That's not only sexy in design but the function and form is hands down awesome! A 95 Nissan Hardbody DIY guy , did my version of a 38-38 Weber outlaw carb mod/ install to help the Nissan D21 masses cause nobody did one up to date but your channel and products are mind blowing awesome !
My old roommate got me into mini trucking it's sure is fun, laying frame going down the road lol and hitting them switches is what it's all about. I like airbags better tho.
You think you could make an in depth walkthrough of the quest alternator swap you did? Ive seen the thread on Infamous Nissan and am very interested. Notice after installing fog lights my alternator just isn't cutting it anymore. TIA!
Ya I could do a video showing the details. I'm going to need to pull my engine out before summer, I think that would be a perfect time to film a video about it 🤙🏼
@@scrapingpavement I’ll keep an eye out and give you a view and like! Not sure if you’re on Facebook or not? Maybe we could get in contact on there as well?
@@scrapingpavement thanks! I’ve had a 4x4 D21 forever. Just picked up a 2WD and was looking into lowering it. Then of coarse a guy looks into bags after seeing all the cool rigs on the internet. Thanks for the info!
@@scrapingpavement do ineed to make a custom bracket to hold the coil overs or can I use the one included with the kit and if so what coilover do u recommend…. Thank you for the reply
Your welding is phenomenal!
Thank you
The innovation and development behind these parts and your products in general is really cool! ☝😎👍
Thanks buddy! Always striving for improvement, thanks for watching!
I’ll bet with very little modifications, this kit will work on a 720 Nissan. Nice work!
Ya probably wouldn't be too hard at all, thank you!
That's not only sexy in design but the function and form is hands down awesome! A 95 Nissan Hardbody DIY guy , did my version of a 38-38 Weber outlaw carb mod/ install to help the Nissan D21 masses cause nobody did one up to date but your channel and products are mind blowing awesome !
Thank you, I appreciate the kind words, that's awesome to hear! Thanks for watching and have a great day! keep on truckin'
That def was a clean and straight to the point how-to video. I loved it, thank you!
Thanks for the feed back, appreciate it!
I'm glad you came out with another kit. I was lost after you had stopped making the last one. Now I just have to order this one. Thank you a lot!!!!!!
Thanks for the support!
Great job on the kit! Killing it with all the parts for the hardbody and b series!
Thanks homie 🙏 💯👊🏼
Im looking for a kit for my 2002 nissan frontier not many options out there
Definitely keen on getting a pair of these myself for my Nav. I reckon this and your LCA plate perfect match.
Keep it up man. Videos like this help out the newer crowd a ton.
Thanks Rodney!
Looks like a really nice kit,good work man
Thanks dude, appreciate it 👊🏼👊🏼
Very cool kit. Love the stuff you come up with.
Thanks clint! I need to get caught up on your vids the s10 is going to be sick 🤘🏼
Great design and great video!
Thanks Benny 🤘🏼
Reminds me I need to inquire into a few parts next month.
My old roommate got me into mini trucking it's sure is fun, laying frame going down the road lol and hitting them switches is what it's all about. I like airbags better tho.
Air bags is the way to go🤘🏼🤘🏼
Looks great nice install guide!
Glad it was helpful!
You think you could make an in depth walkthrough of the quest alternator swap you did? Ive seen the thread on Infamous Nissan and am very interested. Notice after installing fog lights my alternator just isn't cutting it anymore. TIA!
Ya I could do a video showing the details. I'm going to need to pull my engine out before summer, I think that would be a perfect time to film a video about it 🤙🏼
@@scrapingpavement I’ll keep an eye out and give you a view and like! Not sure if you’re on Facebook or not? Maybe we could get in contact on there as well?
I’m just wondering why this is done? Is the stock TC rod bad for some reason? Does it hit the tie rod when super low?
Tension rod contacts the steering components when laying out a d21 causing binding and holding the truck up from going all the way down.
@@scrapingpavement thanks! I’ve had a 4x4 D21 forever. Just picked up a 2WD and was looking into lowering it. Then of coarse a guy looks into bags after seeing all the cool rigs on the internet. Thanks for the info!
Nice looking setup 👌
Thanks! 👍
Badass man keep it up brother
Very cool!
Nice kit brotha!
Thanks 🤙🏼
Keep it up! Amazing video!
Thanks Mathias!
I know this is an old video, will this work for a 1991 Isuzu space cab?
Can't say for sure as I have yet to test it on that truck. However I do have a universal kit with trim to fit tabs.
are you making these anymore? site says sold out. Curious what the lead time might be.
Waiting on a heim joint shipment, should be back in stock next week.
Nice work
Very nice!✌🏻
Wicked awesome!
Wow what a kick Azz vid and great product
Appreciate it!
What Shock do U use with this kit for bags?
I like to use an oem front replacement from any autoparts store.
Question do you sell a rear air suspension kit for s10.
I do not, check out thorbros.com
When do you think you will have the welded kit in stock?
Hopefully early February, just sold out of the first batch.
anything like this for a datsun 720??
Nothing specific yet, but I do also have a universal trim to fit kit.
Welding on the brackets looked prenominal!
Thank you 🤙🏼
Do u sell the lower arm all ready done
Not at this point
Could this work on a 1989 Toyota van wagon ?
This kit specifically probably not. I do have a universal kit as well that may..
@@scrapingpavement bet thanks bro looks so similar to the van trying to lay frame on her
Can you make a set of s10 upper an lower arms
Unfortunately don't have the time to do those.
What can u do about getting rid of the torsion bars
Coil overs, air bags, or hydraulics. I offer air bag brackets right now. I will be designing coil over brackets later this year.
@@scrapingpavement will the coil over bracket that your designing work with this kit?
@@ebanuelos8380 yep this will work with coil overs.
@scrapingpavement what type of coils can this kit be compatible with for as small of a coil you'd run
@@scrapingpavement do ineed to make a custom bracket to hold the coil overs or can I use the one included with the kit and if so what coilover do u recommend…. Thank you for the reply