T190. Had bad battery. Changed. New battery went bad. Changed alternator & battery. Runs great. Control panel won't light. Arms & tracks locked. Has 2600hr. Dealer hasn't been able to help at this time 😂. Changed solenoids & fuses. Arm sensor is good Would be so grateful for any direction to look. Please help in Florida 😁
A Caterpillar Track Skid Steer 279C suddenly stopped moving, including the work tools, engine starts fine. It provides an error 2471-3 which ti my understanding is for the cab door switch, the with bypass was hook up, didn't work; the wires to the ECM do have continuity Advice on addressing this issue will be appreciated
Have 216b and was moving along hit a bump and breaks locked up. Then the break light was flashing but couldn’t the arm arm light was on had to plug in seat belt but break still locked and can’t release break by pushing switch. Now when tried to start unit all light go off when arms down and you can turn break off but no start nothing. Has power from battery. Getting ready to check fuses.
Tim Jackman hey Tim my name is Luke with c&e pipeline we rented a grinding head from y’all this week and the head release will not let the pins release . What can I do to fix this ? The motor is working but the cylinder won’t pick up the pins all the way
Working on a 426B Backhoe cat 🐈 1997 Have a transmission problem when machine is running it seems to create back pressure and pushes transmission fluid up and out filler tube it seemed to have the correct amount of fluid come out when I drained it. Around 2-1/2 gallons, it seems to of only taken 2 maybe 2-12 quart and if I let it run it seems to backup or climb backup the tube. Any help would be great thanks 🤔🙃
I have a 2015 year 299D Cat xps high flow two speed - it will not go into high gear? and cat service dept. said I have to buy a wire harness that would cost $3,000 to 4,000 dollars. But I replace the joy stick that didn't fix the problem ( first they said it was the joy stick -- Not) . Back to the wire harness would you think that would be the problem. I did order a wire dia. Please reply it would be really appreciate
Hi there please let me know how to I turn on system heater my machine.I has bought it summer but not check system heater,I was wondering if it has switch to turn on the heating?
I JUST GOT 2014 CATERPILAR 242D TURBO 2 SPEED . WHICH HAS NO DISPLAY WORKING .. I TOOK THE RISK TO BUY LIKE THAT WITHOUT EVEN POSSIBILITY TO CHECK THE HOURS ON THE MEETER .. BUT IS TIGHT MACHINE AND RUN LIKE NEW . WHAT COULD BE THE POSSIBLE TROUBLE WITH THE COLOR DISPLAY NOT WORKING AT ALL ... ?? THANKS STAN
I have a Cat 247, 2000 model, rarely the left side will stop. I can rev eng up and jiggle the joy stick and it will start again. done this about 3 times in 50 hours, any ideas?
i have a 763 bobcat and it dont have the power it use the have when i push the drive handles forward it bogs down and the belt make nose it also does it when i moving and try the rase or lower the bucket. i do know my drive motor on the left leaks a tiny bit.. i been useing r&o hydralic fluid.. i changed the filter a few months ago and chande hydralic fluid
My 2012 262c cat skid steer drive joy stick, when I use it for a full minute without letting it drop in nuteural, the machine starts slowing down and eventually stops. Drop it in nuteural and things work fine for another minutes and then same thing. What's going on??
They want you to go to the dealer for everything me and 2 other guys changed both tracks on a 287b in 4 hours and they wanted 9 thousand dollars to do it and the hydraulic lines start breaking when they get old so if you have to pay them 1000 dollars to change one every time one breaks you might as well buy a new machine with good lines😂
I work on several Cats and John Deere A/C systems. Right now I am working on a 450F backhoe, can not find the receiver dryer and I believe the orifice tube is in the drier. Is there any site I can reference schematics for several models of Cats?
The Parking Brake on my 2008 256C Skid Steer keeps coming on automatically -- preventing me from moving more than a few feet at a time. ( I had allowed the hydraulic fluid level to drop down below the "add line", -- and while the bucket and grapple continued to work, -- I assumed that was the cause of the Parking Brake problem. -- I just had enough Hydo Advance 10 fuild on hand to bring it up to the lower mark on the sight glass, but that hasn't solved the problem.) I can only move a few feet at a time -- although when the engine is reved-up it will move a little further before automatically setting again. Is it possible that a "code" may need to be reset ? -- and if so, how would I do that ? Any help would be appreciated.
+Daryl Tracy -- yes, after 3 Service calls from Cat that included new Speed Sensor and Park Brake Solenoid, Installation of newest software, Calibration of Joystick, Pump and Motors --- and $2,330.61 !! -- Thanks for enquiring.
I have a parking brake problem also . Some one told me John Deere is green for all the money you spend , and CAT Is yellow because your skin turns yellow from shock once you know how expensive it is.
I Got the same problem and have seen it on many 2 others at work. Not very impressed with CAT . One tech told me I should buy A takeuchi I'm like thanks not what do I Do with my POS
T190. Had bad battery. Changed. New battery went bad. Changed alternator & battery. Runs great. Control panel won't light. Arms & tracks locked. Has 2600hr. Dealer hasn't been able to help at this time 😂. Changed solenoids & fuses. Arm sensor is good Would be so grateful for any direction to look.
Please help in Florida 😁
A Caterpillar Track Skid Steer 279C suddenly stopped moving, including the work tools, engine starts fine. It provides an error 2471-3 which ti my understanding is for the cab door switch, the with bypass was hook up, didn't work; the wires to the ECM do have continuity
Advice on addressing this issue will be appreciated
Have 216b and was moving along hit a bump and breaks locked up. Then the break light was flashing but couldn’t the arm arm light was on had to plug in seat belt but break still locked and can’t release break by pushing switch.
Now when tried to start unit all light go off when arms down and you can turn break off but no start nothing. Has power from battery. Getting ready to check fuses.
MORE VIDEOS OF DALE!
Tim Jackman hey Tim my name is Luke with c&e pipeline we rented a grinding head from y’all this week and the head release will not let the pins release . What can I do to fix this ? The motor is working but the cylinder won’t pick up the pins all the way
What is the best way to change the dpf filter on a 259d track skid steer?
this is about the radio in a backhoe why does it shut off while driving/ raising rpms
Good Morning
I have a cat 277c that won’t turn right. I changed both speed sensors.
Any idea what could be.
Ty
Can I hose down the engine compartment and under the cab or is that not recommended? I don’t want to create any electrical problems
I have a 2005 cat 257b skid steer when I unlock the safety to travel it locks the breaks and want move. What do I need to check
Working on a 426B Backhoe cat 🐈 1997 Have a transmission problem when machine is running it seems to create back pressure and pushes transmission fluid up and out filler tube it seemed to have the correct amount of fluid come out when I drained it. Around 2-1/2 gallons, it seems to of only taken 2 maybe 2-12 quart and if I let it run it seems to backup or climb backup the tube. Any help would be great thanks 🤔🙃
How do I locate the bucket position sensor on 247, where is it and what does it look like.
I have a CAT 279C that turns on the warning light and locks the parking brake when going in reverse. What could be my problem?
whats up with Cat skid steer parking brake buttons problems seems like it's a common problem I have came across 3 myself that have had this issue.
I have a 2015 year 299D Cat xps high flow two speed - it will not go into high gear? and cat service dept. said I have to buy a wire harness that would cost $3,000 to 4,000 dollars. But I replace the joy stick that didn't fix the problem ( first they said it was the joy stick -- Not) . Back to the wire harness would you think that would be the problem. I did order a wire dia. Please reply it would be really appreciate
I replaced the batteries but I’m not getting power into the cab
Hi there please let me know how to I turn on system heater my machine.I has bought it summer but not check system heater,I was wondering if it has switch to turn on the heating?
On a 226B, I am losing oil at a concerning rate through the dip stick??
I JUST GOT 2014 CATERPILAR 242D TURBO 2 SPEED . WHICH HAS NO DISPLAY WORKING .. I TOOK THE RISK TO BUY LIKE THAT WITHOUT EVEN POSSIBILITY TO CHECK THE HOURS ON THE MEETER .. BUT IS TIGHT MACHINE AND RUN LIKE NEW .
WHAT COULD BE THE POSSIBLE TROUBLE WITH THE COLOR DISPLAY NOT WORKING AT ALL ... ??
THANKS
STAN
I have a Cat 247, 2000 model, rarely the left side will stop. I can rev eng up and jiggle the joy stick and it will start again. done this about 3 times in 50 hours, any ideas?
i have a 763 bobcat and it dont have the power it use the have when i push the drive handles forward it bogs down and the belt make nose it also does it when i moving and try the rase or lower the bucket. i do know my drive motor on the left leaks a tiny bit.. i been useing r&o hydralic fluid.. i changed the filter a few months ago and chande hydralic fluid
I have a 289 C fuel gauge does not work do you have any solutions
How to change the RHS joystick on a 257b bobcat
My CAT 303.5 don’t start. Hoy i release the brakes to put it in a tow truck?
My 2012 262c cat skid steer drive joy stick, when I use it for a full minute without letting it drop in nuteural, the machine starts slowing down and eventually stops. Drop it in nuteural and things work fine for another minutes and then same thing. What's going on??
Dave I have a 1997 L's 190 new Holland skidsteer and I would like to ask how do I remove the fuel tank?
Hi I have a 257b how do you replace the hydraulic fluid with new
fuel gauge doesn't work on a 226 B skid steer how do I check the fuel level
They want you to go to the dealer for everything me and 2 other guys changed both tracks on a 287b in 4 hours and they wanted 9 thousand dollars to do it and the hydraulic lines start breaking when they get old so if you have to pay them 1000 dollars to change one every time one breaks you might as well buy a new machine with good lines😂
I have a caterpillar 289c my instruments and fuel gauge are not working do you have a solution for me
I work on several Cats and John Deere A/C systems. Right now I am working on a 450F backhoe, can not find the receiver dryer and I believe the orifice tube is in the drier. Is there any site I can reference schematics for several models of Cats?
Hi dale I have a 226 cat skid won’t move the release break
I replace the relays I can’t find the Hydrostatic Solenoid
The Parking Brake on my 2008 256C Skid Steer keeps coming on automatically -- preventing me from moving more than a few feet at a time. ( I had allowed the hydraulic fluid level to drop down below the "add line", -- and while the bucket and grapple continued to work, -- I assumed that was the cause of the Parking Brake problem. -- I just had enough Hydo Advance 10 fuild on hand to bring it up to the lower mark on the sight glass, but that hasn't solved the problem.) I can only move a few feet at a time -- although when the engine is reved-up it will move a little further before automatically setting again. Is it possible that a "code" may need to be reset ? -- and if so, how would I do that ?
Any help would be appreciated.
+Dave Fisher did you figure out your park brake issue
+Daryl Tracy -- yes, after 3 Service calls from Cat that included new Speed Sensor and Park Brake Solenoid, Installation of newest software, Calibration of Joystick, Pump and Motors --- and $2,330.61 !! -- Thanks for enquiring.
I have a parking brake problem also . Some one told me John Deere is green for all the money you spend , and CAT Is yellow because your skin turns yellow from shock once you know how expensive it is.
I have a 232b caterpillar skid steer, the parking breake do not release, I would appreciate if somebody can help
We used to have the same problem, check under the seat, it has a sensor Or at least ours has a sensor, that could be the problem. Good look!
how do I flip cab open or remove
Hello I have a question on 262C and the 262C series 2 is there a significant difference between them?
Concrete 4nu
Guns
Cat 246c what problem engine failior.malfunction
cat 226b flashing park and seat belt signs
the parking won't release. why?
I Got the same problem and have seen it on many 2 others at work. Not very impressed with CAT . One tech told me I should buy A takeuchi I'm like thanks not what do I Do with my POS
My226 cat skidsteer will not disengage.
I have 248 hi flo engine runs,cooling fan works,no steer no lift please help. thanks ,rshirk
Hey dale
my cat d9h dozer on over heating
Hey dale