2023 FRC - Team 971's robot in action at San Francisco Regional
Вставка
- Опубліковано 2 жов 2024
- Spartan Robotics Team 971 competed in the 2023 San Francisco Regional. These highlights are extracted from a few of their competition matches.
Photos are available through the team's website: frc971.org/photos
wonderful robot, really stands out between all of the swerve bots around this year
best part about using tank drive in a world full of swerve is being able to just plow through everything 😎 1:09
Except me lol. Skip to 1:44 in Qual 62 ua-cam.com/video/Gr6s7ZttfVU/v-deo.html But still ofc they are a crazy incredible robot
W
8006 could stop em there sds
It's the sturdiness of the arm that surprises me most.
Where did you get 6 inch colson wheels?
They are 5" colsons, from McMaster.
Hey I was remembering at SFR that I noticed that you guys had a super cool way of attaching your bumpers to your robot frame. What kind of hardware did you use to do it?
From the 971 photo archive (frc971.org/photos): 1) photos.app.goo.gl/UnkK7a9KyweSxy1E6; 2) photos.app.goo.gl/Zj49JYPkSEc3vive6; this is one from 2019: 3) photos.app.goo.gl/2hwJooK4KkgqsWkA9; this one also from 2019 shows the large flat round heads on the bolts: 4) photos.app.goo.gl/X5HDcVg76goKak376; another from 2019 which shows the plates which are part of the robot frame and capture the bolts: photos.app.goo.gl/EHGSxiXjrmBrP1gL7; and one more from 2020 which shows the construction technique: photos.app.goo.gl/DKiR9FjjBbPYfUah8
@@smanrobotics Thank you so much for the really fast and helpful response! I love the bumper design with the swept/raised front and back too.
@@smanrobotics Sorry to bother you again, I have another question about the last photo that shows the construction technique. I assume that the metal piece that is being installed on the bumper goes through the bumper wood and that is what the nut in the first photo is attaching to? That metal piece looks custom made but I am wondering how the whole mounting system was made. Did you take a threaded rod and attach it to that piece being installed on the bumpers in the last photo? Sorry if this is a bit much to ask.
JG, sorry for the delayed response. Thank you for your interest in the 971 bumper attachment design. For many years, we tried something new every year, and then a few years ago we settled on the design you see now. The part on the bumper with the threaded rod is an off the shelf part. McMaster part # 97590A445
= www.mcmaster.com/catalog/129/3575/97590A445. Note: to tighten the nuts and ensure the bumper does not slide up during a match, we tighten the nuts with a ratcheting wrench.
splatoon dynamo