24" Touchscreen Digital signage monitor. OS - Android Fully kiosk browser Dakboard Screensaver Home Assistant running on a Raspberry pi 4 with Argon m.2 case
I have the same type of thing in my house (not nearly as clean). I use a ELO touch screen comonly found in the service industry and a dedicated desktop pc to run the HS browser.
Amazing set up, just what I am looking for, as with the others below I would love to know what monitor that is, nice and flush with the wall, great job :)
Yes that's my thoughts too 😂 i think so because its to thin to have a raspberry pi in there or hisnusing a tabket motherboard inside but best change is that its exactly set up as a kiosk mode, bro, you just answer my question with your question 😂
Very nice! It would be great if you could share some setup pictures from behind. I have indetical screen but I need ideas how to put it on wall so nicely. What kind of wallmount did you use? Have a nice day
Sorry but I do not speak Polish but I translated your text. I really have not put 100 hours of work into this. It is a very simple installation. I installed home assistant for the first time ever on a raspberry pi a month ago: P
I have looked for the same or similar screen based on your comments reply’s, but I could not find it. Please share more info about the screen, I want to buy the same
Hey in order to have the touch screen sit flat on the wall, did you need to recess some of the back of the monitor (ie: cutting out some of the wall)? I did a quote request from numerous Chinese suppliers for touch screens (interactive signage), and none of them were only +/- 20mm depth. Most had a smaller portion of the back that added 25mm to 32 mm more depth.
@@GooliAth Thank you for replying back so fast. I used Global Sources to obtain quotes, and I found the prices were cheaper than Aliexpress. It took some time to filter through all the quotes and review pictures, dimensions, etc and find some that were capable of being flat mounted, with some cut-outs in the wall. The one I ended up getting a sample of, seemed very close to yours.. same proc (RK3288), mem, camera, etc. all for $300. plus shipping. Still testing it as it just arrived yesterday. You can tell it was built strong, as it is quite heavy. I wanted the same look.. something that looked almost like a picture with very low profile... which is more of a challenge to find.
This is the sample I ordered to try out: redhat.systems/touchscreen1/specs.png redhat.systems/touchscreen1/touch_1.jpg redhat.systems/touchscreen1/touch_2.jpg Note, the specs page shows a completely flat back, but, when manufactured they used a slightly different case that causes it to not sit as flat. The touch_1 and 2 show "as built" images.
@@rossellacarmisano8280 I use ffmpeg integration. my code for each camera looks like this: camera 5: - platform: ffmpeg name: "Garage" input: rtsp://NVR-USERNAME:NVR-PASSWORD@NVR-IP-ADRESS/cam/realmonitor?channel=5&subtype=1
I've just taken delivery of a couple of these beauties for a new renovation. I've gone down the same route as you with Dakboard and Home assistant. How did you set it up to require a touch on the screen to go back to the home assistant screen? I have the Dakboard set as the screensaver and lovelace as the start url but as soon as the camera detects me it goes straight to the start url. Also, did you cut a hole in the wall to fit it so flush?
I'm wondering if I should make a new video with a little more detailed information about the installation. there are many who ask and are curious about how I did it.
Thanks! Yes, that is correct. I have done a few upgrades and changes since i posted this video. I will try to make a new video with a bit more info as soon as I can.
I bought a pair of monitors like this through a friend in Germany. The screen is used to run Kiosk in shops etc. The only thing on the display is the spec, unfortunately no name. Android is running on the monitor. It has a built in Rockchip. So it's like a big android tablet. Here is the spec of the monitor: * 24 ″ Interactive Digital Signage * Quad-core Cortex-A17 1.8GHz, RockChip RK3288 * Ethernet RJ45, Wi-Fi 802.11 b / g / n.Bluetooth 4.0,4G * DC In, HDMI Output, 3.5mm Audio Jack, Micro USB OTG, USB 2.0 host, RJ45, POE, SD Card Slot, Microphone * Android 8.1 / 9.0
@@GooliAth it’s possible to ask the German friend if he knows where to buy one of these? I’m from Austria, not far away ^^ Can’t find anything near close as this model
What do you need explained? I bought a Android touchscreen, mounted it on the wall. Not that hard to do 😊 I then installed Fully kiosk browser on the android touchscreen. Home assistant lovelace via nebu casa and dakboard as screensaver. 😊
I bought a pair of monitors like this through a friend in Germany. The screen is used to run Kiosk in shops etc. The only thing on the display is the spec, unfortunately no name. Android is running on the monitor. It has a built in Rockchip. So it's like a big android tablet. Here is the spec of the monitor: * 24 ″ Interactive Digital Signage * Quad-core Cortex-A17 1.8GHz, RockChip RK3288 * Ethernet RJ45, Wi-Fi 802.11 b / g / n.Bluetooth 4.0,4G * DC In, HDMI Output, 3.5mm Audio Jack, Micro USB OTG, USB 2.0 host, RJ45, POE, SD Card Slot, Microphone * Android 8.1 / 9.0
I bought a pair of monitors like this through a friend in Germany. The screen is used to run Kiosk in shops etc. The only thing on the display is the spec, unfortunately no name. Android is running on the monitor. It has a built in Rockchip. So it's like a big android tablet. Here is the spec of the monitor: * 24 ″ Interactive Digital Signage * Quad-core Cortex-A17 1.8GHz, RockChip RK3288 * Ethernet RJ45, Wi-Fi 802.11 b / g / n.Bluetooth 4.0,4G * DC In, HDMI Output, 3.5mm Audio Jack, Micro USB OTG, USB 2.0 host, RJ45, POE, SD Card Slot, Microphone * Android 8.1 / 9.0
No, fully kiosk browser allows you to set times when the display is on and when it should sleep. If the screen is sleeping you simply just double tap it to wake it back up.
99.9% of home automation is for geeks who just want a reason to put a huge monitor on the wall. In the end, this eats up far more electricity when a simple light switch is more than sufficient.
Nice Set-up. Are you going to do a video about it? Thanks
I cannot imagine how much work went into that.
I’m thinking he could monetize it.
A Saturday
I have the same type of thing in my house (not nearly as clean). I use a ELO touch screen comonly found in the service industry and a dedicated desktop pc to run the HS browser.
Riktigt trevlig lösning. Funderar själv på att skapa liknande lösning med voice control.
Very nice. Looks like an IR touch frame around a monitor.
Finally I got the similar screen, will get it installed soon. Thanks sharing awesome work.
Got a link or information on the screen? Been looking for something similar to this myself.
@@muchachogrande2019 Planar Helium 24"
ua-cam.com/users/shortshontlm3pAIA?si=fqv7_POnvrmDBbYU
Amazing set up, just what I am looking for, as with the others below I would love to know what monitor that is, nice and flush with the wall, great job :)
I fell in love with ... Darth Wader LOLOLOL :-D
Nice looking true flat surface screen, impressive
Really nice, what brand is the screen?
If possible also create a video on the setup :)
also looking for this info
Any info would be helpful!
Yes, agree. Would like a really nice touch screen
still need some info xD
Has anyone got the info yet? 😂
I didn't expect that big screen :D
Fully browser with dakboard screen saver and home assistant as website for controls. Nice
Please expand. I have all the tools but I'm stuck with the process
@@boujee. What are you stuck on?
Nice. Do you have an HDMI running to the screen? Are your using a Separate PI for the browser kiosk?
Yes that's my thoughts too 😂 i think so because its to thin to have a raspberry pi in there or hisnusing a tabket motherboard inside but best change is that its exactly set up as a kiosk mode, bro, you just answer my question with your question 😂
Very very good!!
How are you gonna just make a quick video like this and not show us!
Make a video ! 😊
its called "flexing" ..."look what i can do and you can't"
Now that looks good
Ahhh no wires gorgeous
Curious, do you leave it powered all the time or do you use motion on/off....and how is it all powered?
Is that possible to engagjng a human detection sensor to switch it on and off?
@@mutuna1300 The front camera in a tablet can act as a motion sensor :)
He could put any kinds of motion sensor around the monitor so it turns on/off when someone approaches
Love to get some information on this build!!!
Awesome ♡
Well done. Sell them! This is what people imagined when they first heard "smart home. “
Amazing, sir. May I know if you did it or where you bought. I think it's may a good business for us
Greetings from utah . My friends and I would love to know what touch screen you’re using and perhaps a full video about this home assistant config ❤
We really need to find out how to get our hands on these bad boys
You make it yourself
Such a big screen is nice.
The downside is, compared to a tablet, that they has no sensors like microphone, camera, ambient light
This screen have all of those functions. 😊
@@GooliAthwhat screen is that?
He doesn’t tell anyone because his full of shit
It's very cool)
Jarvis, arm the defenses.
Wow😮
Very nice! It would be great if you could share some setup pictures from behind. I have indetical screen but I need ideas how to put it on wall so nicely. What kind of wallmount did you use? Have a nice day
Is there any way you can give me more info about the screen? I would love to do the same but can't find this type of screen.
Bro, what screen is this? Please do tell!
@@coachingreflexivo iiyama 24 inch touchscreen
Nice
Looks like its the "24 INCH INTERACTIVE DIGITAL SIGNAGE" from BaoBao Industries.
where can you buy this?
@@TheEricmuck Maybe you could ask the manufacturer directly
@@TheEricmuck On Chinese e-commerce platforms, you can get a 32-inch all-in-one for $300, with a choice of Android or windows.
If that would be in mate, it could look like a painting
Great! Please share with rest how you manage it. DAKBOARD doesn't have yet HA feature/integration, but that it's enough for!
I use Fully Kiosk browser. In fully you can set a screensaver. In this case I have the URL to my Dakboard page set as a screensaver.
Looks like the TouchWo on Amazon
I need this! Please make a tutorial video 😂❤
Could you tell me how did you achive this touchscreen monitor?
Add an interactive floorplan! 😃
nice
Awesome!
Wheres that background from? Love it
Snyggt! Vad är det för skärm?
It's nice n all but you need lovelace
Nice work!
How do you remove the side menu, do you use hacs?
Patrik my man, you can just leave us hanging like that without any details. What screen is that and how did you set that HA layout up? Thanks
Post that DIY up playboy
How about its power consumption?
I kilkaset godzin z życia na zabawę z Home Asistant. ;)
Sorry but I do not speak Polish but I translated your text. I really have not put 100 hours of work into this. It is a very simple installation. I installed home assistant for the first time ever on a raspberry pi a month ago: P
@@GooliAth you integrated all these cameras and sensors and built the entire frontend in one month?? Holy cow mate, thats impressive
I have looked for the same or similar screen based on your comments reply’s, but I could not find it. Please share more info about the screen, I want to buy the same
It's just a giant android tablet.
Har letat efter något liknande. Någr tips?
Hey in order to have the touch screen sit flat on the wall, did you need to recess some of the back of the monitor (ie: cutting out some of the wall)? I did a quote request from numerous Chinese suppliers for touch screens (interactive signage), and none of them were only +/- 20mm depth. Most had a smaller portion of the back that added 25mm to 32 mm more depth.
Yes, the ”sidewall” of the kitchen cabinet that the display sits on is cut out to make the display sit more flush to the wall.
Its not this exact model but its similar
a.aliexpress.com/_m0Mk65I
@@GooliAth Thank you for replying back so fast. I used Global Sources to obtain quotes, and I found the prices were cheaper than Aliexpress. It took some time to filter through all the quotes and review pictures, dimensions, etc and find some that were capable of being flat mounted, with some cut-outs in the wall. The one I ended up getting a sample of, seemed very close to yours.. same proc (RK3288), mem, camera, etc. all for $300. plus shipping. Still testing it as it just arrived yesterday. You can tell it was built strong, as it is quite heavy. I wanted the same look.. something that looked almost like a picture with very low profile... which is more of a challenge to find.
This is the sample I ordered to try out:
redhat.systems/touchscreen1/specs.png
redhat.systems/touchscreen1/touch_1.jpg
redhat.systems/touchscreen1/touch_2.jpg
Note, the specs page shows a completely flat back, but, when manufactured they used a slightly different case that causes it to not sit as flat. The touch_1 and 2 show "as built" images.
Is this a monitor or screen with built in android OS?
What outdoor cameras do you use?
I use Dahua poe cameras connected to a Dahua NVR.
@@GooliAth how do you connect a Dahua NVR. Please help me!!! I do not know how to do. :(
@@rossellacarmisano8280 I use ffmpeg integration. my code for each camera looks like this: camera 5:
- platform: ffmpeg
name: "Garage"
input: rtsp://NVR-USERNAME:NVR-PASSWORD@NVR-IP-ADRESS/cam/realmonitor?channel=5&subtype=1
Copy the code and use your own username, password and ip adress. Choose what nvr channel. Paste it in the config.yaml
@@GooliAth thankss
I've just taken delivery of a couple of these beauties for a new renovation. I've gone down the same route as you with Dakboard and Home assistant. How did you set it up to require a touch on the screen to go back to the home assistant screen? I have the Dakboard set as the screensaver and lovelace as the start url but as soon as the camera detects me it goes straight to the start url.
Also, did you cut a hole in the wall to fit it so flush?
Figured it out. For anyone else who follows suit.. it's under settings>motion detection.. need to switch 'Exit Screensaver on Motion' off.
What screen model do you have?
@@philbios I went for the 21.5 inch, RK3399 android 9.0 4G 32G with PoE. 1080
@@mattcollins9870 hey Matt! Thank you for this hot information. Where did you buy the screen? :-)
@@mattcollins9870where did you purchase from? Do you have a model no?
For residential automation knx/Crestron....?
Hur har du fått till montaget så nära inpå väggen?
From your experience is it worth it to buy the same screen ..? Did you get any issues with it??
Hej Patrik, har du byggt den?
Please tell me more.
I'm wondering if I should make a new video with a little more detailed information about the installation. there are many who ask and are curious about how I did it.
That would be awesome. The screen looks so smart. I’m extending my kitchen and this looks like something I’d have in there 👍
Yes please!
Very, very nice! Are you running fully kiosk with Dakboard as the screensaver?
Thanks! Yes, that is correct. I have done a few upgrades and changes since i posted this video. I will try to make a new video with a bit more info as soon as I can.
@@GooliAth That would be great. Looking forward to it.
@@GooliAth Still waiting :)
@ I'm still waiting too :)I'm also trying to rebuild it with hacs "wallpanel" and in dakboard using private url but so far without success
How much and where can I buy this
Nice Job, is this the iiyama PROLITE TF2415MC-B1 touchscreen?
On which device is the android os running?
I bought a pair of monitors like this through a friend in Germany.
The screen is used to run Kiosk in shops etc. The only thing on the display is the spec, unfortunately no name.
Android is running on the monitor. It has a built in Rockchip. So it's like a big android tablet.
Here is the spec of the monitor:
* 24 ″ Interactive Digital Signage
* Quad-core Cortex-A17 1.8GHz, RockChip RK3288
* Ethernet RJ45, Wi-Fi 802.11 b / g / n.Bluetooth 4.0,4G
* DC In, HDMI Output, 3.5mm Audio Jack, Micro USB OTG, USB 2.0 host, RJ45, POE, SD Card Slot, Microphone
* Android 8.1 / 9.0
@@GooliAth nice, thanks for the Info!
@@GooliAth it’s possible to ask the German friend if he knows where to buy one of these? I’m from Austria, not far away ^^
Can’t find anything near close as this model
Guys i think he paid someone to install it that’s why he’s not explaining it
What do you need explained? I bought a Android touchscreen, mounted it on the wall. Not that hard to do 😊
I then installed Fully kiosk browser on the android touchscreen. Home assistant lovelace via nebu casa and dakboard as screensaver. 😊
@@GooliAththanks for sharing, I been wanting to do this for so long.
can u give us a link to this touch screen? i'm looking for something similar. @@GooliAth
When I open the page with the cameras, the page always reloads everything. how did you get the camera to appear immediately?
How are you running the dakboard as a screensaver?
fully kiosk, set dakboard url as screensaver.
Donde lo compraste o lo fabricante? Quiero hacer algo de esto pero para una ventana
would love that how to video.
Android os esta instalado no raspiberry?
Var köpte du skärmen?
hello it's great do you have a link for the screen and a tutorial to do the programming? thank you
What is this for a Monitor?
Awsome, what monitor did you use 👍
I bought a pair of monitors like this through a friend in Germany.
The screen is used to run Kiosk in shops etc. The only thing on the display is the spec, unfortunately no name.
Android is running on the monitor. It has a built in Rockchip. So it's like a big android tablet.
Here is the spec of the monitor:
* 24 ″ Interactive Digital Signage
* Quad-core Cortex-A17 1.8GHz, RockChip RK3288
* Ethernet RJ45, Wi-Fi 802.11 b / g / n.Bluetooth 4.0,4G
* DC In, HDMI Output, 3.5mm Audio Jack, Micro USB OTG, USB 2.0 host, RJ45, POE, SD Card Slot, Microphone
* Android 8.1 / 9.0
@@GooliAth Did you use Something like this?
www.amazon.com/Wisepoch-Screen-Android-1920x1080-Bluetooth/dp/B07T6Z4XPH
@@klanecko Yes, thats the one👍🏻
@@GooliAth So the screen is +400€ ?
@@GooliAth So, which one is it? Still doesn't say?
What operating system and what program is it running on?
Brilliant. What is this screen? What model is it ?
looks like a Beetronics 24ts7m
@@tonysanderson7741 The beetronics I don't think runs android.
@@MicheIIePucca you could run home assistant from a Pi in a kiosk browser then channel the output to the screen, possibly what the person did here.?
Model please?
Please Please please make a video. I want to do that! Pretty please 🙏
Is the os running on this?
Que modelo es el panel táctil?
Where can I buy this monitor?
❤😂🎉❤😂🎉❤😂🎉
How did u mount the display ?
What is the brand please?
Where does one buy this
Nice. How did you remove the sidebar access to the intergrations, hacs, etc?
Go to ur account settings at the bottom left. Scroll and u will see hide sidebar
can't believe you paid $2000 for that lol
Haha who said that i paid $2000? More like $200-300…
@@GooliAth Wich brand ? DIY ? Please help us ^^
How it's possible to do it: touch and show some other page? That feature is in Dakboard? I can not find it.
Download Fully Kiosk browser on your tablet. There you can set start url, screensaver and much much more.
@@GooliAth I wonder if I can do it on r.pi and Chrome + DAKBoard in Kiosk mode?
@@GooliAth ok. You set DAKBoard like your start URL. How you add touch iFrame or frame to switch to other tap or url?
@@Krucza no, i set Home assistant Nabu Casa link as start url and dakboard as screensaver. Screensaver is a fully kiosk plus feature I think.
How?
Amazing setup. What brand and model is the screen?
I want to know too
I bought a pair of monitors like this through a friend in Germany.
The screen is used to run Kiosk in shops etc. The only thing on the display is the spec, unfortunately no name.
Android is running on the monitor. It has a built in Rockchip. So it's like a big android tablet.
Here is the spec of the monitor:
* 24 ″ Interactive Digital Signage
* Quad-core Cortex-A17 1.8GHz, RockChip RK3288
* Ethernet RJ45, Wi-Fi 802.11 b / g / n.Bluetooth 4.0,4G
* DC In, HDMI Output, 3.5mm Audio Jack, Micro USB OTG, USB 2.0 host, RJ45, POE, SD Card Slot, Microphone
* Android 8.1 / 9.0
@@GooliAth thank you for telling. I found similar ones on Alibaba website. They go for around 200-400usd.
@@fdksdk4843 can you please share the alibaba link?
@@praveenkumarsaragadam7328 m.alibaba.com/amp/product/62208040931.html
Vilket OS ligger i botten?
Det är Android 8.1.
@@GooliAth Tack, vad heter skärmen du har kört på ?
Hello, would it be possible to send your shopping list ?
You mean the lovelace card? Or the actual groceries on my shopping list😉
Monitor name plz?
lot of unused space...
@@davidbeiler6364 this was just when I first tested the setup. It is now filled to the rim 😅
What screensaver are this?
I use Dakboard👍🏻
@@GooliAth Thanks!
And the display is always on ?
No, fully kiosk browser allows you to set times when the display is on and when it should sleep. If the screen is sleeping you simply just double tap it to wake it back up.
@@GooliAth ok thx for your answer it is a good thing but I think I would prefer an automatic on/off on presence like on a tablet
@@philou1516 yes that is also possible. The display has a built in camera that can be used to wake the screen back up again if it detects motion. 👍🏻
Are we
That's it? Just some mini-preview? C'mon man, where's the how-to video? I just bought a Raspberry Pi 4. Please???
Stolen from the local tacobell lol
99.9% of home automation is for geeks who just want a reason to put a huge monitor on the wall. In the end, this eats up far more electricity when a simple light switch is more than sufficient.
Hey, is there any way to contact you? Would love to ask you a few questions about it.