Quick repair water tank gasket of Nescafe / Krups espresso machines
Вставка
- Опубліковано 26 жов 2019
- Hello guys and welcome once again to a new video. When I was fixing my espresso machine is found this solution that I wanted to share it with you. I really hope this one helps you ...if yes give it a thumbs up and subscribe. Take care!
Thanks a million Adrian !!!
Just a short length of wire and it totally fixed the water leakage issue of my Piccolo.
You are truly a legend.
Thanks Ken!
Thanks for sharing a simple fix for this annoying problem. I’m still looking for the right gasket online but your trick worked like a charm. Thanks man!
Thx a lot, your little hack fixed the leak! Did not use a wire but a plastic-coated thread which comes with new cables!
Many thanks Adrian (helped me repair my Delonghi coffee machine with a water leak) :)
@Adrian you're legend. Just did it and it fixed the problem!
Thank you so much.
Regards from Setúbal, Portugal.
Excellent Adrian, very good idea, followed your instructions and it works like a charm. Thank you so much!! Greetings from Athens/Greece
Glad it helped. But be aware that this is a quick fix that may last a lifetime or a month. Try searching for a new gasket. ;)
Genius idea, thank you!
I'll try and see if it works.
Good idea. I used teflon tape on the outside of the water tank stub. So I've been using it for a while, it doesn't leak. 🙂
Good idea also!
That's a really good idea that I might have to steal. Thank you.
very good idea. it worked
Can you please share a picture of where exactly you put the Teflon tape? Thanks a lot!
This worked beautifully. I did a single wrap around the nipple on the water tank.
Tried just now .. and it really works .. there's no more leakage on my dulce gusto
This video just saved my coffee machine
Omg, u r genesis!! Thank you so much
Good fix will keep it in memory
Amazing stuff! Very smart way. I will fix mine now :)
Good idea, or you could use a correct sized iring inside the seal to pack it out.
You didn't mention the screws and plastic clips to access the seal though 😩 That's the hard part, getting it apart without breaking these, cheers from Australia
Thank you for idea! i have this problem!
It works. Thanks!
We had the same problem with the Nespresso essenza, and used a strip of rubber band inside the gasket to expand it and create a better seal. It's working so far :)
Yes I did try the same as well and cut a piece of rubber band and out it around and it works wonderfully. Thanks for the tips. Not easy to find a wire.
Thanks for tip, must try this
Did it work?
Thanks Adrian :)
Thank you very much
I put a lick of wood glue in the recess of the washer then let it dry. That was enough to displace the washer up, into abutment with the housing, which slightly reduces the inner diameter, to grip the spigot on the water tank... no leak.
Thank you very Mutch sir
Welcome!
Help please Adrian, how or what do I disassemble to get to the o ring please? Do I remove the outer shell cover and if so, how to do this please? Thank you. This is a Nescafe Alegria.
Work it 👍
Si ma come si apre per accedere alla guarnizione
Fuck me mate 😂 i owe u $100 or so 🙄🤣
U just saved that much money for me, to not buying a new coffee machine 🙏🏻 i was playing with mine almost a year now😡 u cant imagine how many sleepless night caused by this f*ckin water leakage 🙄🤣 first time i saw this video i thought its bullshit 🤣 cant fix this problem whit a bloody wire 🙄
Bt it truly worked 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
U are a fuckin legend mate 🙏🏻💪🏻 thanks for your video 😉
How many months or year and you got this problem, because I already bought a dolce gusto and from the first cup start leaking
Hi. From my experience I saw that also new units have this problem. This is because the gasket is made from a soft rubber material and even if it stays in storage for a long time it may lose his sealing properties.
How do you place the gasket in? With groove facing up or down? I took mine out and now I can't remember which way it goes.
With the groove down. The role of the groove is to push against the walls of the plastic drain and against the water tank intake and make a perfect seal. Therefore groove down.
@@benassy69 Thanks!!!
Hi, thanks for sharing. Where did you order the gasket from?
Hello. You can find a bunch on ebay. Just search for" Water tank gasket Dolce Gusto"
What's the reference for the new gasket? Thanks for time!
great
Hola Adrián, tengo una falla en la máquina y no se que hacer. Tengo días con una mini me, funcionaba bien pero ahora que preparo café solo lo hace al mínimo, es decir, le pongo el sensor para un café de 6 líneas, trabaja y se regresa la palanca al centro, como si le hubiera puesto solo una línea de café, ¿alguna sugerencia?
Hi there, hubby got this for Christmas gift, used it today and water pouring out then we discovered a tiny coiled spring popped out the part that the water tank clips into. Any ideas please.
That spring from the water tank should never get out. His role is to tension the gasket that seals the water inside the tank. Order a new water tank spring system or buy a new water tank.
В крепеже для бака воды лежит пружинка. Она для чистки иглы прокалывателя контейнера.
Any idea if this waterseal is universal? Wondering if i can put it on my genio s plus
It is usually the same in a loot of dolce gusto and nespreso machines.
I ordered and fitted a new one from Amazon but it still leaks. I'm wondering whether it's a bad seal or something else? I don't want to order another seal from elsewhere in case it still doesn't fix it.
If you fitted a new one this should resolve your problem. Look inside the unit maybe your leak is coming from elsewhere.
I was able to remove and replace the gasket on mine with just a pair of angled tweezers. I didn't need to unscrew anything.
Great job!
Thanks for information. My problem is the actual tank leaks so I presume the "O" ring inside the tank is the problem but I can't see how it can be replaced. Any suggestions?
I have a video on this topic. Of course it depends on the shape of the tank if it is an easy swap or not.
@@benassy69 Thanks for your reply Adrian. The leak in my water tank is due to the "O" ring inside the tank having perished not the gasket in the unit itself. I can now remove and replace the "O" ring - I just need to find a supplier for the correct size "O" ring
What kind of screw they use? The water leveler switch not working properly
It is a star screw I think is called a T10 bit. The switch problem might be due to a loose connection on the board. Easy fix.
Adrian B. It’s hard to set the water amount. One off the screw busted can’t unscrew it.
I lost the seal and I can not find to buy. How can I fix it with any other seal or any other method
Hey Adrian, my Nescafe Barista machine won't release the hot water, the indicator keeps blinking red. Any idea how to fix this?
Hi. Continuous red blinking means you have a fault on the main board. Could be a lot of components that have failed.
Buna ziua cu pompa de apa ati avut probleme ?
Depinde. Am întâlnit multe defecte ale pompei. Ce problema aveți dvs?
Salut. De unde ai reusit sa cumperi garnitura de etansare? Nu gasesc niciunde, desigur la un pret fair!
Merci
Buna ziua. Gasiti garnitura noua pe olx.
Un pret estimativ? Sau daca mai ai numele lui?
20 ron. Un tip in Brasov ...il cheama Daniel. "Garnitura rezervor apa expresor de cafea Dolce Gusto, Krups"
Am gasit. Merci mult!
@@benassy69 Si cand vroiam sa-i zic ca am eu, m-ai dat in vileag tu. :)
Adrian help please , Nescafe Alegria model A510 leaking water but I can't disassemble
Hello Jaco. I presume is the water tank seal / o-ring. Unfortunately you cannot change it without disassembling the machine.
How u open the inner part???
Dont knlw which inner part you are refering at.
ua-cam.com/video/k7od62bBRtM/v-deo.html
I need my coffee
We all do!
Where did you order gasket ?
You can find it everywhere. Amazon or other vendors.
where do you buy this gasget?
Amazon/ ebay/ aliexpress
can you provide the size of the gasket? thank you!
Do you alredy fixed??
16x22x5
Добрый день! У меня такая проблема. Купили кофеварку с рук, проверив что она хорошо работает и всё варит - забрали ее успешно. Но потом она всю ночь была в машине в минус 20) а уже утром отвезли не на работу, и уже на работе она перестала нагреваться и рычаг не включался, автоматически откатываясь на нейтралку. В итоге вообще потом снизу протекла вода. Мы не знаем что делать, может быть дело в том же, что и у вас на видео?😢
Buna, am avut si eu o pb cu pierderea apei, concomitent cu momentul cand se facea si cafeaua. Nu am dat atentie faptului ca apa era calda deci trecea prin aparat si am schimbat rezervorul. Bineinteles ca asta nu a rezolvat pb. Apa se scurge si pe sus pe undeva si in partea de jos si mult. Ma gandesc ca nu garnitura e pb. Ati avut asemenea situatii? Un sfat, altul decat sa iau alt aparat :)). Merci.
LE: scuze, am vazut ca mai aveti un clip pt garnitura de sus unde se elibereaza cafeaua...cred ca ma dumiresc acolo :)
Bună. Daca pierde apa pe sus atunci e de la acel diffuser plate. Se poate repara simplu cu o garnitura mica cum am procedat eu in video sau cumpărați un nou diffuser plate. Sunt ieftine. O zi buna!
@@benassy69 Da, merci. Am gasit intre timp si clipul ala cu diffuser plate sau cum i.o zice si in ro nu stiu. O sa mestresc ceva ca acolo. Stiu ca nu is scumpe dar parca la ambitie vreau sa il repar ca nu e decat un Picollo amarat in fond. Merci si faci treaba buna!
But how do I open it to get to this part?
I have a short video on my channel addressing exactly this.
Still working? by that way it's 8mm O-Ring
Machine switch on but did not work. Side switch turned green but nothing . Could be pump not it order. Thanks
I had 2 machines with similar faults. In one case it was that big box capacitor and it the other case was the FET that switches on the pump.
@@benassy69 thanks for your help The capacitor I know which is but where is the FET located . Another thing how can I check if capacitor is good or not . Thanks
Unsolder the cap and measure it. It has to be close to the value stated on the housing of the cap. The FET is located underneath the pin marked as PUMP.
Thanks for your time and help once again . Do I need to discharge the capacitor before testing it. Thanks
It is a small one by the time you test it, it should be discharged. But to be sure short the terminals with a screwdriver and then unsolder it. The value is somewhere between 470nF to 680 nF if I recall correctly.
Hi there where do you guys get the parts. The water lever switch not working properly. I called the company they said they don’t have. Don’t waste your money on this brand also Nespresso is the same company they don’t have the parts. Thank you
Nespresso and Nescafe are the coffee brand that sells this machines. The units are produced by DeLonghi and Krups. Contact them.
Adrian B. Thank you for the info so they will have the parts?
Too march pla pla pla
эКспрессо тебя спалило)
Fake it is due the water tank leeaking