Need a brief specification and grading of stone chips to be used in pile also, of course it must be in the IS2911, Thank you for your excellent lecture 👍
Great work, but we want some more things like - 1.how cutting length and socketing of pile is decided.2 how pile calculation is done in sand and clay for circular pile?
sir , Edge distance should be minimum d or 150mm? please clarify. also please help me how will we decide on the basis of soil report and n values and sbc values and ground water table, what type of foundation is required. if it is pile, what length to give?
Pile length should be sufficient enough to carry the vertical pile capacity and reinforcement of the pile should be evaluated on the basis of Lateral Load on the Pile.
Sir , These are the details for a protection wall along river bank Existing ground level - 12.600 River bed level - 7.130 Ground water table located at - 3.00mts below ground level What should be the pile cut off level ..?
Need a brief specification and grading of stone chips to be used in pile also, of course it must be in the IS2911,
Thank you for your excellent lecture 👍
Great work, but we want some more things like - 1.how cutting length and socketing of pile is decided.2 how pile calculation is done in sand and clay for circular pile?
What is the tolerance allowed for
1. ROW to ROW pitch distance
2. Vertical distance
3. Clear cover
Excellent explanation.. Thank u so much. Keep up the good work..
How design single pile with cap
How to find depth of pile....?
What is the load bearing capacity of 1 fit dia pile the depth of file is 12 feet
Very good narration what us rhe specification of pile load test
Is it necessary to conduct static and dynamic load test for pile load test
Best explanation of pile foundation
What ia the settelment criteria for Pile foundation
What is the criteria for pile liners design
if uplift is present what shall we do?
❤Excellent Sir
Why permanent liners are used for bored cast in situ pile foundation.. What are criteria for that? Mainly water and soil?
permanent liner are provided where u have to excavate the pile for certain depth and for smooth finish
When total soil is loose or soft condition in such case Permanent liners used and liner thickness should be min 6 mm
sir , Edge distance should be minimum d or 150mm? please clarify. also please help me how will we decide on the basis of soil report and n values and sbc values and ground water table, what type of foundation is required. if it is pile, what length to give?
Pile length should be sufficient enough to carry the vertical pile capacity and reinforcement of the pile should be evaluated on the basis of Lateral Load on the Pile.
Sir ,
These are the details for a protection wall along river bank
Existing ground level - 12.600
River bed level - 7.130
Ground water table located at - 3.00mts below ground level
What should be the pile cut off level ..?
Superb... please also explain same about pile load test , routine load and Initial load
Good Job. Nicely explained
I'm doing pile foundation in kolkata metro right now
Thank you 😊
Sir also upload pile cap design
very use full thank you.
Lovely video
Thank you sir
Nice