Це відео не доступне.
Перепрошуємо.
This 3D Printer is HUGE and FAST | Qidi X-Max 3 Review
Вставка
- Опубліковано 17 сер 2024
- For $949.00 USD, you can get this New QIdi Tech X-Max 3. It's Fast, It's Huge and can handle large 3D print jobs easily. In this video we will unbox and test out this all new printer to see how well this competitively priced 3D Printer works and if it is better than its competitors.
Purchase the QIDI X-Max 3 using following link: shrsl.com/4b2ez
Use the following Code to get $20 off your order: M3ZK
Purchase Fixdry Multi Color Filament Using the following link: bit.ly/474GYyR
10% off using the following code: Chris6
#3dprinting #3dprinter #qiditech #qidi #fast3dprinter #huge3dprinter #unboxingvideo #unboxing #review
◽️◽️◽️◽️◽️◽️
ADD ME ON...
INSTAGRAM: @clohofficial ► / clohofficial
TWITTER: @clohofficial ► / clohofficial
PATREON: / chrisloh
BLOG: clohofficial.com/
AMAZON STOREFRONT: www.amazon.com...
-----------
Video Gear I use:
📷 Sony a7iii - amzn.to/3CDzTJg
📷 Canon D80 - amzn.to/3bDkIO...
Audio Gear I use:
🎙️ Rode Wireless Go - amzn.to/3fXbX5...
🎙️ Samson G Track Pro - amzn.to/2WBF7Q...
🎙️ FiFine Wireless Microphone System - amzn.to/2zFIso...
🎙️ FiFine K678 Microphone - www.amazon.com...
Lighting Gear I use:
Graphy StudioFX Box Lights - amzn.to/3cFfmn...
Neewer Studio Lighting - amzn.to/3bAYFs...
All Equipment and Editing Equipment that I use:
kit.co/clohoff...
-----------
Music Track by:
Main: From UA-cam Library
-----------
⬇️ WATCH MORE VIDEOS ⬇️
/ cloh761
/ @everyday-unboxing
/ @3uildstudio
Purchase using the following link: shrsl.com/4b2ez
Use the following Code to get $20 off your order: M3ZK
Man , you need to do more gym 😂I was unboxing this printer as well , and it’s was much easier for me 😊Great review!
I cleaned my build plate properly before printing and I've never had to use the glue stick on pla, petg, or tpu. All 3 adhere great and mostly break free an their own when the plate cools. I'm using Qidi pla and petg filament with their profiles and polymaker tpu with my own profile based on my test results. You may need to adjust your bed or nozzle temps for your filament.
Cleaning the plate helped with the adhesion. Thanks for the tip and advice
I don’t understand the hate for gluestick. I use glue stick as extra insurance on my textured PEI plates. One application will last me 500-700 print hours before a reapplication. Primarily printing PAHT/PA12 and PET-CF.
Some textured buildplates are not "clean" from the factory... try to wash it with warm water and dishwashing liquid to get of any greases and stuff... it may help...
Thanks for the tip! It started to work better after I cleaned it with Alcohol. Have to wash it anyways, so I'll try your recommendation
*I love mine too!*
Thanks for the video. Did you try taking the build plate off and bending it? usually does the trick.
Sounds like you may have not understood hot to use a printer, or this one….that print should have taken about 35 mins. And it is a flex plate….you should have easily got it off had you removed the plate and kept it clean etc.
I use 3dLac for my beds. Works fine. To get my prints of I use water.
I'll have to try that. Probably a lot less messy than a glue stick
Possible you don’t have enough cooling. Try printing with the door and top open.
True. I found that if I clean the bed it works better as well.
you can get a camera for htis. Qidi sells it.
Thanks. I'll have to check it out. What do you think about the quality of the camera?
@@3uilDStudio The camera output looks great.
Everybody doing these reviews compares this qidi with bambulab, which is just ridiculous and lazy. the bambulab is significantly smaller and significantly more expensive. It would be much more of interest some examples of settings, as well as large prints done on it as part of the review. And regarding 600mm/s speed!? Has the reviewer really printed at this speed? All in all - a lazy review.