8 Big Mistakes in Wall Plastering | प्लास्टर में क्रैक आने से कैसे बचें? 8 गलती प्लास्टर करने के समय

Поділитися
Вставка
  • Опубліковано 4 кві 2020
  • प्लास्टर में क्रैक आने से कैसे बचें
    just do these think and prevent it
    *Contact Details:-
    Twitter: / erdeepak4kumar5
    Facebook page: / er3deepak4kumar5
    Instagram: / er.deepak4kumar5
    *Join my Channel Membership
    / @civilengineerdeepakkumar
    #MistakeWallPlastering #AvoidCrack #CivilEngineering

КОМЕНТАРІ • 706

  • @pushpendrabhai9499
    @pushpendrabhai9499 2 роки тому +11

    Thanks

  • @usercap4061
    @usercap4061 4 роки тому +65

    Dear Mr. Deepak Kumar
    I am a retired Executive Engineer. I have seen many of your videos. You are covering practical issues which are mostly not discussed in the class .Your practical knowledge is awesome. Your videos will prove to be very useful to the young Engineers who just join any site .Just keep it up. As a retired Executive Engineer I admire your devotion to practical knowledge of Civil Engineering. You are doing an excellent job by making such videos on Civil Engineering. God bless you young man and young Engineer.
    Adv. Vishnu Bhope
    Retired Executive Engineer
    Aurangabad Maharashtra
    Dt. 13 - 4 - 2020

    • @CivilEngineerDeepakKumar
      @CivilEngineerDeepakKumar  4 роки тому +3

      thank you Sir

    • @chundawatramsinghchundawat1508
      @chundawatramsinghchundawat1508 4 роки тому +2

      Right sir

    • @bijayanandasatpathy4873
      @bijayanandasatpathy4873 4 роки тому +2

      Salute u Sir

    • @mohammedaadil5165
      @mohammedaadil5165 4 роки тому +2

      Thank you sir 👍 for inspiring him

    • @terenaam909
      @terenaam909 4 роки тому

      @@CivilEngineerDeepakKumar सर मकान का नींव का काम हो गया है, अब जमीन में मिट्टी भर के ग्राउंड लेवल ऊपर करना है, मिट्टी मिल नहीं रही, सफेद बालु भर दें तो क्या कोई हानि-लाभ है?
      आपका परामर्श शिरोधार्य है सर जी,
      कृपया मार्गदर्शन करें। 🙏🙏🙏🙏🙏

  • @narendrachoudhary80
    @narendrachoudhary80 4 роки тому +16

    Aapke vedio ko dekhkar mm contractor ki raill bna deta hu... Wo bhi surprise feel krta h ki isko itnaa knowledge kha se le aata h.. Thanku deepak sir for ur deep & practical knowledge📚

  • @arvindmehta4859
    @arvindmehta4859 3 роки тому +2

    सुझाव सराहनीय है।आपके इस सहयोग से हमलोग अच्छी जानकारी प्राप्त कर रहे हैं

  • @ramkumarbaiga3986
    @ramkumarbaiga3986 3 роки тому +2

    बहुत अच्छा लगा सर आपने इतना अच्छे से बताया कि भविष्य में जब भी घर बनायेंगे हम तो विशेष ध्यान देंगे। धन्यवाद

  • @Rajendrasingh-ip7fk
    @Rajendrasingh-ip7fk 2 роки тому +2

    आपका समझाने का तरीका बहुत ही बेहतरीन है सर

  • @nikhilkumarjha9313
    @nikhilkumarjha9313 3 роки тому +2

    समझने का आपका तरीका लाजाबाब है,सर

  • @AnmolSingh-ek7lz
    @AnmolSingh-ek7lz 4 роки тому +5

    Ye samjhane ka tarika bahut achha laga step by step 👌🔥
    follow all step by step all people

    • @shaikmadina8758
      @shaikmadina8758 4 роки тому

      Sir,brickwork ke bad directly tile fix karey to kyesa rahega

  • @rajindersingh-lc9jt
    @rajindersingh-lc9jt 4 роки тому +12

    Ur every vedio is very important for we all. Nowdays I m doing Interview preparation and this knowledgeful video play a big role for me and my carrier I m very highly thankful to u sir god bless u and make healthy wealthy

    • @CivilEngineerDeepakKumar
      @CivilEngineerDeepakKumar  4 роки тому

      welcome

    • @terenaam909
      @terenaam909 4 роки тому

      @@CivilEngineerDeepakKumar सर मकान का नींव का काम हो गया है, अब जमीन में मिट्टी भर के ग्राउंड लेवल ऊपर करना है, मिट्टी मिल नहीं रही, सफेद बालु भर दें तो क्या कोई हानि-लाभ है?
      आपका परामर्श शिरोधार्य है सर जी,
      कृपया मार्गदर्शन करें। 🙏🙏🙏🙏🙏

  • @vitthaljadhav7820
    @vitthaljadhav7820 4 роки тому +22

    घर मालीक को इसकै बारे में कुछ भी मालूम नहीं होता है, इंजीनियर साहब आपने बहुत अच्छी तरह से समझा दिया! लाख लाख धन्यवाद!

  • @mamtanagar1939
    @mamtanagar1939 3 роки тому +2

    Thank you so much sir, ye information mere bahut kaam ki h. Contractor aur mistri bahut pagal banate h motor mixing n curing ko lekar. Apki bahut si video dekhi h maine, sabhi helpful h. Thanks again.

  • @chandali4743
    @chandali4743 4 роки тому +2

    Apke samjhane ka tarika kafi achchha hai.

  • @anildas888
    @anildas888 2 роки тому +2

    Very useful video. Thanks!

  • @venterprises4184
    @venterprises4184 4 роки тому +5

    दिपकजी साधी सरळ भाषा मे बहोत अच्छा इन्फॉर्मेशन दिया आपने... 👌🏻👍🏻
    एक सवाल था,
    क्या प्लास्टर करते वक्त मौसम का कोई असर पडता हे? आऊटर प्लास्टर और inter प्लास्टर पे?
    और कब कब कोणसा ग्रेड का सिमेंट युज होना चाहीये? जैसे बांधकाम, RCC या प्लास्टर मे…?
    मतलब सिमेंट ग्रेड क्या असर करता हे?

  • @sasankasekharsamanta2604
    @sasankasekharsamanta2604 4 роки тому +1

    Excellent contribute for a general person.Thank you very much.

  • @jayantaspical1586
    @jayantaspical1586 Місяць тому

    Sir bhaut dadya video tha. Knowledge mela.

  • @pramjeetkumar5803
    @pramjeetkumar5803 2 роки тому +3

    Great knowledge thank you very much sir ji

  • @ashokkumarkoli8535
    @ashokkumarkoli8535 4 роки тому +4

    ये बात दीपक जी,, सबसे अच्छा और फायदेमंद वीडियो

  • @orpheusadam3309
    @orpheusadam3309 4 роки тому

    Excellent, bahot hi important baatein jo Logon ko nahi maaloom , very good job brother

  • @amitakiwate8485
    @amitakiwate8485 2 роки тому +1

    Bahot badhiya

  • @arjunkumar0514
    @arjunkumar0514 4 роки тому +4

    Sir aap bohot honest suggestions dete h
    THANK YOU

  • @DYNAMICFREEFIREKILLER
    @DYNAMICFREEFIREKILLER 2 роки тому +2

    Thank you sir for your precious information

  • @shaukatullaansari7562
    @shaukatullaansari7562 3 роки тому +1

    Deepak Sir. Thanks for giving perfect n very useful suggestions. You are best adviser thanks again.

  • @moazzazali795
    @moazzazali795 2 роки тому +1

    Bahut khoob aapne details me btaya .to much good

  • @ullipayalasubbarayudu
    @ullipayalasubbarayudu 4 роки тому +2

    Sir! Good video! Keep it up! Thank you for your service!

  • @SunilDonglepatil
    @SunilDonglepatil 3 роки тому +1

    Very Easy to understand Your Language For Very Important work of Constriction Good Sir..Good Job..God bless you

  • @rupeshshaw6452
    @rupeshshaw6452 2 роки тому +1

    Bhut mast btate h aap

  • @arya4280
    @arya4280 3 роки тому +2

    thank you...for sharing your practical knowledge with us

  • @pariks0117
    @pariks0117 Рік тому +2

    sir you are just awesome 👍

  • @ashipal4694
    @ashipal4694 4 роки тому +2

    U make the supervision very easy for non-tech person. Now No contractor can ripe Your subscribers off ..Thanks a ton.

  • @Manojyadav-td2cc
    @Manojyadav-td2cc Рік тому +2

    Thank you so much sir for guidance after 2 years I see the video of plaster now I am on site here is plastering work going on। After seeing this video i gain extra knowledge

  • @sachidanandpanjara
    @sachidanandpanjara 4 роки тому +1

    App se pura sehmat hu bhaiya 🙏

  • @RahulYadav-ot9mz
    @RahulYadav-ot9mz 4 роки тому +1

    Bhaiya Bahut badiya information diye hai apaka bahut dhanyawad hamare ghar me plastering karana hai ab hum in sab bato ka khud dyan rakhenge.

  • @tiwarianant92
    @tiwarianant92 Рік тому +1

    jabardast video tx airg

  • @deshmitter5717
    @deshmitter5717 4 роки тому +5

    Thank you sir for providing detailed imformation for cement plastering. Though I felt that there should have some more detail for preparing mortar in homogeniously and also in right texture so that it may not buldge afterwards

  • @premdan6027
    @premdan6027 2 роки тому +1

    बहुत अच्छी बात बताई है आपको धन्यवाद

  • @kanchanrajravi8371
    @kanchanrajravi8371 3 роки тому +1

    बहुत ही बेहतरीन बातें

  • @arshadmd8026
    @arshadmd8026 2 роки тому +1

    Bilkul correct hai sabhi baat

  • @aryasunil849
    @aryasunil849 3 роки тому

    बहुत बहुत शुक्रिया सर जी बहुत ही अच्छा ज्ञान दिया और जो जो प्वाइंट अपने बताया वो सब मैंने झेला है बाउंड्री में प्लास्टर करवाते समय चाहे labour करे या मिस्त्री दोनों गलती कर देते थे पर अभी पूरा घर का प्लास्टर बाकी है वो मै बिल्कुल सटीक तरह से करवाना है जैसे आप ने बताया मै आपको 8 महीने से फॉलो और आपका वीडियो देख रहा हूं और आपका सबसे last line बहुत ही मस्त और सुनने में आनंद आता है चैनलवा तो सब्सक्राइब कर दो

  • @tvkedeevane9332
    @tvkedeevane9332 Рік тому

    Bahut hi achcha jankari hai

  • @kamleshwarsingh9531
    @kamleshwarsingh9531 Рік тому

    Bahut Achcha sujhav aapane Diya dhanyvad

  • @ashwininarvekar1105
    @ashwininarvekar1105 3 роки тому +1

    बहोत सही माहिती सूंदर vidio

  • @dhaneswarmoharana5873
    @dhaneswarmoharana5873 4 роки тому

    Thank you for valuable tips

  • @spatil6582
    @spatil6582 4 роки тому +1

    Thanks sir maine sara kam aapne bataya vaisa hi kia...

  • @karamatali2460
    @karamatali2460 3 роки тому +1

    Sir aap ne bilkul sehi information thi hai Aisa hi karte hai 100 % sehi hai

  • @ramjanmyadav5488
    @ramjanmyadav5488 4 роки тому +1

    Good under standing and good knowledge .
    Thanks

  • @shrutim8237
    @shrutim8237 3 роки тому +1

    Very nice and useful information sir🙏..Thanks a lot🙏🙏

  • @musiclover1446
    @musiclover1446 4 роки тому +2

    U r best teacher sir

  • @rajeshprajpati4393
    @rajeshprajpati4393 Рік тому

    सर प्लास्टर के बारे में बहुत बढ़िया बताएं और अच्छा अच्छा बता दीजिए क्या क्या कभी होती है

  • @Aarti-923
    @Aarti-923 4 роки тому +1

    Very important information thanks dear - watching from Bangladesh....

  • @vikashkumarmahto4866
    @vikashkumarmahto4866 4 роки тому +1

    Bahut Accha information hai.

  • @ROBBYGAMERZ
    @ROBBYGAMERZ 2 місяці тому

    bahut sundar sir

  • @rajudaniel7344
    @rajudaniel7344 4 роки тому +1

    Aap ne bahut acche tarike see bataya thanks

  • @Vivekkumar-ld7wi
    @Vivekkumar-ld7wi 3 роки тому +1

    Mathura kurweti achha jankari dene ke lei thank you

  • @arungurung1189
    @arungurung1189 4 роки тому +1

    Thank-you sir curing k bare mein bataneke k liye

  • @panadapanada9698
    @panadapanada9698 4 роки тому +1

    Thank you my brothers this information

  • @amjadfarooq8063
    @amjadfarooq8063 4 роки тому +4

    Excellent video. The problem is as the owner as soon as you turn your back everyone cheats. No proper mixing no care, no attention to detail.

    • @sushiltripathi1535
      @sushiltripathi1535 3 роки тому

      Plastar hone kitne bad pani dena hai

    • @amjadfarooq8063
      @amjadfarooq8063 3 роки тому

      @@sushiltripathi1535 generally 24 hrs however if exposed to the heat during summer months, then do not allow it to dry too quickly

  • @vishalkamboj78
    @vishalkamboj78 4 роки тому +7

    अगर ब्रिक्स के ऊपर एफलोरसेन्स (सफेद बुरा ) दिखाइ दे तो उस जगह से प्लास्टर को निकाल ले और ब्रूस के द्वारा उस दीवार की अच्छी तरह से सफाई कर उसके बाद उसके ऊपर छान कर इमली का गोल अप्लाई करे फर्स्ट कोट ओर सेकण्ड कोट के बीच कम से कम पाँच घंटे का अन्तर हो उसके अगले दिन उसके ऊपर सीमेंट गोल अप्लाई करे उसके बाद प्लास्टर करे .इमली जो है नमक को न्यूट्रल कर देती है

  • @prakashkawale5673
    @prakashkawale5673 4 роки тому +1

    Bahot badhiya bataya bhai.

  • @gopalyeole4420
    @gopalyeole4420 2 роки тому

    Thank you Sir. Itni saari baate hame bilkul malum nahi thi.aapka bahut bahut dhanyawad.🙏🙏👍

  • @shashikantchavan4869
    @shashikantchavan4869 3 роки тому +1

    Sirji, very deep knowledge, excellent, and
    Essential.

  • @gayanandsharma4462
    @gayanandsharma4462 3 роки тому +3

    Well done, Deepak sir.

  • @KrishnaKumar-qk2qi
    @KrishnaKumar-qk2qi 4 роки тому +1

    Bahot badhiyan bade bhai👍

  • @ArvindSingh-mk5xb
    @ArvindSingh-mk5xb Рік тому +1

    Very useful video

  • @jahirislam6035
    @jahirislam6035 3 роки тому +3

    Thank you so much for uploading this type of vedio.if we use 1:4 internal and external and ceiling is it better?Please explain/tell

  • @khushi_hasan_vlogs1176
    @khushi_hasan_vlogs1176 Рік тому +1

    Very good info sir thanks

  • @buddha2845
    @buddha2845 3 роки тому

    बहुत ही उपयोगी जानकारी

  • @kundanpaswan9237
    @kundanpaswan9237 4 роки тому +2

    Thanksgiving u.

  • @vijaychaudhary6102
    @vijaychaudhary6102 4 роки тому +1

    Thanks for your valuable and appropriate suggestions.

  • @jaswantsingh-vu6nq
    @jaswantsingh-vu6nq Рік тому +1

    Thank you for providing such important information

  • @nirdoshkumarsingh8326
    @nirdoshkumarsingh8326 2 роки тому +1

    sir ,,,,kya bat hai ,😛🙏

  • @billubawarchi
    @billubawarchi 4 роки тому

    Thanks Deepak ji

  • @er_shubham_ragad3303
    @er_shubham_ragad3303 4 роки тому +3

    Sir sabse bdi baat to ye hai ki kya nahi krna hai, ye bate koi nhi batata. Thanks sir

  • @roshandharwal3633
    @roshandharwal3633 2 роки тому +2

    Thank you so much Beautiful line sriJi 🙏🙏🙏🙏🙏

  • @rajneeshsharma2363
    @rajneeshsharma2363 3 роки тому +3

    Sir , seiling ya coulumn ya beam ki shuttering agar ply board se karte hae to surface bahot finish aata hae. To kya ispe bina plaster kiye putty kar sakte hae...
    Pls help I want ur assistance because I m constructing my house

  • @Rahul-ij7uk
    @Rahul-ij7uk 4 роки тому +1

    Awesome bhai🙌🙌

  • @shravanshetty7982
    @shravanshetty7982 4 роки тому +5

    HI Er. Deepak thank you so much for the videos as an Architect myself i use your videos to help me in civil engineering. without it it would be very hard for me to explain on site

  • @adityamohanta14
    @adityamohanta14 4 роки тому +2

    Beautiful explanation...
    Thank you Sir...

  • @arunkumardass.oshyamsundar7981
    @arunkumardass.oshyamsundar7981 3 роки тому

    Bhut shundar

  • @pastorjohn5010
    @pastorjohn5010 3 роки тому

    Thank you sir. Learn a lot

  • @pabitrhalder6741
    @pabitrhalder6741 4 роки тому +1

    Bohut khub. Help full video.

  • @manaskumarbaskey5891
    @manaskumarbaskey5891 4 роки тому

    Very important information. Thank you

  • @vickyy2091
    @vickyy2091 2 роки тому

    Sir aap mahan ho🙏🙏🙏

  • @lokeshchandel007
    @lokeshchandel007 4 роки тому +1

    bahut hi saral bhasha mein samjhatein hain aap

  • @bhutamandi3549
    @bhutamandi3549 4 роки тому +1

    Very good sir

  • @balasubramaniumvellaichamy446
    @balasubramaniumvellaichamy446 4 роки тому +1

    Good. Keep it up Deepak !

  • @mdfarzduqealizoq7246
    @mdfarzduqealizoq7246 2 роки тому

    Deepak ji 🙏 namshkar my mother is your big follower. Wo Pura ghar apke video dekhkar banwati hai.

  • @mohitchatterjee886
    @mohitchatterjee886 4 роки тому +4

    Sir,
    I always follow your videos.sir, can I plaster foundation walls(four sides) below ground with mortar to make the base water resistant.some one suggested to plaster the area with stone chips . will you suggest whichone is better.Thank you

  • @rahultarole436
    @rahultarole436 2 роки тому

    Thanks for valuable information.

  • @srinukorutla9724
    @srinukorutla9724 4 роки тому +1

    Great explanation sir.... thank you

  • @dharmpaldongre4972
    @dharmpaldongre4972 Рік тому +1

    Thank you so much sir

  • @bhagvanomanjhi
    @bhagvanomanjhi 4 роки тому

    Wow
    Jankari ek number LGA !

  • @dhebesachin8749
    @dhebesachin8749 4 роки тому

    Bhaut aach jankari diya hai sir apne bhaut bhaut danyavad

  • @Aditya-mu2fz
    @Aditya-mu2fz 4 роки тому

    Sir please aisi video banate rahiye , bohot kuch sikhne milega hum freshers ko

  • @dibakaracharya5821
    @dibakaracharya5821 3 роки тому +1

    Thanks deepak

  • @RaviSingh-cu5hg
    @RaviSingh-cu5hg 4 роки тому +1

    Good tips Mr. Deepak

  • @Rajur5223
    @Rajur5223 3 роки тому +1

    Bhaut sahi

  • @tinkukumar1869
    @tinkukumar1869 Місяць тому

    It's most helpful video sir Thanks sir ❤

  • @balakrishnadash8131
    @balakrishnadash8131 4 роки тому

    Thank you sir 🙏🌷

  • @sagarkudan8756
    @sagarkudan8756 3 роки тому +1

    Very nice videos