That's just awesome. Nice job. Subscribed to your channel after seeing you use kaplin tape to hold a PCB down which is what I do. Just starting learning this level of repair and learning a lot watching you, Jessa, a few others and working on some of the skeleton boards I have somehow accumulated after 6 months in the phone business. I will likely be a customer soon!
Really awesome. I have two 6Plus with touch issues. wish I could find someone to fix it last guys messed me around. All the way in South Africa so yeah. Keep up the great work!
I noticed the lag when you where inspecting the pads, I thought it froze. If there is a lot of nasty stuff on the board, wouldn't it be better to re-clean the pads? I know you said they look good but....
Hi, I am really smart so I put a piece of tape on the touch ic chips hoping to temporarily fix the problem, only to have it not turn on at all. I checked for a short on vcc main and there is none. any advice on where to go from here?
Awesome video, I'm just setting out repairing phones got most of the stuff, but what flux do you use as I have been using kingbo and it doesn't seem to work as good as yours, kind regards.
Hello I would love to get some prices on your service .. .. I have a iPhone xs max and the connector on the motherboard where the screen connector is damage.. and I want to get a price Quote ... I fixed iPhones but iam not as Advanced as you .. Excellent video ... also I can send it in ... ...thanks
Hello sir I m almost all video seen ur video but I m asking one question please can u tell me iPhone 6s battery drain problem ..... And I m changing battery and display but issues is same please help me
Very impressive videos. I know I need software like ZXW or Z3X with .brd files and PDF. I am looking for a tutorial for a start to finish board diagnostic. I know there are countless possibilities of problems but at least somewhere to start. Do you know if those programs have info like that? Thanks
I've never seen anything with that info except for... I have seen some schematics that have diagnostic information in them. Many Samsung schematics will have some "check this, if it's not this check that then this..." flow charts that have helped me solve some Galaxy problems.
Hi, i have an iphone 6 plus. after replacing touch have no image but after 20 seconds image appears. now do that without touch ic, i checked sage, cumulus,chesnut, resistance in conector, voltajes, but still the same. can you help me?
They're $50 special ESD safe Q-Tips.... I'm kidding - I buy them for $1 per pack at the Dollar General Store in the cosmetics section. :D They've been out for weeks though so I'm going to need to order some.
You're welcome! Thanks for watching :) I use my temp set on 390C most of the time. I am using a very cheap hot air station: www.amazon.com/Aoyue-852A-Digital-Rework-Station/dp/B000HDDXY0/ref=sr_1_4?ie=UTF8&qid=1480427892&sr=8-4&keywords=aoyue+station
What board files are you using for the iPhones there? I'm working a lot of Openflex Boardview ( openboardview.org ) but I've not ever encountered an iPhone boardview file to test with it but it's definitely something I'd like to get working on it.
I'm using ZXW from www.zxwtools.com. I'm not sure where they get all of their information but it's pretty closed off. I have to plug in their USB license dongle to use it, then the board views are loaded from their servers as needed.
That explains things, as I know a lot of people have been hunting around for BRD type files for the iPhones (like the Macbooks/laptops), even if it meant writing another board format decoder in to it. Thanks for the reply.
Hello, I do not understand I tried to change the two components that handles the touch for iphone 6 more then at the start do not want to be thank you for help me please
anyway you could show which pads on these chips on NC. Im just practicing on a board i bought that was iCloud locked and i can't find this info anywhere of course my 1st try I pulled a ton of pads. Just wondering thanks for videos Ive watched it a couple of times. Good tips on practicing?? Boards are expensive and then I'm never sure if i did it right if i buy a dead board. thanks
Hi sir i had i phone 6 plus touch problem i made jumper thats ok but now phone stuck on 0.2amp on power supply taking voltage itself when i plug power supply cable on battery connector please help
Hey my phone was replaced. By a new screen ,but i went too replace it but then in 4 days my phone was working and after ,it wasnt touching and my phone has. Many lines on screen ,and dont have touch ,and things were missing. In my phone how can i fix
+Lee Satriani (satchY) I've actually never tried it or looked at schematics in a way to consider that. I did try once on a water damage data recovery job and the phone didn't fully power on. That wasn't a good test though because it was likely another issue causing the power up problem. I may test that this week on a donor board and see what happens.
It looks like the mysterious secondary issue is the pads becoming detached from the board, perhaps being lifted off the board by the ic solder ball. But the main issue is no underfill. Well Apple you saved 2 cents in underfill and caused a billion dollar secondary repair industry.
Yes but the only way I can help is for them to be sent here. If you've already tried screens, it is most likely the famous touch IC problem. Very sorry to hear about your luck. We have pricing and mail-in instructions on our website: www.ststele.com/special-services/
+STS Telecom So you use the flux + heat to remove the chip. You clean excess solder, then you use flux to refuse the new chip to the board? I thought you some how need to get solder back on the chip. Hope you can clarify.
I order these ICs with solder balls pre-attached to the bottom. The flux is just to be sure the solder flows easy when it melts in hopes of good joints on all of those pads under the chips.
I recently took my iphone 6 to a repair shop near me and my phone was brought back with cracks in the screen that weren't there before i'm not sure what to do. attempted to register for an account on your website, but the password i set didn't work when i tried logging in. i attempted to reset my password but that didn't work either. It only took me back to the login screen and asked for me to login again. Please help!
I've removed all traces of your registration from our system so if you try to register again it should work. It sounds like you just need a screen replacement though. You would be much better off to have that repaired locally rather than send it off to anyone.
Thanks for helping with the account problem, i actually replaced the screen myself. I've heard of a lot of people having this IC chip problem so I assumed that I was experiencing the same difficulty. i was going to attempt to fix this myself but it seemed a little too hard for me to do without assistance.
I did one video where I stretched it to the 1280x720 I'm recording at.. It looked pretty bad so I went ahead and left it 640x480. If all goes well, I will never use that microscope in a video again. LOL Thanks :)
hey man my iphone 6 motherboard all 4 lcd connectors are damaged and also it is heating a lot when trying boot up without the display can u please tell me what to do?
390C and 42% on this cheap station: www.amazon.com/Aoyue-852A-Digital-Rework-Station/dp/B000HDDXY0/ref=sr_1_1?ie=UTF8&qid=1483029705&sr=8-1&keywords=aoyue+hot+air
That's just awesome. Nice job. Subscribed to your channel after seeing you use kaplin tape to hold a PCB down which is what I do. Just starting learning this level of repair and learning a lot watching you, Jessa, a few others and working on some of the skeleton boards I have somehow accumulated after 6 months in the phone business. I will likely be a customer soon!
Thank you for watching :) I'll be posting as much as time allows.
Really awesome. I have two 6Plus with touch issues. wish I could find someone to fix it last guys messed me around. All the way in South Africa so yeah. Keep up the great work!
I noticed the lag when you where inspecting the pads, I thought it froze. If there is a lot of nasty stuff on the board, wouldn't it be better to re-clean the pads? I know you said they look good but....
how much do you charge to repair a 6plus with flickering and touchscreen unresponsiveness issues?
hey can u send me some info on price and where to send to do this repair on my iphone 6 plus touch ic?
Hi, I am really smart so I put a piece of tape on the touch ic chips hoping to temporarily fix the problem, only to have it not turn on at all. I checked for a short on vcc main and there is none. any advice on where to go from here?
Awesome video, I'm just setting out repairing phones got most of the stuff, but what flux do you use as I have been using kingbo and it doesn't seem to work as good as yours, kind regards.
I've been really liking Chipquik SMD291 :)
Thanks for watching!
Hi where are you located? I need mine to fix professionally
Hello I would love to get some prices on your service .. .. I have a iPhone xs max and the connector on the motherboard where the screen connector is damage.. and I want to get a price Quote ... I fixed iPhones but iam not as Advanced as you .. Excellent video ... also I can send it in ... ...thanks
salut chef t'es très doué ! franchement bravo
Thank you! :)
Hello sir I m almost all video seen ur video but I m asking one question please can u tell me iPhone 6s battery drain problem .....
And I m changing battery and display but issues is same please help me
HI man you´re the wire man you repair all iphones via soldering small wires tnx for share greetings from center part of >Mexico
Thanks man🙂 watching from philippines 🇵🇭
Very impressive videos. I know I need software like ZXW or Z3X with .brd files and PDF. I am looking for a tutorial for a start to finish board diagnostic. I know there are countless possibilities of problems but at least somewhere to start. Do you know if those programs have info like that?
Thanks
I've never seen anything with that info except for... I have seen some schematics that have diagnostic information in them. Many Samsung schematics will have some "check this, if it's not this check that then this..." flow charts that have helped me solve some Galaxy problems.
Thanks for videos, Jason!
You're welcome! Thanks for watching :)
Hi, i have an iphone 6 plus. after replacing touch have no image but after 20 seconds image appears. now do that without touch ic, i checked sage, cumulus,chesnut, resistance in conector, voltajes, but still the same. can you help me?
Can you tell me where you got those pointed q tips? They look better then what I use.
They're $50 special ESD safe Q-Tips.... I'm kidding - I buy them for $1 per pack at the Dollar General Store in the cosmetics section. :D They've been out for weeks though so I'm going to need to order some.
Wonderful repair, would be nice to see how to do the jumper :)
Wow, yeah - this video was back before I had a microscope camera. This one is a little more recent:
ua-cam.com/video/U2UMCzP3S0o/v-deo.html
HI can you please tell me the time and heat
you use? what about the flex tipe or brand? thankyou :)
You're welcome! Thanks for watching :)
I use my temp set on 390C most of the time. I am using a very cheap hot air station:
www.amazon.com/Aoyue-852A-Digital-Rework-Station/dp/B000HDDXY0/ref=sr_1_4?ie=UTF8&qid=1480427892&sr=8-4&keywords=aoyue+station
What board files are you using for the iPhones there? I'm working a lot of Openflex Boardview ( openboardview.org ) but I've not ever encountered an iPhone boardview file to test with it but it's definitely something I'd like to get working on it.
I'm using ZXW from www.zxwtools.com. I'm not sure where they get all of their information but it's pretty closed off. I have to plug in their USB license dongle to use it, then the board views are loaded from their servers as needed.
That explains things, as I know a lot of people have been hunting around for BRD type files for the iPhones (like the Macbooks/laptops), even if it meant writing another board format decoder in to it. Thanks for the reply.
Great video, Thank you. STS you really inspire me to reopen my computer shop.
That is really awesome to know. Thank you for commenting:)
...good work! like your videos. greetings from germany. ;)
Thank u for commenting :) Wife is from Germany. Hoping to get her back there to visit family one day.
How many degrees heat did you process ?
350 !
Hello, I do not understand I tried to change the two components that handles the touch for iphone 6 more then at the start do not want to be thank you for help me please
I'm a proud member of the Sea of Flux group. More flux=more better!
I also clean up my mess though.
I've been trying to cut back but it's not going too well. When I want to be sure - add more flux. :D
anyway you could show which pads on these chips on NC. Im just practicing on a board i bought that was iCloud locked and i can't find this info anywhere of course my 1st try I pulled a ton of pads. Just wondering thanks for videos Ive watched it a couple of times. Good tips on practicing?? Boards are expensive and then I'm never sure if i did it right if i buy a dead board. thanks
Sorry, I sure can't.. not without clicking every single pin. I was hoping it could highlight them all for you but it doesn't.
Thanks anyway man I'm going to buy the tool thank for responding keep it up!!
hi as it calls and where can I buy the white stylus that uses for cleaning the footsteps? Graces and regards Anthony Mastroianni
Thank you :) I think All-Spec sells those
can you repair my iphone x touch screen isuue ? i tried with different LCD screen but sitll not working .
HI, Can you tell me what heat and airflow that you use to remove the Ic please
I have the air set on 42% and the temperature set to 375C - 380C
thanks much appreciated
Hi sir i had i phone 6 plus touch problem i made jumper thats ok but now phone stuck on 0.2amp on power supply taking voltage itself when i plug power supply cable on battery connector please help
Wow !!! Amazing I know He was Happy! Definatly would like to use your service
Thanks for watching and commenting!
Hey my phone was replaced. By a new screen ,but i went too replace it but then in 4 days my phone was working and after ,it wasnt touching and my phone has. Many lines on screen ,and dont have touch ,and things were missing. In my phone how can i fix
hi need touch ic fixed on i6splus how do I get in touch
What is the name of the liquid you used to take off the ic chip?
solder paste
Hi question with the cumulus and mason removed would the iphone 6plus boot display ?
+Lee Satriani (satchY) I've actually never tried it or looked at schematics in a way to consider that. I did try once on a water damage data recovery job and the phone didn't fully power on. That wasn't a good test though because it was likely another issue causing the power up problem. I may test that this week on a donor board and see what happens.
+STS Telecom cool mate yeah would be interested to know thanks for the videos i enjoy watching them cheers
Hi Jason after much thought i gave it ago and yes it works fine :)
+Lee Satriani (satchY) thanks for letting me know!
no probs ;)
It looks like the mysterious secondary issue is the pads becoming detached from the board, perhaps being lifted off the board by the ic solder ball. But the main issue is no underfill. Well Apple you saved 2 cents in underfill and caused a billion dollar secondary repair industry.
Friend, where can i buy this schematic with the board conections?
You probably found it by now.. It's called ZXW from zxwtools.com
You can buy it from microsolderingsupply.com or aliexpress.com
if pads remouved there is nc pads not important
how to contact u to fix my touch ic ?THANKS !
Really good job ! Thank you for this video too !
This video mite be old but you are awesome !!!!!!!!!!!!!!!!!!
Some eBay repairs are top quality but you have to be careful because there are quite a few idiots on there.
Hi,
I've got 3 iPhone 6 Plus and the touch screen doesn't work. I've changed the screen but no joy. Please can you help!
Yes but the only way I can help is for them to be sent here. If you've already tried screens, it is most likely the famous touch IC problem. Very sorry to hear about your luck.
We have pricing and mail-in instructions on our website:
www.ststele.com/special-services/
hi.. i remove this touch ic now no disply coming only mobil chrgeing but disply not coming
what happend this plz tell me
love jumpers yeah !! perfect congrulations......
Thanks =) Gonna do a jumper video before long with the new microscope equipment.
Why ? Pcb stand not use
+STS Telecom So you use the flux + heat to remove the chip. You clean excess solder, then you use flux to refuse the new chip to the board? I thought you some how need to get solder back on the chip. Hope you can clarify.
I order these ICs with solder balls pre-attached to the bottom. The flux is just to be sure the solder flows easy when it melts in hopes of good joints on all of those pads under the chips.
I recently took my iphone 6 to a repair shop near me and my phone was brought back with cracks in the screen that weren't there before i'm not sure what to do. attempted to register for an account on your website, but the password i set didn't work when i tried logging in. i attempted to reset my password but that didn't work either. It only took me back to the login screen and asked for me to login again. Please help!
I've removed all traces of your registration from our system so if you try to register again it should work. It sounds like you just need a screen replacement though. You would be much better off to have that repaired locally rather than send it off to anyone.
Thanks for helping with the account problem, i actually replaced the screen myself. I've heard of a lot of people having this IC chip problem so I assumed that I was experiencing the same difficulty. i was going to attempt to fix this myself but it seemed a little too hard for me to do without assistance.
your 640x480 usb microscope should capture fullscreen if you use it as a source and capture with VLC
I did one video where I stretched it to the 1280x720 I'm recording at.. It looked pretty bad so I went ahead and left it 640x480. If all goes well, I will never use that microscope in a video again. LOL Thanks :)
amazing work
+BMWGamingHD thank u
how do I contact you for a repair
www.ststele.com/mail-in/
Thanks
how can I send mine in to u
Our website is the best way really.
www.ststele.com/mail-in/
Why? pcb stand use
Hello
Tanks you
Bat the name don't flux pen
Bests regards
can you fix galaxy note 5 logic boards too ?
I am trying to stay away from those as much as possible :)
ok
i fix so many tuch ic problem .
how i can send my iphone 6 plus? have the same problem
Here is our website: micro.repair
‘Sorry, couldn’t fix it’ is common. Don’t know why people advertise repairs when they are totally incapable of doing the work.
good job
Thank you :))
Tanks you
Best regards
Nice video. Hate "anywayS" - but that's not personal. ;)
LOL - Thanks!
Subscribed!
Nice one boss
The name product ?
I think you may have described a "flux pen". I'm not 100% sure though
you and ross channel are great!! i have a lot of board here at the shop i'll have to send out. I don't have time to do all of them.
The problem is the broken pad. Thats the cause of this issue, even before ebay guys touched it.
great job btw
+Lee Satriani (satchY) thanks :)
what if they think that the flux no need to clean because the tube says "no clean flux" :D
hey man my iphone 6 motherboard all 4 lcd connectors are damaged and also it is heating a lot when trying boot up without the display
can u please tell me what to do?
Doesn't your wife get pissed off when you take the wires out of her vibrator motors?
lol
make me your assistent........seriously
Is there anyone who does a Google job and can help me?? I ruined one of the connectors by pushing too hard😒 I don't want my phone ruined like this.
Temperature of hot air? and fan speed Please?
390C and 42% on this cheap station:
www.amazon.com/Aoyue-852A-Digital-Rework-Station/dp/B000HDDXY0/ref=sr_1_1?ie=UTF8&qid=1483029705&sr=8-1&keywords=aoyue+hot+air
STS Telecom Is this the station you use?
iPhone 6 Dispaly Failed !
ua-cam.com/video/VAbMy47RqyQ/v-deo.html
hi you r very cleaver but we don't need to see you . you can foucs the microscope on board . thanks
I understand if my good looks are bothering you. It's ok, cold shower - move on. :D
buuuurn! LMAO!