is ok but I gottta say nothing beats the deep ton ! I wish I lived where you guys are at ! I have been watching your videos for the last year and a half. In fact you guys are the reasons why I purchased the carverTR for my tundra but do wish it was deeper! Thanks for the videos you really help us exhaust enthusiasts out in picking the right exhaust for our vehicles! Keep up the good work !
I would drive my 17' Chrysler 300 all the way from Cleveland Ohio for that to be put on it! I love that sound... no rasp and not too loud. Just a perfectly blended tone. That's awesome!
First go at it and he took all the rasp out! If he can keep doing that y'all will be making some extra money in no time! All while having more fun at that! way to go!
That’s sounds really good, now I need to see a cutaway version of it to see how it works. Time to take it to the bandsaw and show us what’s on the inside.🤪
That to me is the perfect sound. I've never liked the raspy notes some mufflers or lack of a muffler would make. I'd love to hear this on a Ford F150 with the 4.6 v8.
Gotta put a couple of these on a Crown Vic/Grand Marquis/Town Car with an X pipe and rear cat delete so I can decide if I want to swap out my Flowmasters!
Sounds good would love to see an in car driving down the road vid to hear if there is any interior drone. And I'm sure it would sound really good if was split into a dual tailpipe setup. But definitely love the low cackle aspect tho.
The real test will be is there any drone while cruising at any speeds or RPM's. Its easy to cut off a muffler and resonator and have it sound good while revving it and standing it on during a takeoff. Other than all that it did sound good.
Damn! That sounds amazing deep tone is where it at for v8 I have 2011 Toyota tundra I currently have carver tr sound good too but be quiet interested what my iforce 5.7 would sound like? We definitely need more on this muffler!
If you're not going to show a cutaway, or even a shot looking into it so we can see the construction of the muffler, it's fairly useless. There are good sounding mufflers out there already but if they don't flow extremely well, I don't see the point.
i’m thinking about bringing my 04 mustang gt roush to yall to have some pipe fabbed up. is there a way i could get an estimate? i’m all the way in atlanta ga
"sounds" like you guys know what you're doing
It’s just a pos knockoff. Nothing special about it.
Finally.... no raspy straight pipe sound! Sounds great!
Been following y'all for years now. Glad to see you making moves! Sounds great!
Appreciate the support! Glad you like the sound.
That rumble and tone is smooth as honey.
It sounds better in person!
Can’t wait for there production to begin on it!
that sounds like a perfect daily driver muffler
Nice work! 🤘🏻😎🔨 I’m digging the EA muffler. Sounds nice, nice tone. I’m impressed.
Thanks for checking it out! We're stoked on the sound too.
Great sound without the pop and clap. Good job guys!
Honestly that's super clean
I like that. First time and you guys did an awesome job.
Congrats.
Appreciate that, it was a blast to make!
Will you guys make a best drive offs of 2024? You haven't done that since 2022 and I really miss it.
Coming Soon!
@@exhaustaddicts Thank goodness that you're finally going to make that Best Drive offs video. That type of video is always my favorite type of video that I really like to watch these days.
They got a straight pipe of 2004 if that helps for the meantime 🤣
I like it, picasso. My two favorite so far are the FM Flow FX and this prototype. Good work.
Now try it on a 6.2 of the same year, and sell them online!! Glad to see you all making moves.
That's the plan! Stay tuned.
Yes please that’s the sound I’m looking the deeper the better rasp is ok but I gottta say nothing beats the deep ton ! I wish I lived where you guys are at ! I have been watching your videos for the last year and a half. In fact you guys are the reasons why I purchased the carverTR for my tundra but do wish it was deeper! Thanks for the videos you really help us exhaust enthusiasts out in picking the right exhaust for our vehicles! Keep up the good work !
2:46 that voice crack lol
I would drive my 17' Chrysler 300 all the way from Cleveland Ohio for that to be put on it! I love that sound... no rasp and not too loud. Just a perfectly blended tone. That's awesome!
Glad you like the sound, we think it's pretty perfect too!
First go at it and he took all the rasp out! If he can keep doing that y'all will be making some extra money in no time! All while having more fun at that! way to go!
That’s sounds really good, now I need to see a cutaway version of it to see how it works. Time to take it to the bandsaw and show us what’s on the inside.🤪
We've got some exciting things planned for this muffler in the future, stay tuned!
Thats probably proprietary information
Well done fellows, not to loud,not to soft, right in the middle.
Glad you liked the sound!
So what does the inside of the muffler look like??
Sounds great!
That has a real good tone to it. Personally I would have left the stock resonator on, but it was so clean with it off.
We agree, the tone is amazing! We're working on a few variations with the resonator still in place for future videos!
You guys nailed this one!
i see a V8.... i click. 👊
Good job on that resonator that's a badass tone
Sounds really nice for the first prototype muffler on a yukon 👌
That to me is the perfect sound. I've never liked the raspy notes some mufflers or lack of a muffler would make. I'd love to hear this on a Ford F150 with the 4.6 v8.
I'm impressed. You'll sell a lot of those
Its incredibly rare to hear a 5.3 powered truck that doesn't have the god awful clapping sound when you do a muffler delete/swap. This sounds amazing.
Gotta put a couple of these on a Crown Vic/Grand Marquis/Town Car with an X pipe and rear cat delete so I can decide if I want to swap out my Flowmasters!
Sounds awesome!
It does!
Sounds DANG good!!! I'd buy them!
should show what it looks like it sounds great looks like a straight thro reso but yall might be on to something
I like that let’s hear it on a 5.7 hemi
This!!
That sounds great. You guys killed it . Need to do some duals on a chevy so i can oder it
yall did good make more love to hear it on a sports car
Sounds good would love to see an in car driving down the road vid to hear if there is any interior drone. And I'm sure it would sound really good if was split into a dual tailpipe setup. But definitely love the low cackle aspect tho.
Dual tailpipe setup is definitely in the works!
would love one of these on my 01 tahoe. have you guys tested the drone yet
Sounds good ❤
Sounds friggin awesome guys.we need one for my Silverado 5.3 so i can have the only one here in Vermont lol
Better get that bad boy patented 🤘
It’s just a cheap eBay/Amazon muffler with their logo wrapped around it. Can’t patent what already exists.
I would love to get my hands on a few of these for my rides, might have to make a trip up there for some work
Sounds amazing
Finally; a LS that doesn't sound like Jed Clampett stormin' down ths street 😊
I’ll buy one!! I’d love it!
If you build it , they will come. Id definitely put one on my 5.3
It sounds realy realy good you did a good job making that if i could get one i would love to have one on my 02 suburnan
if u start selln them idc that im in louisiana i will come to tennessee and pay for the install i love yalls videos and i love that deep throaty tone
Ill take two once they go on sale!
That’s on point 🤌🏽
Oh im getting two of these when there ready.
I can’t wait to hear it on a 2022 6.2 please post a video when it’s available.
I can bring my 2016 Camaro SS if you want to use it to prototype mufflers for Gen 6 Camaros.
Well now I want one.
Now we need to hear it on a Nissan V6 and a boxer Subaru.
Sounds good 👍
HELL yeah. Gimme 2😤
Can we get a video of where and how these are made? I’d love to see that.
I want to put that on my Avalon. It sounds good
They actually made a quieter version of a Flowmaster Flow FX muffler or something similar to a Flowmaster Hushpower muffler.
You guys should work on trying to sell the Exhaust Addicts muffle. It’s perfect for daily drivers
Daaaaaaammn i want one!!!! How about the drone any feedback?
After you patent it break it down tell us how you did it.
I like the part where you showed the inside of it and explained what you made
That is sick
Where'd the 3rd cat go?? 👀 "fixed that pipe" 😂
It does sound good!
Let see if a Honda or any 4 cylinder engine sounds good with that muffler.
Now i wanna hear it on a car wirh no cats
I am very picky when it comes to exhaust and choosing mufflers. I would buy one of these.
Thanks for the support!
Do you wanna test one on my ford flex to see how it sound on a v6
Yall need to run your prototype on a classic with no cats just some shorty headers 👌
How soon till we can order??
If you make them and are willing to ship them out, I will buy one for my truck
When are they gonna be available for the public and rough estimated price?
Sounds great guys, what’s it look like inside the muffler is what I want to know
The real test will be is there any drone while cruising at any speeds or RPM's. Its easy to cut off a muffler and resonator and have it sound good while revving it and standing it on during a takeoff. Other than all that it did sound good.
Good point! We'll be sure to test that out!
Looks like stevie wonder welded that discont muffler 😮
Would like to see the inside. Doesn't sound like a straight thru but the can looks too small for it to loop inside like a turbo muffler.
PLEASE make these in a 3.5” inlet and 3.5” outlet center/center. I need one for my 17 Silverado 6.2
I’d buy some for my srt8 charger. I already have resonators deleted.
Damn! That sounds amazing deep tone is where it at for v8 I have 2011 Toyota tundra I currently have carver tr sound good too but be quiet interested what my iforce 5.7 would sound like? We definitely need more on this muffler!
Glad you liked the sound! We're working on it for sure.
I wanna try this on my s10
Arent these 6.2l?
can i order this online
What's the price on these bad boys
How much??
If you're not going to show a cutaway, or even a shot looking into it so we can see the construction of the muffler, it's fairly useless.
There are good sounding mufflers out there already but if they don't flow extremely well, I don't see the point.
can i buy one next? i’ll wait in line now
I'd buy one if you can ship to Canada!
I want one, how can I get one please? 🙏🏽
Put me down for 2. I want to see what it sounds like on a 5.7 hemi with true duals
How car pass emissions after muffler delete, answer me please, I wanna come and do it soon
If I come down. Try on my 2011 5.0
I’ll take one please. lol. Put it in my cammed Silverado lol
LET'S GOOOOOOO!!!!
Yall want to try one on a F-150 coyote? Would love to hear what the 5.0 would sound like.
Maybe soon! 🤘
Sounds great, welds look like shit though.
Great now you have complainers right in front of your exhaust shop lol
cheaper tho
i’m thinking about bringing my 04 mustang gt roush to yall to have some pipe fabbed up. is there a way i could get an estimate? i’m all the way in atlanta ga